You probably do not come from: United Kingdom.  If necessary, change to: United States
  1. Homepage
  2. Products
  3. AC2501

AS-Interface ClassicLine module

AC2501

ClassicLine45 4DI FKT M12

AS-Interface ClassicLine module

AC2501

ClassicLine45 4DI FKT M12

Article no longer available - archive entry

  • ce
  • asib
Technical details
Electrical data
Operating voltage [V] 26.5...31.6 DC
Max. current consumption from AS-i [mA] 250
Inputs / outputs
Number of inputs and outputs Number of digital inputs: 4
Inputs
Number of digital inputs 4
Input circuit of digital inputs PNP
Sensor supply of the inputs AS-i
Voltage supply [V] 18...30; (via flat cable)
Max. total current rating of inputs [mA] 200
Input current High [mA] 6...10
Input current Low [mA] 0...2
Min. switching level high signal [V] 11
Digital inputs protected against short circuits yes
Outputs
Electrical design AS-i
Operating conditions
Ambient temperature [°C] -25...50
Note on ambient temperature
current for sensor supply: < 200 mA
-25...70 °C: < 150 mA
Protection IP 67
Tests / approvals
EMC
EN 50295
MTTF [years] 296
AS-i classification
AS-i version 2.1
AS-i addressing IR addressing possible
Extended addressing mode no
AS-i profile S-0.F.E
AS-i I/O configuration [hex] 0
AS-i ID code [hex] F.E
AS-i certificate pending yes
Assignment of the parameter bits
parameter bit Designation
P0 selection High active / Low active / pin 2 / socket I-1 / FKT 1
P1 selection High active / Low active / pin 2 / socket I-2 / FKT 2
P2 selection High active / Low active / pin 2 / socket I-3 / FKT 3
P3 selection High active / Low active / pin 2 / socket I-4 / FKT 4
Mechanical data
Weight [g] 107.7
Type of mounting AS-i interface to FC lower parts
Materials PBT
Displays / operating elements
Display
operation LED, green
errors LED, red
function LED, yellow
Accessories
Accessories (optional)
Module lower part
Remarks
Remarks
Do not connect any of the following points to an external potential:
I-, I+, I1...I4, FKT1...FKT4
The connections are electrically connected with the AS-i cable.
In case of a fault the high or low activity (NO or NC principle) of the function check inputs can be set separately.
In case of a fault the red LED of the corresponding input lights and in addition LED 2 (FAULT) flashes.
Pack quantity 1 pcs.
Electrical connection
contact pins to module lower part, FK / PG:
Connector: M12
ifm electronic gmbh • Friedrichstraße 1 • 45128 Essen — We reserve the right to make technical alterations without prior notice. — EN-GB — AC2501-00 — 04.09.2013 —