Products
PN7001

Pressure sensor with display

PN7001

PN-250-SBR14-QFRKG/US/ /V

Pressure sensor with display

PN7001

PN-250-SBR14-QFRKG/US/ /V

Two programmable switching outputs
With long-term stability thanks to high overload protection
Lifespan of more than 100 million pressure cycles
Clearly visible numerical display
Country-specific pressure units selectable

Convenient operation via buttons or parameter setting via IO-Link

Article to be discontinued

Alternative articles: PN7071 Product comparison: PN7001 / PN7071 When selecting an alternative article and accessories please note that technical data may differ!

Product characteristics

Number of inputs and outputs

Number of digital outputs: 2

Measuring range

0...250 bar

0...3625 psi

0...25 MPa

Process connection

threaded connection G 1/4 Internal thread

Application

System

gold-plated contacts

Application

for industrial applications

Media

liquids and gases

Conditionally suitable for

use in gases at pressures > 25 bar only on request

Medium temperature [°C]

-25...80

Min. bursting pressure

850 bar

12300 psi

85 MPa

Pressure rating

400 bar

5800 psi

40 MPa

Type of pressure

relative pressure

Electrical data

Operating voltage [V]	18...36 DC; (to SELV/PELV)
Current consumption [mA]	< 35
Min. insulation resistance [MΩ]	100; (500 V DC)
Protection class	III
Reverse polarity protection	yes
Overvoltage protection	yes; (< 40 V)
Power-on delay time [s]	0.3
Integrated watchdog	yes

Inputs / outputs

Number of inputs and outputs	Number of digital outputs: 2

Outputs

Total number of outputs	2
Output signal	switching signal; IO-Link; (configurable)
Electrical design	PNP/NPN
Number of digital outputs	2
Output function	normally open / closed; (configurable)
Max. voltage drop switching output DC [V]	2
Permanent current rating of switching output DC [mA]	250
Switching frequency DC [Hz]	< 170
Short-circuit protection	yes
Type of short-circuit protection	yes (non-latching)

Measuring/setting range

Measuring range

0...250 bar

0...3625 psi

0...25 MPa

Set point SP

2...250 bar

40...3620 psi

0.2...25 MPa

Reset point rP

1...249 bar

20...3600 psi

0.1...24.9 MPa

In steps of

1 bar

20 psi

0.1 MPa

Factory setting

	SP1 = 63 bar	rP1 = 58 bar
	SP2 = 188 bar	rP2 = 183 bar

Accuracy / deviations

Switch point accuracy [% of the span]	< ± 0,5
Repeatability [% of the span]	< ± 0,1; (with temperature fluctuations < 10 K)
Characteristics deviation [% of the span]	< ± 0,25 (BFSL) / < ± 0,5 (LS); (BFSL = Best Fit Straight Line; LS = limit value setting)
Hysteresis deviation [% of the span]	< ± 0,25
Long-term stability [% of the span]	< ± 0,05; (per 6 months)
Temperature coefficient zero point [% of the span / 10 K]	0,2; (0...80 °C)
Temperature coefficient span [% of the span / 10 K]	0,2; (0...80 °C)

Reaction times

Delay time programmable dS, dr [s]	0; 0,2...50

Software / programming

Parameter setting options	hysteresis / window; normally open / closed; Diagnostic function; switching logic; switch-on/switch-off delay; Damping; Display unit

Interfaces

Communication interface

IO-Link

Transmission type

COM2 (38,4 kBaud)

IO-Link revision

1.1

SDCI standard

IEC 61131-9 CDV

Profiles

no profile

SIO mode

yes

Required master port class

Process data analog

Process data binary

Min. process cycle time [ms]

2.3

Supported DeviceIDs

Type of operation	DeviceID
default	308

Operating conditions

Ambient temperature [°C]	-20...80
Storage temperature [°C]	-40...100
Protection	IP 67

Tests / approvals

EMC

EN 61000-4-2 ESD	4 kV CD / 8 kV AD
EN 61000-4-3 HF radiated	10 V/m
EN 61000-4-4 Burst	2 kV
EN 61000-4-5 Surge	0,5/1 kV
EN 61000-4-6 HF conducted	10 V

Shock resistance

DIN IEC 68-2-27

50 g (11 ms)

Vibration resistance

DIN IEC 68-2-6

20 g (10...2000 Hz)

MTTF [years]

219

Pressure equipment directive

sound engineering practice; can be used for group 2 fluids; group 1 fluids on request

Mechanical data

Weight [g]	263.4
Material	stainless steel (1.4301 / 304); stainless steel (1.4404 / 316L); PC; PBT; PEI; FKM
Materials (wetted parts)	stainless steel (1.4305 / 303); ceramics; FKM
Min. pressure cycles	100 million
Process connection	threaded connection G 1/4 Internal thread
Restrictor element integrated	no (can be retrofitted)

Displays / operating elements

Display

Display unit	3 x LED, green
Switching status	2 x LED, yellow
Function display	alphanumeric display, 4-digit
Measured values	alphanumeric display, 4-digit

Remarks

Pack quantity	1 pcs.

Electrical connection

	Connector: 1 x M12; coding: A; Contacts: gold-plated

ifm efector, inc. • 1100 Atwater Drive • Malvern • PA 19355 — We reserve the right to make technical alterations without prior notice. — EN-US — PN7001-03 — 30.10.2013 —