In order to protect the electronics of the sensors from shock, vibration and moisture, potting processes are an essential part of sensor production. For a smooth production process, but also for a constantly high product quality, the permanent availability of casting resin and casting hardener in the storage tank containers is absolutely necessary. The level monitoring application implemented at ifm prover gmbh thus contributes to a reliable logistics organization of temperature-critical media in the production process.
ifm prover gmbh uses a two-component casting resin for potting terminal devices. Among other things, the internal control system monitors the current level of the drums. If the minimum level in one of the drums is not reached, a signal light on the line itself indicates that a drum change is necessary.
In the worst case, the visual signal will be perceived too late on site and the drum will be changed too late.
The refill materials coming directly from the warehouse must be tempered to processing temperature and so cannot be used immediately. Consequently, production can come to a standstill and equipment fail because it cannot be filled with casting resin in the appropriate time.
In order to inform the personnel more reliably when a drum needs to be changed, software-supported level monitoring should be added to the existing alarm via signal lamp. The aim was to ensure uninterrupted supply of casting resin by means of automated, location-independent warning and alarm functions. The two-stage system, consisting of warning and alarm, makes it possible to have the new drum ready at the plant in good time and signal when a drum change is required.
Due to the existing IT structure, moneo has been installed on a central server of ifm prover gmbh to activate the moneo RTM module. The level sensors for drum monitoring are connected to an IO-Link master that in turn is connected to the server - and thus also to moneo RTM - via an internal VLAN.
Level monitoring with moneo RTM has led to a significant optimization of the replacement process and to a more efficient use of resources and personnel. Thanks to the two-stage automatic notification, the procurement of the casting resin could be changed from a time-based to a condition-based provision. Thereby, storage costs can be reduced, maintenance work can be linked to the time when the drum is changed, thus reducing machine downtime to a minimum. The continuous availability of the cast resin has also ensured consistent sensor production quality.
The moneo dashboard provides the user with an overview of the current levels in the installation.
The analysis makes it possible to observe the consumption in the history. This allows conclusions about the capacity utilization of the plant. Moreover, it is possible to estimate how long it is possible to work with one drum. This helps to further optimize the supply planning of internal logistics.
Values for the lower and upper alarm limits are defined for each of the two level sensors. These values are based on the experience in terms of maintenance.
Warning → provision of a new drum at the installation
Alarm → replacement of the drum in the installation
The following value is calculated additionally based on the level.
Since the floor space of the drum is known to be 0.246 m², the fill quantity can be easily determined by using the formula "floor space * level".