Q: Device management – cloud version 1.14

Take advantage of the new features: Scan: find available devices within range of your base station. Register: quickly and easily connect wireless devices. Unregister: effortlessly disconnect already connected devices. You can also optimise your data transfer and aggregation according to your needs in device management. Determine the transmission interval and the amount of data transmitted to the cloud. Choose whether you want to receive average or maximum values – for less traffic and easier evaluation. This enables you to identify any changes to the values at a glance. Our IIoT core device now also supports wireless devices such as Bluetooth Mesh, which can be easily integrated via device management. The new network view means you can keep an eye on everything! You can now display the physical topology more clearly. The tree-like structure of this view enables you to see at any time the level a particular device is on.

Q: Device management – moneo OS – Release notes for software version 1.15

Use the new functions: Scan: Find available devices within range of your base station. Register: Connect wireless devices quickly and easily. Unregister: Easily disconnect already connected devices. Our IIoT Core device now also supports wireless devices such as Bluetooth Mesh, which can be easily integrated using the device management. In addition to the existing UI and e-mail notifications, you can now send messages through other channels as well: text messages (via GatewayAPI), MS Teams, Slack and Discord. Everything at a glance with the new network view! You now have a much clearer view of the physical topology. The tree-like structure of this view makes it easy to see at which level a particular device is located.

Q: Calculated values – moneo OS – release notes for software version 1.10

As of version 1.10, the Calculated values function in moneo now includes six new arithmetic function blocks to generate even more customised information based on the incoming data.

Q: Saved Configurations – moneo configure – Cloud Version 05/2025

No Data Loss After Changing IP Address The Agent Connector and the ifm Device (IoT Core) Connector now offer the ability to adjust connector settings such as IP and port on the "Device Details and Data Streams" page for already onboarded devices. If the user wants to adjust the IP address of a master device later, no data will be lost due to off- and onboarding.

Question 1

Simple parameterisation: New template for masters in the AL159x series

Accepted Answer

There is a customised display for the AL159x series master to make it easier to make the settings. This template simplifies the configuration of the master.

Question 2

Device management – cloud version 1.14

Accepted Answer

Take advantage of the new features:

Scan: find available devices within range of your base station.
Register: quickly and easily connect wireless devices.
Unregister: effortlessly disconnect already connected devices.

You can also optimise your data transfer and aggregation according to your needs in device management. Determine the transmission interval and the amount of data transmitted to the cloud. Choose whether you want to receive average or maximum values – for less traffic and easier evaluation. This enables you to identify any changes to the values at a glance.

Our IIoT core device now also supports wireless devices such as Bluetooth Mesh, which can be easily integrated via device management.

The new network view means you can keep an eye on everything! You can now display the physical topology more clearly. The tree-like structure of this view enables you to see at any time the level a particular device is on.

Question 3

Simple parameterisation: New template for masters in the AL159x series (v1.18)

Accepted Answer

There is a customised display for the AL159x series master to make it easier to make the settings. This template simplifies the configuration of the master.

Question 4

Device management – moneo OS – Release notes for software version 1.15

Accepted Answer

Use the new functions:

Scan: Find available devices within range of your base station.
Register: Connect wireless devices quickly and easily.
Unregister: Easily disconnect already connected devices.

Our IIoT Core device now also supports wireless devices such as Bluetooth Mesh, which can be easily integrated using the device management.

In addition to the existing UI and e-mail notifications, you can now send messages through other channels as well: text messages (via GatewayAPI), MS Teams, Slack and Discord.

Everything at a glance with the new network view! You now have a much clearer view of the physical topology. The tree-like structure of this view makes it easy to see at which level a particular device is located.

Question 5

Device management – moneo OS – Release notes for software version 1.13

Accepted Answer

Now you can keep an even better overview of your infopoints! From now on, your topology tree shows you how many infopoints you are using in each area.

