Question 1

Monitoring table - moneo RTM - release notes - version 1.10

Accepted Answer

Further benefits, further information: the digital outputs of an ifm diagnostic electronics for vibration sensors (VSE) can now be detected and used in moneo.

Configured switching outputs with pre-alarm or main alarm are displayed in moneo with warnings or alarms and are thus visible in the Monitoring table.

Question 2

Monitoring table - moneo RTM - release notes - version 1.9

Accepted Answer

The monitoring table now visualises not only the violations of the static thresholds in yellow (warning) and red (alarm), but also those of the dynamic ones: the ISO thresholds that were set using the AVA wizard, the smart limits of the DataScience Toolbox and the object limits of sensors connected to a VSE.

Question 3

Monitoring table - moneo RTM - release notes - version 1.7

Accepted Answer

As long as an IO-Link device does not send a live event, moneo displays the last stored events (max. five) in the "Monitoring table". As soon as a new event occurs, it is listed in moneo.

Question 4

Dashboard – moneo RTM – release notes – version 1.12

Accepted Answer

Clear dashboard design The display of data on dashboards can now be set to be semi-transparent, making the graphics and images behind them more visible and the whole dashboard easier to read. To do this, select "Enable transparent background" in Edit instrument in edit mode.

Question 5

Dashboard – moneo RTM – release notes – version 1.11

Accepted Answer

The link icons of linked dashboards now directly visualise violations of limits on underlying dashboards: yellow = warnings, red = alarms. This way, several dashboards in large system structures can be monitored at a single glance.

Question 6

Dashboard - moneo RTM - release notes - version 1.10

Accepted Answer

Further benefits, further information: the digital outputs of an ifm diagnostic electronics for vibration sensors (VSE) can now be detected and used in moneo.

Configured switching outputs with pre-alarm or main alarm are displayed in moneo with warnings or alarms and are thus visible in the Dashboard.

A new data visualisation tool is available: the pointer. It visually resembles a measuring device with minimum and maximum values and is particularly suited for indicating speed, pressure, flow, current or acceleration. It is now also the default display tool for this type of data.

Question 7

Dashboard - moneo RTM - release notes - version 1.9

Accepted Answer

The dashboard now visualises not only the violations of the static thresholds in yellow (warning) and red (alarm), but also those of the dynamic ones: the ISO thresholds that were set using the AVA wizard, the smart limits of the DataScience Toolbox and the object limits of sensors connected to a VSE.

Question 8

Dashboard - moneo RTM - release notes - version 1.8

Accepted Answer

For each new device there is a default dashboard with all available data sources which can be edited and renamed intuitively and quickly via "Edit dashboard" while the initial dashboard always remains available as default.

Question 9

Dashboard - moneo RTM - release notes - version 1.7

Accepted Answer

Users can add links to easily navigate between dashboards.

Question 10

Analysis – moneo RTM – release notes – version 1.13

Accepted Answer

Thanks to manual scaling of the y-axis, you now get an even better depth of analysis!
Drill down into data sources and zoom in on your process values for even more granular insights.

Did you do an analysis some time ago? Now you can easily find them again with the tabular view of all stored analyses.
By the way, you always have the most important analyses in view, because they can now be linked on the home screen .

Question 11

Analysis - moneo RTM - release notes - version 1.10

Accepted Answer

Further benefits, further information: the digital outputs of an ifm diagnostic electronics for vibration sensors (VSE) can now be detected and used in moneo.

Configured switching outputs with pre-alarm or main alarm are displayed in moneo with warnings or alarms and are thus visible in the Analysis.

Question 12

Tasks and tickets - moneo RTM - release notes - version 1.10

Accepted Answer

Further benefits, further information: the digital outputs of an ifm diagnostic electronics for vibration sensors (VSE) can now be detected and used in moneo.

Configured switching outputs with pre-alarm or main alarm are displayed in moneo with warnings or alarms. What is more, they can even be used in Tasks & Tickets for further information purposes without having to be configured in moneo beforehand (this is because the monitoring already takes place in the diagnostic electronics).

Question 13

Tasks and tickets - moneo RTM - release notes - version 1.8

Accepted Answer

If a ticket created by moneo has been sent to an external system (SAP) and gets lost, e.g. because the connection failed, the administrator can now close or delete the ticket.

Question 14

Settings and rules - moneo RTM - release notes - version 1.9

Accepted Answer

It is possible to define in the ticket processing rules that the alarm or warning tickets caused by object limit violations of VSE data sources will also be sent to external systems (e.g. by mail).

Question 15

Settings and rules - moneo RTM - release notes - version 1.7

Accepted Answer

Tickets created in moneo can now be sent to an external system (SAP) to perform further activities, e.g. create maintenance tasks. Under "Ticket processing rules" you can define which tickets are to be sent.

