You probably do not come from: India. If necessary, change to: United States
  1. Products
  2. Sensors
  3. Speed sensors
  4. Compact speed monitors for hazardous areas
  5. DI506A

Compact evaluation unit for speed monitoring

DI506A

DIA3010-ZPKG/US/3D/5S

Compact evaluation unit for speed monitoring

DI506A

DIA3010-ZPKG/US/3D/5S

  • For applications in hazardous areas
  • Reliable non-contact monitoring of the rotational speed with regard to underspeed
  • 2 in 1: speed sensor and evaluation in one compact housing
  • Easy setting of the switch point via potentiometer
  • For direct connection to a PLC
phase-out article
Alternative articles: DI522A Product comparison: DI506A / DI522A When selecting an alternative article and accessories please note that technical data may differ!
  • ce
  • ex
Product characteristics
Electrical design PNP
Output function normally open
Sensing range [mm] 10; (without impact protection housing: flush mountable; with impact protection housing: non-flush mountable 7 mm)
Dimensions [mm] M30 x 1.5 / L = 82
Application
Application simple evaluation of rotating and linear movement with regard to underspeed; blocking
Electrical data
Nominal voltage DC [V] 10...36
Current consumption [mA] < 15
Protection class III
Reverse polarity protection yes
Outputs
Total number of outputs 1
Electrical design PNP
Output function normally open
Max. voltage drop switching output DC [V] 2.5
Permanent current rating of switching output DC [mA] 250
Short-time current rating of switching output [mA] 250
Switching frequency DC [Hz] 100
Short-circuit proof yes
Overload protection yes
Detection zone
Sensing range [mm] 10; (without impact protection housing: flush mountable; with impact protection housing: non-flush mountable 7 mm)
Sensing range adjustable no
Real sensing range Sr [mm] 10 ± 10 %; (without impact protection housing flush mountable)
Operating distance [mm] 0...5; (with impact protection housing non-flush mountable)
Measuring/setting range
Setting range [Imp/min] 5...300
Accuracy / deviations
Correction factor steel: 1 / stainless steel: 0.7 / brass: 0.5 / aluminium: 0.4 / copper: 0.3
Hysteresis [% of Sr] 10
Response times
Start-up delay [s] 5; (typical)
Max. damping frequency [Imp/min] 15000
Software / programming
Adjustment of the switch point multiturn potentiometer
Operating conditions
Ambient temperature [°C] -20...50
Protection IP 67
Tests / approvals
ATEX marking II 3D Ex tc IIIC T80°C Dc IP67 U
Note on ATEX marking
only in conjunction with the impact protection housing
EMC
EN 60947-5-2
MTTF [years] 918
Mechanical data
Weight [g] 302
Mounting flush mountable
Dimensions [mm] M30 x 1.5 / L = 82
Thread designation M30 x 1.5
Materials brass special coating; PBT; PPE; TPE-U; PA 6.6
Displays / operating elements
Display
switching status 1 x LED, green
input signal 1 x LED, yellow
Accessories
Items supplied
lock nuts: 2
Impact protection housing
Mounting clamp
bemerkungen
Electrical connection - plug
Connection Connector: 1 x M12; coding: A