The AS-i Airbox combines electronics and pneumatics in one housing.
Easy installation in 4 steps:
Saving costs does not only mean reducing installation and set-up costs, but also avoiding unnecessary leaks. This is where the AirBox helps by means of decentralisation:The valve is in the immediate vicinity of the actuator.
Additional advantages:
Conventional wiring of E-STOP devices is very complex.
Cables must be cut to length and laid. In the terminal chamber of the E-STOP, they must be stripped and fitted with wire end sleeves before they can be connected to the contact points.
As-i reduces cabling and assembly costs to a bare minimum. Using an M12 connection cable, the E-STOP is simply connected to a cable insulation displacement connector, which ensures a quick and secure connection thanks to the piercing method.
Easy wiring for data and energy
No configuration required.
Conventional wiring
Control and feedback via AS-Interface