Question 6

Device management – moneo OS – release notes for software version 1.12

Accepted Answer

Simple device identification – In the device management, devices can now be connected using their host name instead of their IP address. This makes it much easier to identify devices on networks with dynamic IP addresses.

User access can be restricted to a part of the topology tree (e.g. a plant, a production line or a specific machine). Administrators can now easily define the visibility and thus the access to location elements and sibling nodes for user groups via drag & drop in the Navigator.

This means, for example, that all kinds of maintenance tasks can only be made available to the user groups responsible for them.

Such an authorisation concept also ensures that users only receive notifications (warnings and alarms) that are within their area of responsibility.

The names of the devices in the navigator now follow the logic that if a user-defined name is assigned, it is used in the navigator. If the user-defined name is not assigned, the configured name is displayed. If this is also not assigned, the ifm product name appears.

If the user-defined name is edited in the device management, it is also adapted in the navigator.

Question 7

Device management – moneo OS – release notes for software version 1.11

Accepted Answer

From now on, updates for subsequent expansion of data sources without data loss is possible via a coupled agent connector.

Question 8

Calculated values – moneo OS – release notes for software version 1.11

Accepted Answer

In a data flow model, the function block for publishing the calculated value has a new Boolean input: It can be used to define a condition according to which the calculated value will only be published if the condition is true. In this way, the calculated values can be related to the machine status, for example.

Question 9

Calculated values – moneo OS – release notes for software version 1.10

Accepted Answer

Six new arithmetic function blocks

As of version 1.10, the Calculated values function in moneo now includes six new arithmetic function blocks to generate even more customised information based on the incoming data.

Question 10

Saved Configurations – moneo configure – Cloud Version 05/2025

Accepted Answer

No Data Loss After Changing IP Address

The Agent Connector and the ifm Device (IoT Core) Connector now offer the ability to adjust connector settings such as IP and port on the "Device Details and Data Streams" page for already onboarded devices.

If the user wants to adjust the IP address of a master device later, no data will be lost due to off- and onboarding.

Question 11

Saved Configurations – moneo configure – release notes for software version 1.17

Accepted Answer

No Data Loss After Changing IP Address

The Agent Connector and the ifm Device (IoT Core) Connector now offer the ability to adjust connector settings such as IP and port on the "Device Details and Data Streams" page for already onboarded devices.

If the user wants to adjust the IP address of a master device later, no data will be lost due to off- and onboarding.

Question 12

Saved configurations – moneo configure – release notes for software version 1.13

Accepted Answer

Configure the parameters of several machines with a single click? Now you can! You can now save, import and export the parameter set of an IO-Link master, including its connected devices. This will save you a huge amount of time.

Question 13

Saved configurations – moneo configure – release notes for software version 1.12

Accepted Answer

The option to save all configurations of the IO-Link master and the connected sensors in one file saves a great deal of time. When exporting saved configurations of the ifm masters, the saved configurations of all connected sensors are now also saved in the .lrp file.

Question 14

Saved configurations – moneo configure – release notes for software version 1.11

Accepted Answer

It is now possible to import several saved configurations from the LR DEVICE software (.lrp) in a zip file.

Question 15

New openness: moneo now speaks generic MQTT

Accepted Answer

Plain MQTT Connector: moneo is expanding its connectivity with a generic MQTT interface. This means that customers who use non-ifm devices can now also connect their MQTT-capable systems directly to moneo. moneo can now bring in data from IT systems and output it again - regardless of the device manufacturer.

For seamless integration, the connected systems must follow the specific topic structure and JSON semantics of moneo. This ensures standardised data processing and enables moneo to fully integrate devices from other manufacturers into the existing ecosystem. This allows customers to expand their device base with minimal effort without having to forego the familiar moneo functionalities.

