Products
TAP961

Temperature transmitter

TAP961

TAP040KLES30-PRAVG/US/

Temperature transmitter

TAP961

TAP040KLES30-PRAVG/US/

Article no longer available - archive entry

Product characteristics

Measuring range

-25...150 °C

-13...302 °F

Process connection

G 1 Aseptoflex Vario

Application

System	gold-plated contacts
Measuring element	1 x Pt 1000 + 1 x NTC; (thermically coupled, with backup function (temperature measuring even if one of the two sensor elements fails))
Application	Suitable for all standard CIP and SIP processes
Media	liquids and gases
Pressure rating [bar]	50
Minimum installation depth [mm]	15
No dead space	yes

Electrical data

Operating voltage [V]	9...32 DC; (to SELV/PELV)
Current consumption [mA]	< 15.6; (max. fault current : 21,8)
Protection class	III
Reverse polarity protection	yes
Power-on delay time [s]	35
Integrated watchdog	yes

Outputs

Overload protection	yes

Measuring/setting range

Probe length L [mm]

Measuring range

-25...150 °C

-13...302 °F

Drift warning

0.2...5 °C

0.4...9 °F

Drift alarm

0.2...5 °C

0.4...9 °F

In steps of

0.05 °C

0.1 °F

Accuracy / deviations

Drift monitoring [K]	± 0,2 (-10...100°C); ± 0,3 (-25...-10/100...150°C) *); (probe completely inserted into the measured medium up to the sealing chamfer)
Temperature coefficient [% of the span / 10 K]	< ± 0,01; (In case of deviation from the reference condition 25 ± 5 °C)

Reaction times

Dynamic response T05 / T09 [s]	6 / 13
Max. measuring/display cycle [ms]	600

Software / programming

Parameter setting options	parameter setting to PROFIBUS PA profile temperature transmitter, version 3.01; I&M-Parameter; drift and diagnostic function

Operating conditions

Ambient temperature [°C]

-25...70

Note on ambient temperature

electronics: -25...70 °C

Process connection: -32...170 °C

Storage temperature [°C]

-40...85

Protection

IP 68; IP 69K

Tests / approvals

EMC

DIN EN 61000-4-2 ESD	4 kV CD / 8 kV AD
EN 61000-4-3 HF radiated	10 V/m
DIN EN 61000-4-4 Burst	2 kV
EN 61000-4-6 HF conducted	10 V

Shock resistance

DIN IEC 68-2-27

50 g (11 ms)

Vibration resistance

DIN EN 60068-2-6

20 g (10...2000 Hz)

Note on approval

Including free 5-point calibration certificate.

Mechanical data

Material	stainless steel (1.4404 / 316L); PEI; FKM
Materials (wetted parts)	stainless steel (1.4404 / 316L)
Process connection	G 1 Aseptoflex Vario
Surface characteristics Ra/Rz of the wetted parts	Ra: < 0.6

Remarks

n.c. = not used

cULus - Class 2 source required

9...24 V DC when used inside the hazardous area

Pack quantity

1 pcs.

Electrical connection

Connection	Connector: 1 x M12; Contacts: gold-plated

ifm efector, inc. • 1100 Atwater Drive • Malvern • PA 19355 — We reserve the right to make technical alterations without prior notice. — EN-US — TAP961-00 — 02.07.2009 —