You probably do not come from: South Africa.  If necessary, change to: United States
  1. moneo: IIoT platform
  2. Use cases

Use cases

As world market leader in automation technology, we closely follow our customers’ requirements.

With moneo, we offer you a future-oriented digital tool for long-term successful industrial evolution. You, too, can start today with the digital possibilities of tomorrow.

More customers' experiences ➜

There are many applications for our solutions. We have worked out some use cases.

Do you have other ideas or requirements?
We will be glad to offer you our expertise and advice.


Pump monitoring in a CIP plant using the moneo SmartLimitWatcher

In this use case, a supply pump– one of the central elements of a CIP plant– is to be monitored in order to detect and signal any anomalies in time. The example illustrates the use of moneo|RTM for data recording and visualisation. Using the SmartLimitWatcher function of the DataScienceToolbox, a model is calculated that monitors the pump after a teach-in phase and reports any deviations.

Monitoring conductivity in a CIP plant

Ensuring process steps in process plant cleaning. Conductivity sensors are ideally suited for use in the food industry. They detect the conductivity and concentration of different media and can differentiate between e.g. cleaning agents, rinsing water, and the food product. This means that it is not only possible to constantly track the product but also to reduce the waste of product and rinsing water– all without making adjustments to the sensor. Precise, fast and reliable process measurements help to improve plant availability and optimise cleaning cycles.

Volumetric flow monitoring of a CIP plant using moneo RTM

Cleaning process control in the food and beverage industry When processing biological substances destined for consumption, such as milk, strict hygiene is vital. One of the decisive factors for a perfect cleaning result is the flow and thus the mechanical effect.

Temperature monitoring in a CIP plant

A CIP set is a process plant commonly found in the food and beverage industry, which undergoes cleaning in place (CIP). When processing biological substances destined for consumption, such as milk, strict hygiene is vital to prevent the introduction of harmful germs that could endanger the health of consumers.

Control cabinet monitoring

Control cabinet monitoring with moneo RTM

Condition monitoring of electrical components In a control cabinet, electrical and electronic components are protected from dust and water as well as electromagnetic and mechanical influences that can lead to damage or failure. Waste heat produced by the components and site-related temperature fluctuations can cause overheating and increased humidity due to condensation. In order to be able to restore the ideal conditions quickly, the control cabinet is monitored.

Filter monitoring

Monitoring the water filters in cooling circuits with moneo RTM

Condition-based filter maintenance in systems with heat exchangers using moneo RTM Microfilters in ifm prover gmbh’s cooling circuits ensure that their systems with heat exchangers run smoothly. The filters protect the heat exchangers in the connected machines by removing impurities from the cooling water. This important filter element must be serviced and changed regularly. Permanent monitoring optimises this process and guarantees continuous operation of the systems.

Monitoring the air filters in production with moneo RTM

Visualisation and analysis of filter conditions. The central ventilation system at ifm prover gmbh is to be monitored. This includes the filters for the air supply and exhaust as well as the filters of the workstation exhaust system on the ground floor and the first floor. In principle, filters are, in simplified terms, a resistor in a system. Foreign particles that do not belong to the medium clog the open meshes or pores of the filter.

Consumption monitoring

Consumption metering via pulse outputs or an S0 interface using moneo RTM

With little effort and without interfering with existing systems, consumption data can be recorded and used to optimise energy consumption: On the one hand potential energy savings are shown, on the other hand it becomes evident where energy is wasted.

Consumption monitoring

Visualisation and analysis of the consumption of cooling circuits in production using moneo RTM

Level monitoring

Level monitoring in drums with two-component casting resin at ifm prover gmbh

The internal control of the installation for potting terminal devices of ifm prover monitors, among other things, the level of the drums. If one of the drums is underfilled, a lamp signals the necessity to change the drum. If the signal and, thus, the required drum change is detected too late, production stops will occur, mainly because the filling with casting resin cannot be carried out in the appropriate time.

Level monitoring in a calibration plant

Level monitoring on cold and hot water tanks. To ensure maximum measuring accuracy, both hot and cold water is sent through the sensors. The measured values are used for calibration.

Piece counting

Counting of workpiece carrier circulations using moneo RTM

Circulation counter in the plasma activation process of a production machine for electronic modules. The workpiece carriers in a production machine for electronic modules are subject to wear due to friction, impacts and plasma activation. To safeguard product quality, the workpiece carriers must be in faultless condition. Regular maintenance and replacement is thus necessary.

Quantity-based maintenance of wear parts using moneo RTM

Counting of embossing operations with a LOGO! mini controller. During the assembly of pressure sensors at a work station, parts for pressure sensors are embossed with an automatic embossing machine. The embossing stamp is particularly subject to wear. The level of wear primarily depends on the number of processed workpieces.

Optimised maintenance of wear parts at a final test station with moneo RTM

Change of maintenance strategy towards condition-based maintenance at ifm prover gmbh. Product quality is a significant success factor for ifm. For the purpose of quality control, a final inspection of pressure sensors is carried out at various workstations at ifm prover. Different types of production equipment are used. In some cases, electrical contact between the production equipment and the tested pressure sensors is established via an M12 connector. The constant friction caused by connecting the sensors results in wear of the socket on this connector. Consequently, the production equipment must be replaced regularly.

Counting of cycles on a knuckle-joint press

Quantity-based process monitoring for quality assurance

Piece counting of good/bad parts produced

At ifm prover, different components for pressure sensors are produced on an automated production plant. At the end of the production process, the good and bad parts are separated.

Vibration monitoring

Vibration monitoring of fans in a central extraction system at ifm prover gmbh

In an extraction system in the production hall, the fan performance is decisive. Soldering fumes and fine dusts produced by laser marking must be properly extracted. If there is no permanent fan monitoring, there is a risk that the plant might suddenly fail. Fine dusts produced by laser marking that are not properly extracted will lead to a loss of quality. Special care should also be taken with soldering fumes because they are highly hazardous to health. Last but not least, there is the risk of a total failure of the entire production area if machines come to a standstill because waste heat cannot be adequately dissipated.

Motor health

Wire feed motor current monitoring system improves robotic welding performance

ifm’s moneo Real-Time Monitoring System improves robot welding performance by monitoring the current of weld feed speed to the welding gun. Overload and underload spikes are identified and allows the operator the opportunity to correct the wire feed for uninterrupted production.