Question 1

Monitoring table - moneo RTM - release notes - version 1.10

Accepted Answer

Further benefits, further information: the digital outputs of an ifm diagnostic electronics for vibration sensors (VSE) can now be detected and used in moneo.

Configured switching outputs with pre-alarm or main alarm are displayed in moneo with warnings or alarms and are thus visible in the Monitoring table.

Question 2

Monitoring table - moneo RTM - release notes - version 1.9

Accepted Answer

The monitoring table now visualises not only the violations of the static thresholds in yellow (warning) and red (alarm), but also those of the dynamic ones: the ISO thresholds that were set using the AVA wizard, the smart limits of the DataScience Toolbox and the object limits of sensors connected to a VSE.

Question 3

Monitoring table - moneo RTM - release notes - version 1.7

Accepted Answer

As long as an IO-Link device does not send a live event, moneo displays the last stored events (max. five) in the "Monitoring table". As soon as a new event occurs, it is listed in moneo.

Question 4

Dashboard - moneo RTM - release notes - version 1.10

Accepted Answer

Further benefits, further information: the digital outputs of an ifm diagnostic electronics for vibration sensors (VSE) can now be detected and used in moneo.

Configured switching outputs with pre-alarm or main alarm are displayed in moneo with warnings or alarms and are thus visible in the Dashboard.

A new data visualisation tool is available: the pointer. It visually resembles a measuring device with minimum and maximum values and is particularly suited for indicating speed, pressure, flow, current or acceleration. It is now also the default display tool for this type of data.

Question 5

Dashboard - moneo RTM - release notes - version 1.9

Accepted Answer

The dashboard now visualises not only the violations of the static thresholds in yellow (warning) and red (alarm), but also those of the dynamic ones: the ISO thresholds that were set using the AVA wizard, the smart limits of the DataScience Toolbox and the object limits of sensors connected to a VSE.

Question 6

Dashboard - moneo RTM - release notes - version 1.8

Accepted Answer

For each new device there is a default dashboard with all available data sources which can be edited and renamed intuitively and quickly via "Edit dashboard" while the initial dashboard always remains available as default.

Question 7

Dashboard - moneo RTM - release notes - version 1.7

Accepted Answer

Users can add links to easily navigate between dashboards.

Question 8

Analysis - moneo RTM - release notes - version 1.10

Accepted Answer

Further benefits, further information: the digital outputs of an ifm diagnostic electronics for vibration sensors (VSE) can now be detected and used in moneo.

Configured switching outputs with pre-alarm or main alarm are displayed in moneo with warnings or alarms and are thus visible in the Analysis.

Question 9

Tasks and tickets - moneo RTM - release notes - version 1.10

Accepted Answer

Further benefits, further information: the digital outputs of an ifm diagnostic electronics for vibration sensors (VSE) can now be detected and used in moneo.

Configured switching outputs with pre-alarm or main alarm are displayed in moneo with warnings or alarms. What is more, they can even be used in Tasks & Tickets for further information purposes without having to be configured in moneo beforehand (this is because the monitoring already takes place in the diagnostic electronics).

Question 10

Tasks and tickets - moneo RTM - release notes - version 1.8

Accepted Answer

If a ticket created by moneo has been sent to an external system (SAP) and gets lost, e.g. because the connection failed, the administrator can now close or delete the ticket.

Question 11

Settings and rules - moneo RTM - release notes - version 1.9

Accepted Answer

It is possible to define in the ticket processing rules that the alarm or warning tickets caused by object limit violations of VSE data sources will also be sent to external systems (e.g. by mail).

Question 12

Settings and rules - moneo RTM - release notes - version 1.7

Accepted Answer

Tickets created in moneo can now be sent to an external system (SAP) to perform further activities, e.g. create maintenance tasks. Under "Ticket processing rules" you can define which tickets are to be sent.

More information: "moneo shop floor integration in SAP".

Question 13

Device management - moneo OS - release notes - version 1.9

Accepted Answer

Object limits of sensors connected to a VSE are now transferred to moneo. When the VSE and sensors are onboarded, they will be available directly in moneo and then trigger alarms and warnings in the event of threshold violations.

Question 14

Device management - moneo OS - release notes - version 1.8

Accepted Answer

In the device management native units of data sources can be converted live by moneo for display (Presentation unit) and will be shown in the monitoring table, for example.

Question 15

Calculated values - moneo OS - release notes - version 1.10

Accepted Answer

Six new arithmetic function blocks

As of version 1.10, the Calculated values function in moneo now includes six new arithmetic function blocks to generate even more customised information based on the incoming data.

Question 16

Calculated values - moneo OS - release notes - version 1.9

Accepted Answer

In a data flow model, the function blocks in the function library are now sorted alphabetically. This also applies to the categories of the user-defined units and the units themselves.

Question 17

Calculated values - moneo OS - release notes - version 1.8

Accepted Answer

The "Data Flow Modeler" now supports direct control via keyboard, in addition to the mouse. Furthermore helpful tooltips are displayed when the pointer hovers over buttons and icons.

Question 18

Calculated values - moneo OS - release notes - version 1.7

Accepted Answer

In "Calculated values" there is a new function block for a data flow model: "Piece counter". If sensors are connected accordingly, moneo can count trigger signals in a data flow model. For example: switching operations or good and bad parts.

In a data flow model it is possible to define custom units for output values and display them on the "Dashboard" or in the "Monitoring table", for example.

In a data flow model, the run mode "onChange" can be used for high-frequency process values. This means that a new value is immediately taken into account as soon as it changes.

In a data flow model the function block "Counter" offers a new signal connector: "Reset". If the "Reset value" is reached, the "Time counter" or "Piece counter" sets the current value to 0.