More information: "moneo shop floor integration in SAP".

Question 16

Device management – moneo OS – release notes – version 1.13

Accepted Answer

Now you have an even better overview of your Infopoints!
From now on, you can see in your topology tree how many infopoints you are using in which area.

Question 17

Device management – moneo OS – release notes – version 1.12

Accepted Answer

Simple device identification In the device management, devices can now be connected using their host name instead of their IP address. This makes it much easier to identify devices on networks with dynamic IP addresses.

User access can be restricted to a part of the topology tree (e.g. a plant, a production line or a specific machine). Administrators can now easily define the visibility and thus access to location elements and sibling nodes for user groups using drag & drop in the Navigator.

This means, for example, that all kinds of maintenance tasks can only be made available to the user groups responsible for them.

Such an authorisation concept also ensures that users only receive notifications (warnings and alarms) that are within their area of responsibility.

The names of the devices in the navigator now follow the logic that if a user-defined name is assigned, it is used in the navigator. If the user-defined name is not assigned, the configured name is displayed. If this is also not assigned, the ifm product name appears.

If the user-defined name is edited in the device management, it is also adapted in the navigator.

Question 18

Device management – moneo OS – release notes – version 1.11

Accepted Answer

From now on, updates for subsequent expansion of datasources without data loss is possible with an associated agent connector.

Question 19

Device management - moneo OS - release notes - version 1.9

Accepted Answer

Object limits of sensors connected to a VSE are now transferred to moneo. When the VSE and sensors are onboarded, they will be available directly in moneo and then trigger alarms and warnings in the event of threshold violations.

Question 20

Device management - moneo OS - release notes - version 1.8

Accepted Answer

In the device management native units of data sources can be converted live by moneo for display (Presentation unit) and will be shown in the monitoring table, for example.

Question 21

Calculated values – moneo OS – release notes – version 1.11

Accepted Answer

In a data flow model, the function block for publishing the calculated value has a new Boolean input: the latter can be used to define a condition according to which the calculated value will only be published if the condition is true. In this way, the calculated values can be related to the machine status, for example.

Question 22

Calculated values - moneo OS - release notes - version 1.10

Accepted Answer

Six new arithmetic function blocks

As of version 1.10, the Calculated values function in moneo now includes six new arithmetic function blocks to generate even more customised information based on the incoming data.

Question 23

Calculated values - moneo OS - release notes - version 1.9

Accepted Answer

In a data flow model, the function blocks in the function library are now sorted alphabetically. This also applies to the categories of the user-defined units and the units themselves.

Question 24

Calculated values - moneo OS - release notes - version 1.8

Accepted Answer

The "Data Flow Modeler" now supports direct control via keyboard, in addition to the mouse. Furthermore helpful tooltips are displayed when the pointer hovers over buttons and icons.

Question 25

Calculated values - moneo OS - release notes - version 1.7

Accepted Answer

In "Calculated values" there is a new function block for a data flow model: "Piece counter". If sensors are connected accordingly, moneo can count trigger signals in a data flow model. For example: switching operations or good and bad parts.

In a data flow model it is possible to define custom units for output values and display them on the "Dashboard" or in the "Monitoring table", for example.

In a data flow model, the run mode "onChange" can be used for high-frequency process values. This means that a new value is immediately taken into account as soon as it changes.

In a data flow model the function block "Counter" offers a new signal connector: "Reset". If the "Reset value" is reached, the "Time counter" or "Piece counter" sets the current value to 0.

If an SMTP server is set up in the "Email channel settings", moneo sends an e-mail to new users when they are created in the "User management". Users receive a notification within moneo if the SMTP server does not work.

Question 26

Connected devices – moneo configure – release notes – version 1.13

Accepted Answer

With the 3rd Party Master interface, it is now possible to parameterize IO-Link masters from different manufacturers using configure free.

Of course, you can extend configure free as usual. For example, with the GSDML Module Extension License (QMP031).

Question 27

Connected devices - moneo configure - release notes - version 1.10

Accepted Answer

IO-Link masters with DigitalOut ports now also enable PdOut settings under the Connected devices section in moneo

IO-Link masters with DigitalOut ports now also enable PdOut settings under the Connected devices section in moneo.

List of favourites / view 1 - connected devices in moneo

List of favourites / view 2 - connected devices in moneo

As of now, the list of favourites is available! Devices found via the network search can be added to freely defined lists and then quickly accessed without having to perform another network search.

Connected devices / Dashboard / Better visualisation / Full screen

For better visualisation, the dashboard can now be expanded to full screen size in the connected devices view.

Question 28

Connected devices - moneo configure - release notes - version 1.9

Accepted Answer

The name of the app tile in the moneo home area has been changed from "Configure device" to "Connected devices".

