1. Homepage
  2. Products
  3. Industrial communication
  4. AS-Interface I/O modules
  5. Field modules with quick mounting technology ClassicLine
  6. AC5230

AC5230

AS-Interface ClassicLine module with quick mounting technology

ClassicLine 1AI C 1AO C 2DI

{{'OPTIONAL_INFO' | productAvailability | error}}

Dear customer,
Unfortunately, this data sheet is not available in the requested language. If you have any further questions, you can contact us by e-mail.

Best regards
Your ifm team

  • Easy toolless installation and wiring thanks to quick mounting technology
  • Three freely selectable directions of the flat cable
  • Clearly visible powerful LEDs for displaying operation, switching status and error
  • High protection rating for the requirements of harsh industrial environments
  • Robust M12 connectors for connecting sensors and actuators
  • ce
  • eac
  • cul
Download
Technische Details
Product characteristics
Number of inputs and outputs Number of digital inputs: 2; Number of analogue inputs: 1; Number of analogue outputs: 1
Application
Application only for operation with AS-i masters with the profile M4
Electrical data
Operating voltage [V] 26.5...31.6 DC; ("supply class 2" to cULus)
Max. current consumption from AS-i [mA] 250
Reverse polarity protection yes
Max. current load total [A] 0.2
Inputs / outputs
Number of inputs and outputs Number of digital inputs: 2; Number of analogue inputs: 1; Number of analogue outputs: 1
Inputs
Number of digital inputs 2
Number of analogue inputs 1
Input circuit of digital inputs PNP
Sensor supply of the inputs AS-i
Voltage supply [V] 18...30
Analogue input (current) [mA] 4...20
Max. voltage drop across load for nominal voltage [V] 10
Analogue inputs protected against short circuits yes
Resolution of analogue input 12 bit
Outputs
Number of analogue outputs 1
Analogue current output [mA] 4...20
Max. voltage drop across load for nominal current [V] 10
Resolution of analogue output 12 bit
Actuator supply analogue outputs AS-i
Accuracy / deviations
Measuring error [% of the final value] 0,5
Operating conditions
Ambient temperature [°C] -25...70
Protection IP 67
Tests / approvals
EMC
EN 50295
IEC 61000-6-2
MTTF [years] 137
AS-i classification
AS-i version 3.0
Extended addressing mode possible no
AS-i profile S-7.5.5
AS-i I/O configuration [hex] 7
AS-i ID code [hex] 5.5
Assignment of the parameter bits
parameter bit function
P0 watchdog analogue output : 1 activated * / 0 deactivated
P1 peripheral fault indication analogue input : 1 activated * / 0 deactivated
P2 peripheral fault indication analogue output : 1 activated * / 0 deactivated
P3 not used : 1 default value
Mechanical data
Weight [g] 198
Materials PA; piercing contacts: CuSn6 nickel-plated and tin-plated
Displays / operating elements
Display
operation LED, green
errors LED, red
function LED, yellow
Accessories
Accessories (supplied)
lower part
Accessories (optional)
Protective cap: M12, E73004
Remarks
Remarks
3-wire connection possible via external link.
The actuator supply on pins 1 and 3 can be used to supply the sensors / actuators.
In this case, an electrical isolation to AS-i is not given.
The analogue inputs and outputs (pins 2 and 4) are electrically separated and have no connection to AS-i.
Do not connect any of the following points to an external potential:
I-1/2, I-2, Pin 1, Pin 3
Pack quantity 1 pcs.
Electrical connection
; Maximum cable length: 30 m
Electrical connection - analogue
Connector: M12; Maximum cable length: 30 m
Electrical connection - digital
Connection Connector: M12; Maximum cable length: 30 m
ifm electronic gmbh • Friedrichstraße 1 • 45128 Essen — We reserve the right to make technical alterations without prior notice. — EN-GB — AC5230-01 — 12.04.2012 —