Products
NS5009

Induktiver NAMUR-Sensor

NS5009

IS-22,5-N/0,095M/1D/1G/2G

Induktiver NAMUR-Sensor

NS5009

IS-22,5-N/0,095M/1D/1G/2G

Article no longer available - archive entry

Alternative articles: NS5002 Product comparison: NS5009 / NS5002 When selecting an alternative article and accessories please note that technical data may differ!

Product characteristics

Electrical design	NAMUR
Output function	normally closed
Sensing range [mm]	2.5
Housing	rectangular

Electrical data

Connection to switching amplifiers	yes
Switching amplifiers	connection to certified intrinsically safe circuits with the max. values: U = 15 V / I = 50 mA / P = 120 mW
Nominal voltage DC [V]	8.2; (1kΩ)
Supply voltage DC [V]	7.5...30; (when used outside the hazardous area)
Current consumption [mA]	< 1; (disabled; conductive: > 2,1)
Protection class	III

Outputs

Electrical design	NAMUR
Output function	normally closed
Permanent current rating of switching output DC [mA]	30; (when used outside the hazardous area)
Switching frequency DC [Hz]	800

Detection zone

Sensing range [mm]	2.5
Real sensing range Sr [mm]	2.5 ± 10 %

Accuracy / deviations

Correction factor	steel: 1 / stainless steel: 0.7 / brass: 0.5 / aluminium: 0.4 / copper: 0.3
Hysteresis [% of Sr]	1...15
Switch point drift [% of Sr]	-10...10

Operating conditions

Ambient temperature [°C]	-20...70
Protection	IP 67

Tests / approvals

Approval

PTB 02 ATEX 2217; BVS 04 ATEX E153; IECEx BVS 06.0003

ATEX marking

II 1D Ex ia IIIC T90° C Da Ta: -20...70° C

II 1G Ex ia IIB T6 Ga Ta: -20...70° C

II 2G Ex ia IIC T6 Gb Ta: -20...70° C

EMC

EN 60947-5-6

Shock/vibration resistance

30 g (11 ms) / 10-55 Hz (1 mm)

Safety classification

Max. internal capacitance [nF]	80
Max. internal inductance [µH]	110

Mechanical data

Weight [g]	0.05
Housing	rectangular
Mounting	flush mountable
Materials	PBT

Remarks

Pack quantity	1 pcs.

Electrical connection

Connection	Cable: 0.095 m, PVC; 2 x 0.14 mm²

ifm electronic gmbh • Friedrichstraße 1 • 45128 Essen — EN-GB — NS5009 — 08.07.2013 —