The ifm memory plug saves the configuration of IO-Link devices and is now also supported by moneo. In the parameter view, it is possible to switch between the parameters of the memory plug and those of the connected device.

Question 29

Configure device - moneo configure - release notes - version 1.8

Accepted Answer

With the new add-on, the GSDML file for a PLC can be generated in the GSDML management for connected masters (AL14xx) and IO-Link sensors. The parameter setting of the GSDML file is easily done via the known interface by checkboxes of the parameters that are to be written into the GSDML file.

In addition to dashboards for process data from sensors, they can now also be displayed for IO-Link masters and provide a good overview of the internal temperature and voltage of a master.

Each moneo release includes the latest firmware for IO-Link masters, which can be easily and quickly transferred to the devices.

Question 30

Saved configurations – moneo configure – release notes – version 1.13

Accepted Answer

Do you want to parameterize several machines at the same time with one click?

It's possible! Now you can save, import and export the parameter set of an IO-Link master, including its connected devices.

This means a huge time saver for you.

Question 31

Saved configurations – moneo configure – release notes – version 1.12

Accepted Answer

The option to save all configurations of the IO-Link master and the connected sensors in one file saves a lot of time. When exporting saved configurations of the ifm masters, the saved configurations of all connected sensors are now also saved in the .lrp file.

Question 32

Saved configurations – moneo configure – release notes – version 1.11

Accepted Answer

It is now possible to import several saved configurations from the LR DEVICE software (.lrp) in a zip file.

Question 33

Saved configurations - moneo configure - release notes - version 1.9

Accepted Answer

Now IO-Link masters (devices with an ifm IoT core) can also be configured offline, thus offering time savings because the individual configurations of the sensors no longer need to be saved, but the configuration of the masters including the sensors can be saved without the devices being connected to moneo.

Saved configurations from the LR DEVICE software (in .lrp format) can now be imported into moneo.

Question 34

Device descriptions - moneo configure - release notes - version 1.9

Accepted Answer

The name of the app tile in the moneo home area has been changed from "IODD Management" to "Device descriptions".

Question 35

DataScience Toolbox – release notes – version 1.13

Accepted Answer

Do you need help defining the limit values? Our advanced health indicators now take care of this for you! Limits are created and suggested fully automatically, and all you have to do is apply them.

Keeping track of and analysing health indicators is now even easier: view the evolution of your health indicators with one click on your dashboard.

Question 36

DataScience Toolbox – release notes – version 1.12

Accepted Answer

Trends, level changes and volatility: now it is very easy to recognise these patterns. This is possible with the new tool of the moneo|DataScience Toolbox the PatternMonitor. It enables automatic anomaly detection of individual critical process variables (e.g. temperature, flow, vibration, etc.). Using statistical methods, the tool checks whether an unexpected pattern occurs. In this way, the behaviour of the critical process variables is permanently monitored and the user is automatically informed of significant deviations.

QM9105

The SmartLimitWatcher has two new health indicators that make it easier to track a developing problem. These indicators evaluate both the monitoring quality and the alarm frequency.

A change in the monitoring quality indicator shows that the original condition at the time of monitoring no longer exists. This should be checked and the monitoring readjusted. The alarm frequency, on the other hand, indicates how many times the limit has been exceeded in a given period of time.

False alarms can be avoided with the new ticket response delay in the SmartLimitWatcher: it prevents immediate creation of a ticket. A ticket is only created if the process value exceeds the limit value x times in succession.

Question 37

Data Science Toolbox - release notes - version 1.8

Accepted Answer

In the Smart Limit Watcher, there is a tabular overview per device for location elements or other higher-level nodes in the navigator of how many (active) profiles have been created.

Question 38

Raw data recording – moneo RTM – release notes – version 1.12

Accepted Answer

Tickets generated by calculated values and limit violations of SmartLimits can also be used as triggers for raw data recording.

Tickets generated by the PatternMonitor can also be used as triggers for raw data recording.

Question 39

AVA raw data - moneo RTM - release notes - version 1.9

Accepted Answer

The list of data recordings has been revised to show even more information and provide a better overview. Now multiple recordings can be deleted at the same time.

Question 40

AVA raw data - moneo RTM - release notes - version 1.8

Accepted Answer

For analysis purposes a rotational speed info can be added in the recording settings of a raw data recording for VVB or VSE devices. In addition to a constant speed as a reference, a speed data source can be added per drag&drop from the navigator.

Question 41

edgeConnect – moneo OS – release notes – version 1.13

Accepted Answer

Changes to the sent message formats can be handled even more easily.
Gain even easier insight into the origin of your sensor data.

Now you get even more flexibility to connect to existing systems and platforms such as MQTT Broker, AWS IoTcore, and Azure IoT Hub.

