| Product characteristics |
| Electrical design |
PNP/NPN |
| Output function |
normally open |
| Sensing range [mm] |
4 |
| Housing |
threaded type |
| Dimensions [mm] |
M12 x 1 |
| Application |
| Installation |
for valves; (76...101,6 (NW 80...100)) |
| Electrical data |
| Operating voltage [V] |
10...36 DC |
| Protection class |
III |
| Reverse polarity protection |
yes |
| Outputs |
| Electrical design |
PNP/NPN |
| Output function |
normally open |
| Max. voltage drop switching output DC [V] |
4.6 |
| Minimum load current [mA] |
4 |
| Max. leakage current [mA] |
0.6 |
| Permanent current rating of switching output DC [mA] |
150 |
| Switching frequency DC [Hz] |
1500 |
| Short-circuit protection |
yes |
| Type of short-circuit protection |
pulsed |
| Overload protection |
yes |
| Detection zone |
| Sensing range [mm] |
4 |
| Real sensing range Sr [mm] |
4 ± 10 % |
| Operating distance [mm] |
0...3.25 |
| Accuracy / deviations |
| Correction factor |
steel: 1 / stainless steel: 0.7 / brass: 0.4 / aluminium: 0.3 / copper: 0.2 |
| Hysteresis [% of Sr] |
1...15 |
| Switch point drift [% of Sr] |
-10...10 |
| Operating conditions |
| Ambient temperature [°C] |
-25...80 |
| Protection |
IP 65 |
| Tests / approvals |
| EMC |
|
| Mechanical data |
| Housing |
threaded type |
| Mounting |
non-flush mountable |
| Dimensions [mm] |
M12 x 1 |
| Thread designation |
M12 x 1 |
| Materials |
PBT; Target: stainless steel (1.4301 / 304) |
| Displays / operating elements |
| Display |
| switching status |
1 x LED, yellow |
|
| Accessories |
| Accessories (supplied) |
|
| Remarks |
| Remarks |
| Note: |
| The sensors are adjusted with the enclosed target flag. |
| If an older type of target flag is used, there is a risk of mechanical damage to the sensor if they are not adjusted properly. |
|
| Pack quantity |
1 pcs. |
| Electrical connection - plug |
|
Connector: 1 x valve plug type A DIN (DIN EN 175301-803) |