Question 16

Directly connected: moneo now speaks Simatic S7

Accepted Answer

Simatic S7 Connector: With this connector, it is possible to connect data directly from a Siemens controller. The onboarding dialogue contains predefined standard settings for immediate use. However, user-defined entries are also possible. Note: The S7 data types differ from the moneo data types. It is therefore important that you enter the correct data type in the "Types" field.

Question 17

edgeConnect – moneo OS – Cloud Version 05/2025

Accepted Answer

IoT Core Connector

The IoT Core Connector now supports encrypted communication. In moneo, you can choose whether the connection to the target system should be established via HTTPS. You can add master devices and enter a username and password via a user interface.

This provides you with a secure and user-friendly way to manage IoT devices. Encrypted communication protects the data, while the simple configuration of master devices makes the process more efficient and secure.

Further details and important information can be found in the moneo Device Management help.

Webhook

A new endpoint allows the transmission of ticket data from moneo via webhook. This data can then be processed and used in a third-party system.

There are numerous options for exporting data. In addition to webhook transmission, data can be forwarded to cloud services such as Azure or AWS, as well as to third-party systems via MQTT or OPC UA. Data can also be retrieved via the Public API.

Question 18

edgeConnect – cloud version 1.14

Accepted Answer

There are also updates to our edgeConnect! You now have expanded options for viewing and evaluating your data sources. Activate minimum, maximum and average values to make your data analysis even more precise. For more information, please refer to the moneo edgeConnect documentation.

Question 19

New openness: moneo now speaks generic MQTT (v1.18)

Accepted Answer

Plain MQTT Connector: moneo is expanding its connectivity with a generic MQTT interface. This means that customers who use non-ifm devices can now also connect their MQTT-capable systems directly to moneo. moneo can now bring in data from IT systems and output it again - regardless of the device manufacturer.

For seamless integration, the connected systems must follow the specific topic structure and JSON semantics of moneo. This ensures standardised data processing and enables moneo to fully integrate devices from other manufacturers into the existing ecosystem. This allows customers to expand their device base with minimal effort without having to forego the familiar moneo functionalities.

Question 20

Directly connected: moneo now speaks Simatic S7 (v1.18)

Accepted Answer

Simatic S7 Connector: With this connector, it is possible to connect data directly from a Siemens controller. The onboarding dialogue contains predefined standard settings for immediate use. However, user-defined entries are also possible. Note: The S7 data types differ from the moneo data types. It is therefore important that you enter the correct data type in the "Types" field.

Question 21

edgeConnect – moneo OS – release notes for software version 1.17

Accepted Answer

Access to moneo data using Public API

You can easily access the moneo database and trigger interactions. Data and tickets can be quickly and specifically retrieved via request, enabling efficient information gathering. The valuable process data and added value generated by moneo can be used in your preferred IT systems. Authentication ensures the security of your data. (Instructions can be found in the downloads).

Example: Track & Trace generates a ticket in moneo. The ticket can now be retrieved via HTTPS request. This allows the user to analyze and use the ticket in a third system (e.g., a maintenance system where work orders can be generated from the ticket information).

IoT Core Connector

The IoT Core Connector now supports encrypted communication. In moneo, you can choose whether the connection to the target system should be established via HTTPS. You can add master devices and enter a username and password via a user interface.

This provides you with a secure and user-friendly way to manage IoT devices. Encrypted communication protects the data, while the simple configuration of master devices makes the process more efficient and secure.

Further details and important information can be found in the moneo Device Management help.

Webhook

A new endpoint allows the transmission of ticket data from moneo via webhook. This data can then be processed and used in a third-party system.

There are numerous options for exporting data. In addition to webhook transmission, data can be forwarded to cloud services such as Azure or AWS, as well as to third-party systems via MQTT or OPC UA. Data can also be retrieved via the Public API.

Question 22

edgeConnect – moneo OS – release notes for software version 1.13

Accepted Answer

The formats of sent messages can be modified even easier.
Getting insight into the origin of your sensor data is now easier.

