1. Homepage
  2. Products
  3. AC2509

Article no longer available - archive entry

Alternative article: AC5209 – Product comparison: AC2509 / AC5209
Note any deviating technical data for the selection of the alternative article and the accessories.
Discontinued article

AC2509

AS-Interface ClassicLine module

ClassicLine90 4DI 4DO T M12

{{'OPTIONAL_INFO' | productAvailability | error}}

Dear customer,
Unfortunately, this data sheet is not available in the requested language. If you have any further questions, you can contact us by e-mail.

Best regards
Your ifm team

  • ce
  • asi
  • cul
Download
Technische Details
Electrical data
Operating voltage [V] 26.5...31.6 DC
Max. current consumption from AS-i [mA] 250
Max. current load total [A] 2
Integrated watchdog yes
Inputs / outputs
Number of inputs and outputs Number of digital inputs: 4; Number of digital outputs: 4
Inputs
Number of digital inputs 4
Input circuit of digital inputs PNP
Sensor supply of the inputs AS-i
Voltage supply [V] 18...30; (via flat cable)
Max. total current rating of inputs [mA] 200
Input current High [mA] 6...10
Input current low [mA] 0...2
Min. switching level high signal [V] 11
Digital inputs protected against short circuits yes
Outputs
Electrical design AS-i
Number of digital outputs 4
Circuit PNP
Voltage range DC [V] 15...30; (to PELV; via flat cable; for cULus the voltage must comply with the values specified in "Limited Voltage/Current")
Max. current load per output [mA] 1000; (utilization category DC-13 (control of electromagnets): 20 W (IEC 60947-5-1); according to cULus: 700 mA)
Short-circuit proof yes
Electrically separated yes
Operating conditions
Ambient temperature [°C] -25...70
Protection IP 67
Tests / approvals
EMC
EN 50295
MTTF [years] 171
AS-i classification
AS-i version 2.1
AS-i addressing IR addressing possible
Extended addressing mode possible no
AS-i profile S-7.0.E
AS-i I/O configuration [hex] 7
AS-i ID code [hex] 0.E
AS-i certificate 39301
Data bits
Data bit D0 D1 D2 D3
Input 1 2 3 4
Socket I-1 I-2 I-3 I-4
Pin 2+4 2+4 2+4 2+4
Output 1 2 3 4
Socket O-1 O-2 O-3 O-4
Pin 4 4 4 4
Mechanical data
Weight [g] 192
Type of mounting AS-i interface to FC-E lower parts
Material PBT
Displays / operating elements
Display
Power LED, green
errors LED, red
Function LED, yellow
Accessories
Accessories (optional)
Module lower part
Remarks
Remarks
Inputs and outputs must be electrically isolated.
Do not connect any of the following points to an external potential:
I-, I+, I1, I2, I3, I4
The connections are electrically connected with the AS-i cable.
Notes Discontinued article
Pack quantity 1 pcs.
Electrical connection
contact pins to module lower part, FK-E:
Connector: M12
ifm efector, inc. • 1100 Atwater Drive • Malvern • PA 19355 — We reserve the right to make technical alterations without prior notice. — EN-US — AC2509-00 — 04.09.2013 —