Question 42

edgeConnect – moneo OS – release notes – version 1.12

Accepted Answer

With the new connector licence (QMC136) for an OPC UA server in moneo, it is possible in a simple and standardised way to provide process data that can be retrieved by external OPC UA clients. The data (including calculated values) is available for further use and processing, for example in planning systems for maintenance purposes.
The required data is simply activated for provision in the data management.

QMC136

Plug-and-play connection A new connector enables communication with devices with ifm IoTCore interface. ifm IoTCore is a communication protocol that is implemented in more and more ifm devices. moneo, for example, enables use cases with wireless vibration sensors in conojunction with this new connector licence and the compatible devices. The first ifm IoTCore implementation in an ifm device is the gateway (ZB0929) for data acquisition from wireless VWV vibration sensors.

QMC005

For further information: Smart vibration monitoring without cabling.

Question 43

edgeConnect – moneo OS – release notes – version 1.11

Accepted Answer

The current process data, complete with indication of unit and info about the last update, are now also displayed for each connected data source in the Data Management.

Using the AWS, Azure and MQTT connectors, the contents of warning and alarm tickets can now also be sent in JSON format to external target systems.

Question 44

edgeConnect - moneo OS - release notes - version 1.10

Accepted Answer

Cloud connectors - Azure or AWS

With the new cloud connectors, which are included as of moneo version 1.10, it is now possible to send the data available in moneo to the Azure or AWS clouds, thus paving the way for further processing and use of the obtained data or of calculated values.

The Azure IoT Hub or AWS IoT Core can be quickly selected and easily configured via target systems and "Add new target". The required connector needs to be licensed beforehand:

For the purpose of cost optimisation, the frequency per seconds of the data to be sent can now also be set between one second and one hour as of moneo version 1.10 onwards, provided a target system (MQTT or cloud service) is connected and the transmission of a data source activated.

Question 45

edgeConnect - moneo OS - release notes - version 1.9

Accepted Answer

This new function provides the necessary connectivity to forward and process data from moneo to third-party systems via MQTT. When the MQTT broker is connected, the data to be sent can be selected in the table under "Data Management".

Question 46

Miscellaneous – release notes – version 1.13

Accepted Answer

Be up to date with the automatic update notification in moneo itself!
A working internet connection is required.

By the way: moneo is now also available in Polish.

Question 47

Miscellaneous – release notes – version 1.12

Accepted Answer

When tickets of warnings and alarms (e.g. for automatic notification and order creation) are transferred to SAP, a unique ID can now be assigned to a moneo system. This has the decisive advantage that several moneo systems can now transfer tickets to the SAP system via the SFI interface. The moneo systems can be identified with this ID.

For further information: Shop Floor Integration (SFI): the connection to SAP ERP

Question 48

Miscellaneous – release notes - version 1.10

Accepted Answer

As of this version, moneo also supports a light mode in addition to the dark mode

As of this version, moneo supports a light mode in addition to the dark mode. The user can switch between the two modes at any time via the user management.

Question 49

Miscellaneous - release notes - version 1.9

Accepted Answer

In the Me area, the following areas have been renamed/added: moneo version number, open source licences

Now the free moneo trial version is available!
When moneo is installed on a system for the first time, the software can initially be tested free of charge for 30 days in the functional scope "parameter setting" or "condition monitoring including parameter setting":
With the moneo configure SA trial version, devices can be configured quickly and easily.
In addition to parameter setting, the moneo condition monitoring trial version also offers dashboards, data analyses and alarms in the event of threshold violations.
More information at www.moneo-trial.ifm.

Question 50

AMS – moneo appliance – release version 1.11

Accepted Answer

moneo vAppliance can now also be run on a Microsoft Hyper-V Server 2019.

The Appliance Management System is no longer only available in English and German, but also in French, Spanish, Portuguese, Chinese, Japanese and Korean.

Question 51

AMS - moneo appliance - release notes - version 1.10

Accepted Answer

With version 1.10, the moneo appliance and underlying operating system are getting the latest security updates.

Local backups can now also be copied to USB devices.

In the AMS network settings in it is now possible to use DNS alias names. moneo can be addressed in the network via the full qualified domain name (FQDN) of the host, for example.

moneo release notes

Monitoring table

Dashboard

Analysis

Tasks and tickets

Settings and rules

Device management

Calculated values

Connected devices

Saved configurations

Device descriptions

DataScience Toolbox

Raw data recording

AVA wizard

edgeConnect

Miscellaneous

Appliance Management System

moneo RTM - Monitoring table, Dashboard, Analysis, Tasks and tickets, Settings and rules, Raw data recording, AVA wizard

moneo configure - Connected devices, Saved configurations, Device descriptions

DataScience Toolbox - SmartLimitWatcher

Information points and connectors

Optimize your production in real time

Use cases/success stories

Get advice from our experts