You now have even more flexibility when connecting to existing systems and platforms such as MQTT Broker, AWS IoT Core and Azure IoT Hub.

Question 23

edgeConnect – moneo OS – release notes for software version 1.12

Accepted Answer

With the new connector licence (QMC136) for an OPC UA server in moneo, it is possible in a simple and standardised way to provide process data that can be retrieved by external OPC UA clients. The data (including calculated values) is available for further use and processing, for example in planning systems for maintenance purposes.
The required data is simply activated for provision in the data management.

QMC136

Plug-and-play connection: a new connector enables communication with devices with ifm IoTCore interface. ifm IoTCore is a communication protocol that is being increasingly implemented in ifm devices. moneo, for example, enables use cases with wireless vibration sensors in conjunction with this new connector licence and compatible devices. The first ifm IoTCore implementation in an ifm device is the gateway (ZB0929) for data acquisition from wireless VWV vibration sensors.

QMC005

For further information: Smart vibration monitoring without cabling.

Question 24

edgeConnect – moneo OS – release notes for software version 1.11

Accepted Answer

The current process data, complete with indication of unit and info about the last update, are now also displayed for each connected data source in the Data Management.

Using the AWS, Azure and MQTT connectors, the contents of warning and alarm tickets can now also be sent in JSON format to external target systems.

Question 25

edgeConnect – moneo OS – release notes for software version 1.10

Accepted Answer

Cloud connectors – Azure or AWS

The new cloud connectors, which are included as of moneo version 1.10, enable you to send the data available in moneo to the Azure or AWS clouds, thus paving the way for further processing and use of the obtained data or of calculated values.

The Azure IoT Hub or AWS IoT Core can be quickly selected and easily configured via target systems and “Add new target”. The required connector needs to be licensed beforehand:

For the purpose of cost optimisation, the frequency per seconds of the data to be sent can now also be set between one second and one hour as of moneo version 1.10 onwards, provided a target system (MQTT or cloud service) is connected and the transmission of a data source activated.

Question 26

remoteConnect – cloud version 1.14

Accepted Answer

Fix problems, change settings or make an update – all remotely, regardless of location? The new remoteConnect tool for remote access to your application now makes this possible! Thanks to a secure end-to-end connection, it enables remote access to devices and system components such as your edgeGateways, IO-Link masters, ifm VSE, controllers, etc. via the existing network infrastructure.

Service technicians can perform maintenance without an on-site visit. This saves you time and money while improving your ecological footprint. This tool is part of the moneo IIoT Core Cloud licence and is not included in the on-premises version.

Question 27

Monitoring table – cloud version 1.14

Accepted Answer

You can now also display your process values even more precisely: select the number of decimal places and the desired display accuracy.

Question 28

Monitoring table – moneo RTM – Release notes for software version 1.15

Accepted Answer

Your process values can now be displayed even more accurately: simply choose the number of decimal places and the desired accuracy of the display.

Question 29

Monitoring table – moneo RTM – release information for software version 1.10

Accepted Answer

Further benefits, further information: the digital outputs of an ifm diagnostic electronics for vibration sensors (VSE) can now be detected and used in moneo.

Configured switching outputs with pre-alarm or main alarm are displayed in moneo with warnings or alarms and are thus visible in the Monitoring table.

Question 30

Dashboard – cloud version 1.14

Accepted Answer

Create custom dashboards in seconds! Our solution enables you to easily generate and save dashboard templates from existing dashboards. We also enable you to export and import dashboard templates directly from your hard drive. This means you can have your customised dashboards at your fingertips at all times – for maximum efficiency and flexibility.

Question 31

Dashboard – moneo RTM – Release notes for software version 1.15

Accepted Answer

Create custom dashboards in seconds! Our solution allows you to build and save dashboard templates from existing dashboards without any difficulty. What is more, you can also export and import dashboard templates directly from your hard drive. Brand new: you can now position your dashboard widgets so that they overlap each other. This means your customised dashboards are always at your fingertips - for maximum efficiency and flexibility.

