Продукти
PI2692

Flush pressure sensor with display

PI2692

PI-100-REA01-MFRKG/US/ /P

Flush pressure sensor with display

PI2692

PI-100-REA01-MFRKG/US/ /P

Вимірювання рівня та контроль граничного рівня за допомогою аналогового / комутаційного виходу
Стійкі до чищення під високим тиском з агресивних засобів для чищення
Для застосування при високій температурі
Високий ступінь захисту для відповідності вимогам харчової та питної промисловості
Монтаж врівень у контейнерах, резервуарах і трубах

Article no longer available - archive entry

Alternative articles: PI2602 Product comparison: PI2692 / PI2602 When selecting an alternative article and accessories please note that technical data may differ!

Product characteristics

Number of inputs and outputs

Number of digital outputs: 1; Number of analogue outputs: 1

Measuring range

-1...100 bar

-15...1450 psi

-0.1...10 MPa

Process connection

threaded connection G 1 external thread sealing cone

Application

Special feature

Gold-plated contacts

Application

flush mountable for the food and beverage industry

Installation

freely rotatable housing 350°

Media

viscous media and liquids with suspended particles; liquids and gases

Conditionally suitable for

use in gases at pressures > 25 bar only on request

Medium temperature [°C]

-25...125; (145 max. 1h)

Min. bursting pressure

650 bar

9425 psi

65 MPa

Pressure rating

200 bar

2900 psi

20 Mpa

Type of pressure

relative pressure

No dead space

yes

Electrical data

Operating voltage [V]	18...32 DC
Current consumption [mA]	< 50
Min. insulation resistance [MΩ]	100; (500 V DC)
Protection class	III
Reverse polarity protection	yes
Power-on delay time [s]	0.5
Integrated watchdog	yes

Inputs / outputs

Number of inputs and outputs	Number of digital outputs: 1; Number of analogue outputs: 1

Outputs

Total number of outputs	2
Output signal	switching signal; analogue signal; (configurable)
Electrical design	PNP/NPN
Number of digital outputs	1
Output function	normally open / normally closed; (parameterisable)
Max. voltage drop switching output DC [V]	2
Permanent current rating of switching output DC [mA]	250
Switching frequency DC [Hz]	6
Number of analogue outputs	1
Analogue current output [mA]	4...20, invertible; (scalable 1:4)
Max. load [Ω]	(Ub - 10 V) / 20 mA
Analogue voltage output [V]	0...10, invertible; (scalable 1:4)
Min. load resistance [Ω]	2000
Short-circuit protection	yes
Type of short-circuit protection	pulsed
Overload protection	yes

Measuring/setting range

Measuring range

-1...100 bar

-15...1450 psi

-0.1...10 MPa

Set point SP

-0.8...100 bar

-13...1450 psi

-0.08...10 MPa

Reset point rP

-1...99.8 bar

-15...1448 psi

-0.1...9.98 MPa

Analogue start point

-1...75 bar

-15...1088 psi

-0.1...7.5 MPa

Analogue end point

24...100 bar

348...1450 psi

2.4...10 MPa

In steps of

0.1 bar

1 psi

0.01 MPa

Factory setting

	SP1 = 25.0 bar	rP1 = 23.0 bar
	ASP = 0.0 bar	AEP = 100.0 bar

Accuracy / deviations

Switch point accuracy [X21]	< ± 0,5; (Turn down 1:1)
Repeatability [X21]	< ± 0,1; (with temperature fluctuations < 10 K; Turn down 1:1)
Characteristics deviation [X21]	< ± 0,5; (Turn down 1:1 , linearity, incl. hysteresis and repeatability , limit value setting to DIN EN IEC 62828-1)
Linearity deviation [X21]	< ± 0,15; (Turn down 1:1)
Hysteresis deviation [X21]	< ± 0,15; (Turn down 1:1)
Long-term stability [X21]	< ± 0,1; (Turn down 1:1; per year)
Temperature coefficient zero point [X22]	< ± 0,2; (0...70 °C)
Temperature coefficient span [X22]	< ± 0,2; (0...70 °C)

Response times

Response time [ms]	< 100
Damping process value dAP [s]	0.1...100
Damping for the analogue output dAA [s]	0.1...100
Step response time analogue output [ms]	25

Software / programming

Parameter setting options	hysteresis / window; normally open / normally closed; switching logic; current/voltage output; Damping; adaptation of displayed values; display can be rotated and switched off; Display unit; zero point; span

Operating conditions

Ambient temperature [°C]	-25...80
Storage temperature [°C]	-40...100
Protection	IP 67; IP 69K

Tests / approvals

EMC

EN 61000-4-2 ESD	4 kV CD / 8 kV AD
EN 61000-4-3 HF radiated	10 V/m
EN 61000-4-4 Burst	2 kV
EN 61000-4-5 Surge	0,5/1 kV
EN 61000-4-6 HF conducted	10 V

Shock resistance

DIN IEC 68-2-27

50 g (11 ms)

Vibration resistance

DIN IEC 68-2-6

20 g (10...2000 Hz)

Mechanical data

Weight [g]	456
Materials	stainless steel (1.4404 / 316L); PC; PBT; PEI; FKM; PTFE
Materials (wetted parts)	ceramics; PTFE; stainless steel (1.4435 / 316L); surface characteristics: Ra < 0,4 / Rz 4
Min. pressure cycles	100 million
Process connection	threaded connection G 1 external thread sealing cone

Displays / operating elements

Display

Display unit	4 x LED, green
switching status	LED, yellow
function display	alphanumeric display, 4-digit
measured values	alphanumeric display, 4-digit

Display unit

bar; psi; MPa; % of the span

Remarks

The 3-A qualification is only valid if adapters with 3-A qualification are used for installation.

Pack quantity

1 pcs.

Electrical connection

Connection	Connector: 1 x M12; coding: A; Contacts: gold-plated

ifm electronic gmbh • Friedrichstraße 1 • 45128 Essen — We reserve the right to make technical alterations without prior notice. — UK-UA — PI2692-00 — 21.11.2012 —