| Product characteristics |
| Number of inputs and outputs |
Number of digital outputs: 1; Number of analogue outputs: 1 |
| Measuring range |
| -25...160 °C |
-13...320 °F |
|
| Process connection |
Aseptoflex |
| Installation length EL [mm] |
40 |
| Application |
| Special feature |
Gold-plated contacts |
| Measuring element |
1 x Pt 1000 + 1 x NTC; (thermically coupled, with backup function (temperature measuring even if one element fails)) |
| Media |
liquids and gases |
| Pressure rating [bar] |
50 |
| Minimum installation depth [mm] |
15 |
| No dead space |
yes |
| Electrical data |
| Operating voltage [V] |
20...32 DC; (according to EN 50178 SELV/PELV) |
| Current consumption [mA] |
23; (24 V) |
| Protection class |
III |
| Reverse polarity protection |
yes |
| Power-on delay time [s] |
4 |
| Integrated watchdog |
yes |
| Inputs / outputs |
| Number of inputs and outputs |
Number of digital outputs: 1; Number of analogue outputs: 1 |
| Outputs |
| Total number of outputs |
2 |
| Output signal |
switching signal; analogue signal; (configurable) |
| Electrical design |
PNP/NPN |
| Number of digital outputs |
1 |
| Output function |
normally open / normally closed / diagnostic signal; (parameterisable) |
| Max. voltage drop switching output DC [V] |
2 |
| Permanent current rating of switching output DC [mA] |
250 |
| Diagnostic output |
diagnostic output for drift and fault monitoring |
| Number of analogue outputs |
1 |
| Analogue current output [mA] |
4...20 |
| Max. load [Ω] |
(Ub - 10 V) x 50 |
| Short-circuit protection |
yes |
| Type of short-circuit protection |
pulsed |
| Overload protection |
yes |
| Measuring/setting range |
| Probe length L [mm] |
40 |
| Measuring range |
| -25...160 °C |
-13...320 °F |
|
| Drift warning |
|
| Drift alarm |
|
| In steps of |
|
| Resolution |
| Resolution of analogue output [K] |
0.05 |
| Accuracy / deviations |
| Precision analogue output [K] |
± 0,2 (-10...100°C); ± 0,3 (-25...-10/100...150°C); (probe completely inserted into the measured medium up to the sealing chamfer) |
| Drift monitoring [K] |
± 0,2 (-10...100°C); ± 0,3 (-25...-10/100...150°C) *); (probe completely inserted into the measured medium up to the sealing chamfer) |
| Temperature coefficient [% of the span / 10 K] |
< ± 0,01; (in case of deviation from the reference condition 25 ± 5 °C) |
| Response times |
| Dynamic response T05 / T09 [s] |
6 / 13 |
| Software / programming |
| Parameter setting options |
drift warning/drift alarm threshold; Fail-Safe; Display unit; scaling of the analogue output; redundancy switching; performance diagnostic output; switching logic; normally open / normally closed; programmable via EPS interface |
| Operating conditions |
| Ambient temperature [°C] |
-25...70 |
| Note on ambient temperature |
| electronics: -25...70 °C |
| Process connection: -32...170 °C |
|
| Storage temperature [°C] |
-40...85 |
| Protection |
IP 67; IP 69K |
| Tests / approvals |
| EMC |
| DIN EN 61000-4-2 ESD |
4 kV CD / 8 kV AD |
| EN 61000-4-3 HF radiated |
10 V/m |
| DIN EN 61000-4-4 Burst |
2 kV |
| EN 61000-4-6 HF conducted |
10 V |
|
| Shock resistance |
| DIN IEC 68-2-27 |
50 g (11 ms) |
|
| Vibration resistance |
| DIN EN 60068-2-6 |
20 g (10...2000 Hz) |
|
| MTTF [years] |
220 |
| Note on approval |
| Including free 5-point calibration certificate. |
|
| Mechanical data |
| Weight [g] |
0.456 |
| Materials |
stainless steel (1.4404 / 316L); PEI; FKM |
| Materials (wetted parts) |
stainless steel (1.4404 / 316L) |
| Process connection |
Aseptoflex |
| Surface characteristics Ra/Rz of the wetted parts |
Ra: < 0.6 |
| Installation length EL [mm] |
40 |
| Remarks |
| Remarks |
| referring to UL: for use on a low voltage circuit with overcurrent protection |
| in accordance with UL873 tab. 28.1 or Imax = 100/Ub (Ub = voltage of the circuit) |
| The 3-A qualification is only valid if adapters with 3-A qualification are used for installation. |
|
| Pack quantity |
1 pcs. |
| Electrical connection |
| Connection |
Connector: 1 x M12; Contacts: gold-plated |