Question 32

Dashboard – moneo RTM – release notes for software version 1.12

Accepted Answer

Clear dashboard design: the display of data on dashboards can now be set to be semi-transparent, making the graphics and images behind them more visible and the entire dashboard easier to read. To do this, select "Enable transparent background" in “Edit instrument” in edit mode.

Question 33

Dashboard – moneo RTM – release notes for software version 1.11

Accepted Answer

The link icons of linked dashboards now directly visualise violations of limits on underlying dashboards: yellow = warnings, red = alarms. This way, several dashboards in large system structures can be monitored at a single glance.

Question 34

Dashboard – moneo RTM – release notes for software version 1.10

Accepted Answer

Further benefits, further information: the digital outputs of an ifm diagnostic electronics for vibration sensors (VSE) can now be detected and used in moneo.

Configured switching outputs with pre-alarm or main alarm are displayed in moneo with warnings or alarms and are thus visible on the Dashboard.

A new data visualisation tool is available: the pointer. It visually resembles a measuring device with minimum and maximum values and is particularly suited for indicating speed, pressure, flow, current or acceleration. It is now also the default display tool for this type of data.

Question 35

Analysis – moneo RTM – release information for software version 1.13

Accepted Answer

Thanks to manual scaling of the y-axis, you can now achieve improved in-depth analysis! Examine data sources in detail and zoom into your process values to gain extra-precise insights.

Did you conduct analysis some time ago? Now you can easily find all previous analyses again using the tabular view of all saved analyses.
You can always keep an eye on the most important analyses as these can be linked from the home screen.

Question 36

Analysis – moneo RTM – release information for software version 1.10

Accepted Answer

Further benefits, further information: the digital outputs of an ifm diagnostic electronics for vibration sensors (VSE) can now be detected and used in moneo.

Configured switching outputs with pre-alarm or main alarm are displayed in moneo with warnings or alarms and are thus visible in Analysis.

Question 37

Tasks and tickets – moneo RTM – release information for software version 1.10

Accepted Answer

Further benefits, further information: the digital outputs of an ifm diagnostic electronics for vibration sensors (VSE) can now be detected and used in moneo.

Configured switching outputs with pre-alarm or main alarm are displayed in moneo with warnings or alarms and they can even be used in Tasks & Tickets for further information purposes without having to be configured in moneo beforehand (this is because the monitoring already takes place in the diagnostic electronics).

Question 38

Raw data recording – moneo RTM – release notes for software version 1.12

Accepted Answer

Tickets generated by calculated values and limit violations of SmartLimits can also be used as triggers for raw data recording.

Tickets generated by the PatternMonitor can also be used as triggers for raw data recording.

Question 39

Layout – Track & Trace – Cloud Version 05/2025

Accepted Answer

Increased Transparency & Improved Visualization

Optimized Readability: Timestamps on the x-axis are rotated to improve visibility.
Continuous Data Display: Day breaks have been removed to ensure seamless representation.
Efficient Item Search: The order of start and end times is considered to facilitate item searches.

Initialization of Elements

Data sources enable the automatic generation of additional attributes for items. This feature ensures smooth and automated data integration, significantly simplifying and accelerating your business processes.

Example: A carton with semi-finished goods and an RFID tag on the outside has been identified. The associated production order number can now be automatically linked in the database. This means that business data, such as a production order number, can be linked in moneo using data sources like a handheld code scanner or a connection to a PLC.

Data Export of Item History

The physical movements and process data of items can be exported to a JSON file. Use your preferred IT tools, such as MS Power BI, for further research and analysis.

By providing easy access to detailed data, you can make informed decisions more quickly. This feature allows you to efficiently export data and work with powerful analysis tools, significantly improving business processes.