If an SMTP server is set up in the "Email channel settings", moneo sends an e-mail to new users when they are created in the "User management". Users receive a notification within moneo if the SMTP server does not work.

Question 19

Connected devices - moneo configure - release notes - version 1.10

Accepted Answer

IO-Link masters with DigitalOut ports now also enable PdOut settings under the Connected devices section in moneo

IO-Link masters with DigitalOut ports now also enable PdOut settings under the Connected devices section in moneo.

List of favourites / view 1 - connected devices in moneo

List of favourites / view 2 - connected devices in moneo

As of now, the list of favourites is available! Devices found via the network search can be added to freely defined lists and then quickly accessed without having to perform another network search.

Connected devices / Dashboard / Better visualisation / Full screen

For better visualisation, the dashboard can now be expanded to full screen size in the connected devices view.

Question 20

Connected devices - moneo configure - release notes - version 1.9

Accepted Answer

The name of the app tile in the moneo home area has been changed from "Configure device" to "Connected devices".

The ifm memory plug saves the configuration of IO-Link devices and is now also supported by moneo. In the parameter view, it is possible to switch between the parameters of the memory plug and those of the connected device.

Question 21

Configure device - moneo configure - release notes - version 1.8

Accepted Answer

With the new add-on, the GSDML file for a PLC can be generated in the GSDML management for connected masters (AL14xx) and IO-Link sensors. The parameter setting of the GSDML file is easily done via the known interface by checkboxes of the parameters that are to be written into the GSDML file.

In addition to dashboards for process data from sensors, they can now also be displayed for IO-Link masters and provide a good overview of the internal temperature and voltage of a master.

Each moneo release includes the latest firmware for IO-Link masters, which can be easily and quickly transferred to the devices.

Question 22

Saved configurations - moneo configure - release notes - version 1.9

Accepted Answer

Now IO-Link masters (devices with an ifm IoT core) can also be configured offline, thus offering time savings because the individual configurations of the sensors no longer need to be saved, but the configuration of the masters including the sensors can be saved without the devices being connected to moneo.

Saved configurations from the LR DEVICE software (in .lrp format) can now be imported into moneo.

Question 23

Device descriptions - moneo configure - release notes - version 1.9

Accepted Answer

The name of the app tile in the moneo home area has been changed from "IODD Management" to "Device descriptions".

Question 24

Data Science Toolbox - release notes - version 1.8

Accepted Answer

In the Smart Limit Watcher, there is a tabular overview per device for location elements or other higher-level nodes in the navigator of how many (active) profiles have been created.

Question 25

AVA raw data - moneo RTM - release notes - version 1.9

Accepted Answer

The list of data recordings has been revised to show even more information and provide a better overview. Now multiple recordings can be deleted at the same time.

Question 26

AVA raw data - moneo RTM - release notes - version 1.8

Accepted Answer

For analysis purposes a rotational speed info can be added in the recording settings of a raw data recording for VVB or VSE devices. In addition to a constant speed as a reference, a speed data source can be added per drag&drop from the navigator.

Question 27

edgeConnect - moneo OS - release notes - version 1.10

Accepted Answer

Cloud connectors - Azure or AWS

With the new cloud connectors, which are included as of moneo version 1.10, it is now possible to send the data available in moneo to the Azure or AWS clouds, thus paving the way for further processing and use of the obtained data or of calculated values.

The Azure IoT Hub or AWS IoT Core can be quickly selected and easily configured via target systems and "Add new target". The required connector needs to be licensed beforehand:

moneo edgeConnect Azure LIC (QMC133)
moneo edgeConnect AWS IoT LIC (QMC132)

For the purpose of cost optimisation, the frequency per seconds of the data to be sent can now also be set between one second and one hour as of moneo version 1.10 onwards, provided a target system (MQTT or cloud service) is connected and the transmission of a data source activated.

Question 28

edgeConnect - moneo OS - release notes - version 1.9

Accepted Answer

This new function provides the necessary connectivity to forward and process data from moneo to third-party systems via MQTT. When the MQTT broker is connected, the data to be sent can be selected in the table under "Data Management".

Question 29

Miscellaneous – release notes - version 1.10

Accepted Answer

As of this version, moneo also supports a light mode in addition to the dark mode

As of this version, moneo supports a light mode in addition to the dark mode. The user can switch between the two modes at any time via the user management.

Question 30

Miscellaneous - release notes - version 1.9

Accepted Answer

In the Me area, the following areas have been renamed/added: moneo version number, open source licences

Now the free moneo trial version is available!
When moneo is installed on a system for the first time, the software can initially be tested free of charge for 30 days in the functional scope "parameter setting" or "condition monitoring including parameter setting":
With the moneo configure SA trial version, devices can be configured quickly and easily.
In addition to parameter setting, the moneo condition monitoring trial version also offers dashboards, data analyses and alarms in the event of threshold violations.
More information at www.moneo-trial.ifm.

Question 31

AMS - moneo appliance - release notes - version 1.10

Accepted Answer

With version 1.10, the moneo appliance and underlying operating system are getting the latest security updates.

Local backups can now also be copied to USB devices.

In the AMS network settings in it is now possible to use DNS alias names. moneo can be addressed in the network via the full qualified domain name (FQDN) of the host, for example.

moneo release notes

What's new in moneo? Click on the function tiles to see the new features of the software release.

Monitoring table

Dashboard

Analysis

Tasks and tickets

Settings and rules

Device management

Calculated values

Connected devices

Saved configurations

Device descriptions

Data Science Toolbox

AVA raw data

AVA wizard

edgeConnect

Miscellaneous

Appliance Management System

More information

moneo: the IIoT platform for industry and production

All moneo use cases at a glance

Try out the IIoT software moneo. Free for 30 days.