| Product characteristics |
| Output function |
normally open / normally closed; (selectable) |
| Sensing range [mm] |
15 |
| Housing |
threaded type |
| Dimensions [mm] |
M30 x 1.5 / L = 151 |
| Electrical data |
| Operating voltage [V] |
20...250 AC/DC |
| Protection class |
II |
| Reverse polarity protection |
no |
| Outputs |
| Output function |
normally open / normally closed; (selectable) |
| Max. voltage drop switching output DC [V] |
8 |
| Max. voltage drop switching output AC [V] |
10 |
| Minimum load current [mA] |
5 |
| Max. leakage current [mA] |
2.5 (250 V AC) / 1.7 (110 V AC) / 1.5 (24 V DC) |
| Permanent current rating of switching output AC [mA] |
130; (250 (...40 °C) 250 (...50 °C); when used outside the hazardous area: 200 (...70 °C)) |
| Permanent current rating of switching output DC [mA] |
130; (250 (...40 °C) 250 (...50 °C); when used outside the hazardous area: 200 (...70 °C)) |
| Short-time current rating of switching output [mA] |
1500; (20ms / 0,5Hz) |
| Switching frequency AC [Hz] |
25 |
| Switching frequency DC [Hz] |
50 |
| Short-circuit proof |
no |
| Overload protection |
no |
| Detection zone |
| Sensing range [mm] |
15 |
| Sensing range adjustable |
yes |
| Factory setting sensing range [mm] |
15 |
| Real sensing range Sr [mm] |
15 ± 10 % |
| Accuracy / deviations |
| Correction factor |
glass: 0.4 / water: 1 / ceramics: 0.2 / PVC: 0.2 |
| Hysteresis [% of Sr] |
1...15 |
| Switch point drift [% of Sr] |
-15...15 |
| Operating conditions |
| Ambient temperature [°C] |
-20...60 |
| Note on ambient temperature |
| when used outside the hazardous area: -25...70 °C |
|
| Protection |
IP 54; (when used outside the hazardous area: IP 65) |
| Increased immunity |
yes |
| Tests / approvals |
| ATEX marking |
 II 3D Ex tD A22 IP54 T80°C X |
| EMC |
|
| MTTF [years] |
294 |
| Mechanical data |
| Weight [g] |
0.161 |
| Housing |
threaded type |
| Mounting |
non-flush mountable |
| Dimensions [mm] |
M30 x 1.5 / L = 151 |
| Thread designation |
M30 x 1.5 |
| Materials |
PBT; PA |
| Tightening torque for cable gland [Nm] |
2.7; (maximum: 3,5) |
| Displays / operating elements |
| Display |
| switching status |
1 x LED, yellow |
|
| Electrical connection |
| Required protection |
miniature fuse to IEC60127-2 sheet 1; ≤ 2 A; fast acting; Place the fuse outside the hazardous area. |
| Accessories |
| Accessories (supplied) |
| lock nuts: 2 |
| screwdriver: 1 |
|
| Remarks |
| Remarks |
| Recommendation: Check the safe functioning of the unit after a short circuit. |
| Special conditions for safe operation apply for use in hazardous areas. |
| Observe the corresponding notes in the operating instructions (Ex protection related part). |
|
| Notes |
discontinued article |
| Pack quantity |
1 pcs. |
| Electrical connection |
| Connection |
terminals: ...2.5 mm²; Cable sheath: Ø 5.5...13 mm; Cable gland: M20 X 1.5 |