Question 40

Layout – Track & Trace – release notes for software version 1.17

Accepted Answer

Increased Transparency & Improved Visualization

Optimized Readability: Timestamps on the x-axis are rotated to improve visibility.
Continuous Data Display: Day breaks have been removed to ensure seamless representation.
Efficient Item Search: The order of start and end times is considered to facilitate item searches.

Initialization of Elements

Data sources enable the automatic generation of additional attributes for items. This feature ensures smooth and automated data integration, significantly simplifying and accelerating your business processes.

Example: A carton with semi-finished goods and an RFID tag on the outside has been identified. The associated production order number can now be automatically linked in the database. This means that business data, such as a production order number, can be linked in moneo using data sources like a handheld code scanner or a connection to a PLC.

Data Export of Item History

The physical movements and process data of items can be exported to a JSON file. Use your preferred IT tools, such as MS Power BI, for further research and analysis.

By providing easy access to detailed data, you can make informed decisions more quickly. This feature allows you to efficiently export data and work with powerful analysis tools, significantly improving business processes.

Question 41

Live at a glance: Track & Trace shows identification data in real time

Accepted Answer

Track & Trace has a new function for improved visualisation of device data in real time. The new view shows alphanumeric raw values of the ident data sources live and clearly - similar to the familiar monitoring table. The function also enables a decoding preview.

Question 42

Live at a glance: Track & Trace shows identification data in real time (v1.18)

Accepted Answer

Track & Trace has a new function for improved visualisation of device data in real time. The new view shows alphanumeric raw values of the ident data sources live and clearly - similar to the familiar monitoring table. The function also enables a decoding preview.

Question 43

Ready for generativ AI?

Accepted Answer

The moneo Assistant is your Artificial Intelligence within the IIoT platform moneo.

It helps you to generate actionable insights that empowers to make better decisions with less effort. It helps you to collect all the necessary key information and present hem in a precise and meaningful way in one place – either per chat or natural conversation.

It reduces your workload and increases operational efficiency and with a human-in-the-loop the moneo Assistant can also control your moneo system to take over your routine tasks.

Question 44

Recognised more quickly: Live view shows cause of alarms directly

Accepted Answer

Cause analysis: The new live view makes it much easier to analyse alarms in SmartLimitWatcher. Users no longer have to laboriously navigate through moneo, but instead receive a clear display of all relevant information directly. If required, the user can display the variables used. This makes it immediately recognisable which variable has deviated and led to the alarm (root cause).

Question 45

Recognised more quickly: Live view shows cause of alarms directly (v1.18)

Accepted Answer

Cause analysis: The new live view makes it much easier to analyse alarms in SmartLimitWatcher. Users no longer have to laboriously navigate through moneo, but instead receive a clear display of all relevant information directly. If required, the user can display the variables used. This makes it immediately recognisable which variable has deviated and led to the alarm (root cause).

Question 46

SmartLimitWatcher – Release notes for software version 1.15

Accepted Answer

We have streamlined the moneo Industrial AI Assistant’s set-up process for you, so you can get up and running even faster. This means better performance and less load on your database.

What is more, the moneo SmartLimitWatcher now warns you when too many data samples are selected. This way, you know immediately if the selected amount is adequate, avoiding delays or loss of performance. The system provides real-time feedback for efficient and accurate monitoring.

Question 47

SmartLimitWatcher – release information software version 1.13

Accepted Answer

Do you need help with defining the thresholds? Our improved health indicators now do this for you! Thresholds are created and recommended automatically – all you have to do is accept them.

Analysing and keeping an overview of health indicators is now even easier: view your changing health indicators with a single click from your dashboard.

Question 48

SmartLimitWatcher – release information software version 1.12

Accepted Answer

Trends, level changes and volatility: now it is very easy to recognise these patterns. This is possible with the moneo|DataScience Toolbox’s new tool: the PatternMonitor. It enables automatic anomaly detection of individual critical process variables (e.g. temperature, flow, vibration, etc.). Using statistical methods, the tool checks whether an unexpected pattern occurs. In this way, the behaviour of the critical process variables is permanently monitored and the user is automatically informed of significant deviations.

