Search
GB
  • Products
  • Industries
  • IIoT & Solutions
  • Service
  • Company
  1. Products
  2. Sensors
  3. Encoders
  4. Absolute singleturn encoders
  5. RN6065
 
 
 
absolute singleturn double shaft encoder RN6065
absolute singleturn double shaft encoder RN6065
absolute singleturn double shaft encoder RN6065
absolute singleturn double shaft encoder RN6065
absolute singleturn double shaft encoder RN6065
absolute singleturn double shaft encoder RN6065
  • ce
Product characteristics
Resolution 8192 revolutions; 13 bit
Communication interface SSI data interface
Shaft design solid shaft
Shaft diameter [mm] 10
Application
Function principle absolute
Revolution type singleturn
Electrical data
Operating voltage [V] 10...30 DC
Current consumption [mA] < 100
Inputs
Inputs reversal of direction of rotation; reset to zero
Outputs
Code Gray code; (increasing code values when turned clockwise (seen on the shaft))
Code signal Clock input; TTL-compatible signals; clock and clock (inv.) from drivers to RS 422; data output; synchronous serial; TTL-compatible signals, data, and data (inv.)
Measuring/setting range
Resolution 8192 revolutions; 13 bit
Interfaces
Communication interface SSI data interface
Operating conditions
Ambient temperature [°C] -40...100
Max. relative air humidity [%] 98
Protection IP 67
Tests / approvals
EMC
EN IEC 61000-6-4 radiation of interference / industrial environments
EN IEC 61000-6-2 immunity / industrial environments
Shock resistance
EN 60068-2-27 < 50 g 6 ms
Vibration resistance
EN 60068-2-6 < 10 g / 55...2000 Hz
MTTF [years] 289
Mechanical data
Weight [g] 1342.7
Dimensions [mm] Ø 89 / L = 116
Materials flange: aluminium anodised; housing: aluminium anodised
Max. revolution, mechanical [U/min] 6000
Max. starting torque [Nm] 4
Reference temperature torque [°C] 25
Shaft design solid shaft
Shaft diameter [mm] 10
Shaft material
stainless steel (303/1.4305)
Max. shaft load axial (at the shaft end) [N] 40
Max. shaft load radial (at the shaft end) [N] 110
Fixing flange Ø 89 mm
Remarks
Remarks
Wires/pins not connected (n.c.) must not be used.
Electrical connection - SSI 1
Connection Cable: 0.15 m, PUR
Connection Connector: 1 x M12; coding: A
Electrical connection - SSI 2
Cable: 0.15 m, PUR
Connector: 1 x M12; coding: A
Diagrams and graphs
1 clock
2 data
t1 ≤ 0.5 µs clock: 1 MHz
t2 < 0.4 µs
t3 = 13...20 µs
T = 1...10 µs
13 Bit without parity bit
Other data
ifm electronic gmbh • Friedrichstraße 1 • 45128 Essen — We reserve the right to make technical alterations without prior notice. — EN-GB — RN6065-00 — 27.07.2020 —