You probably do not come from: United Kingdom. If necessary, change to: United States
Service hotline 0208 213 2222
  1. Capacitive sensors by application
  2. Plastics industry

Plastics industry

Sensor housing Housing Electrical Design Sensing range Output function Points to consider

KG53
M18 • DC PNP
• DC NPN
• 0.5...9 mm
quasi flush
• 0.5...30 mm
non-flush
• normally open
• normally closed
  • Easily adjustable sensing range
  • High protection rating for the requirements of harsh industrial environments
  • Use in high medium temperatures
  • For position detection or level monitoring

KG6
M18 • DC PNP
• DC NPN
• 0.5...9 mm
quasi flush
• 0.5...30 mm
non-flush
• Selectable
  • Easily adjustable sensing range
  • With signal display for a perfect switch point
  • High protection rating for the requirements of harsh industrial environments
  • Use in high medium temperatures
  • For position detection or level monitoring

KI53
M30 • DC PNP
• DC NPN
• 0.5...24 mm
quasi flush
• 0.5...40 mm
non-flush
• normally open
• normally closed
  • Easily adjustable sensing range
  • High protection rating for the requirements of harsh industrial environments
  • Use in high medium temperatures
  • For position detection or level monitoring

KI6
M30 • DC PNP
• DC NPN
 • 0.5...24 mm
quasi flush
• 0.5...40 mm
non-flush
• Selectable
  • Easily adjustable sensing range
  • With signal display for a perfect switch point
  • High protection rating for the requirements of harsh industrial environments
  • Use in high medium temperatures
  • For position detection or level monitoring

KN
M30 • DC PNP • Programmable • Pushbutton
  • For use in plastics machines and crystallizers
  • Level detection of granulates up to 250 °C
  • LED display to check operation, switching status and function
  • Resistant to electrostatic discharge

KQ10
250 x 28 x 16.7 mm • DC PNP
• DC NPN
Level measuring range 200 mm • Programmable
  • Continuously measuring level from outside
  • No stress caused by the medium thanks to non-contact detection
  • Three point level sensors in one unit
  • Deposits can be detected and signalled to improve quality of the process
  • Linking several KQ10 via IO-Link