QM9105

The SmartLimitWatcher has two new health indicators that make it easier to track a developing problem. These indicators evaluate both the monitoring quality and the alarm frequency.

A change in the monitoring quality indicator shows that the original condition at the time of monitoring no longer exists. This should be checked and the monitoring readjusted. The alarm frequency, on the other hand, indicates how many times the limit has been exceeded in a given period of time.

False alarms can be avoided with the new ticket response delay in the SmartLimitWatcher: it prevents immediate creation of a ticket. A ticket is only created if the process value exceeds the limit value x times in succession.

Question 49

Open interface: Flexible access to your moneo data via REST API

Accepted Answer

REST API: moneo expands its interfaces with a REST API. Access your moneo data securely and flexibly and integrate it exactly where it adds value.

Standardised REST endpoints make it easy to connect external systems and applications.

REST API documentation ➜

Question 50

Simpler & more secure login: Now with single sign-on and ifm ID

Accepted Answer

Single sign-on enables you to securely access your cloud instance via your existing identity provider (e.g. Microsoft Azure).
In addition, it is now possible to log in with ifm ID. This allows users with an account to access both moneo Cloud and the mobile IoT Suite. This increases user-friendliness and security.

Question 51

Simplified user management: moneo supports external authentication (v1.18)

Accepted Answer

moneo can be configured to use an external Microsoft Entra ID IDP for user authorisation and authentication. The connection simplifies user management.

Question 52

Miscellaneous – release notes for software version 1.17

Accepted Answer

Single sign-on available

User management is simplified through the connection of single sign-on. This enables both more user-friendly authentication and the allocation of user roles.

Question 53

Miscellaneous – Release notes for software version 1.15

Accepted Answer

moneo on-premises is now also available for Windows 11.

Question 54

Miscellaneous – release notes for software version 1.13

Accepted Answer

Keep up to date with the automatic update notification in moneo!
A working internet connection is required.

By the way: moneo is now also available in Polish.

Question 55

Miscellaneous – release notes for software version 1.12

Accepted Answer

When warning and alarm tickets (e.g. for automatic notification and order creation) are transferred to SAP, a unique ID can now be assigned to a moneo system. This has the decisive advantage that several moneo systems can now transfer tickets to the SAP system via the SFI interface. The moneo systems can be identified with this ID.

For further information: Shop Floor Integration (SFI): the connection to SAP ERP

Question 56

Miscellaneous – release notes for software version 1.10

Accepted Answer

As of this version, moneo also supports a light mode in addition to the dark mode

As of this version, moneo supports a light mode in addition to the dark mode. The user can switch between the two modes at any time via the user management.

Question 57

AMS – moneo appliance – release version 1.11

Accepted Answer

moneo vAppliance can now also be run on a Microsoft Hyper-V Server 2019.

The Appliance Management System is no longer only available in English and German, but also in French, Spanish, Portuguese, Chinese, Japanese and Korean.

Question 58

AMS – moneo appliance – release version 1.10

Accepted Answer

With version 1.10, the moneo appliance and underlying operating system are getting the latest security updates.

Local backups can now also be copied to USB devices.

In the AMS network settings in it is now possible to use DNS alias names. moneo can be addressed in the network via the full qualified domain name (FQDN) of the host, for example.

moneo release notes

Device management

Calculated values

Saved configurations

Device descriptions

edgeConnect

remoteConnect

Monitoring table

Dashboard

Analysis

Tasks and tickets

Settings and rules

AVA assistant

Raw data recording

Layout

Item search

Tracking settings

moneo Assistant

SmartLimitWatcher

PatternMonitor

LifetimeEstimator

Miscellaneous

Appliance Management System

Optimise your production in real time

Are you ready for a smart IO-Link management?

Start now with the moneo IIoT platform