ifm Subsidiary Selection
Europe
America
Asia/Pacific
Africa
Language
Language
  • English
Trade partners
You probably do not come from: Ireland. If necessary, change to: United States
News Career Sustainability Contact
Supply Chain
Service hotline +3531 461 3200
  1. Products
  2. Sensors
  3. Vibration sensors
  4. Diagnostic electronics
  5. VSE150

Diagnostic electronics for vibration sensors

VSE150

DIAGNOSTIC ELECTRONICS

Diagnostic electronics for vibration sensors VSE150
Diagnostic electronics for vibration sensors VSE150
Diagnostic electronics for vibration sensors VSE150
Diagnostic electronics for vibration sensors VSE150
Diagnostic electronics for vibration sensors VSE150
Diagnostic electronics for vibration sensors VSE150

Diagnostic electronics for vibration sensors

VSE150

DIAGNOSTIC ELECTRONICS

  • For the reliable vibration monitoring of machines and equipment
  • Condition-based maintenance thanks to monitoring of unbalance, rolling element bearing or gear state
  • Dynamic inputs for simultaneous detection of up to four vibration sensors
  • Two switching outputs for pre-alarm and main alarm
  • Analogue inputs for monitoring further physical measurands
  • ce
  • ukca
  • cul
  • profinet
Product characteristics
Frequency range [Hz] 0.1...12000
Communication interface Ethernet
Application
Design parameter setting via PC software VES004
Application continuous vibration monitoring
Electrical data
Operating voltage tolerance [%] 20
Operating voltage [V] 24 DC; (when using the IEPE input: 24 V + 20%; IEPE = Integrated Electronics Piezo Electric)
Current consumption [mA] 200; ((24 V DC))
Protection class III
Inputs / outputs
Total number of inputs and outputs 8; (configurable)
Number of inputs and outputs Number of analogue inputs: 2; number of dynamic inputs: 4; Number of digital outputs: 2; Number of analogue outputs: 1
Inputs
Total number of inputs 6
Number of analogue inputs 2
Analogue input (current) [mA] 4...20
Resolution of analogue input 12
Number of dynamic inputs 4
Dynamic input - signal 0...10 mA / IEPE / 4...20 mA
Dynamic input - resolution [bit] 16
Dynamic input - frequency range [Hz] 0,1...12000
Dynamic input - sampling rate [kSamples] 100
Outputs
Total number of outputs 2
Output signal switching signal; analogue signal
Electrical design PNP
Number of digital outputs 2; (configurable)
Output function normally open / normally closed; (parameterisable)
Max. voltage drop switching output DC [V] 2
Permanent current rating of switching output DC [mA] 100
Number of analogue outputs 1; (configurable)
Analogue current output [mA] 4...20
Max. load [Ω] 500
Short-circuit protection yes
Type of short-circuit protection pulsed
Overload protection yes
Measuring/setting range
Frequency range [Hz] 0.1...12000
Interfaces
Communication interface Ethernet
Transmission rate 10 MBaud; 100 MBaud
Protocol PROFINET IO
Operating conditions
Ambient temperature [°C] 0...60
Storage temperature [°C] 0...60
Protection IP 20
Tests / approvals
EMC
EN 61000-4-2 ESD 4 kV contact discharge / 15 kV air discharge
EN 61000-4-3 10 V/m (80...2700 MHz)
EN 61000-4-4 Burst 4 kV capacitive coupling probe, earthed
EN 61000-4-6 10 V 0,15...80 MHz
EN 61000-6-4 industrial environments
MTTF [years] 92
UL approval
Ta 0...60 °C
Enclosure type open Type
power supply Limited Voltage/Current
UL Approval no. L001
Mechanical data
Weight [g] 415.2
Housing plastic housing
Type of mounting rail; (TH35/EN60715)
Dimensions [mm] 114.2 x 50 x 105.3
Materials PA
Data memories
Real-time clock yes
Accessories
Accessories (optional)
cross-over Ethernet patch cable for the direct connection to the PC
Remarks
Pack quantity 1 pcs.
Electrical connection
Connection COMBICON:
ifm electronic gmbh • Friedrichstraße 1 • 45128 Essen — We reserve the right to make technical alterations without prior notice. — EN-GB — VSE150-00 — 13.04.2023 —