Calibration services and certificates

Factory certificate - calibration verification (based on IEC 60770)

• Free of charge and available after the product has been delivered.
• 3-point certificate based on serial number etched on the product.

Available for specific sanitary products only manufactured after January 2018.

• Pressure sensors:  PI27xx, PI28xx, PM1xxx, PG27xx (manufactured after January 2019) and PG28xx (manufactured after January 2019)
• Temperature sensors:  TCCxxx, TA20xx, TA22xx, TA25xx, TA28xx, TD22xx, TD25xx, TD28xx and TD29xx
• Conductivity sensors:  LDLxxx
• Magmeter flow sensors:  SM6x2x, SM7x2x, SM8x2x
• Compressed air flow sensors:  SDx50x

Certificate of Compliance / Conformance

• Certifies that the listed products conform to the datasheet specifications.
• Available for all ifm products.
• Free of charge.
• Can be generated at the time of order or after delivery of products.

Manufacturer's certificate EN10204-2.2 (Part no. ZC0002)
(according to DIN 50049-2.2)

• Certifies that the listed articles conform to the indications in the corresponding data sheet and have been subjected to a 100 % final test.
• Addendums: description of the 100 % tests, data sheet and, where applicable, test specification
• Applies to the specified article(s) and must be ordered with the sensor.  It cannot be generated after the sensor has been delivered.
• Fee charged.  One certificate per sensor required.
• Languages: German / English

Material inspection certificate EN10204-3.1 (Part no. ZC0003)
(according to DIN 50049-3.1)

• Results of batch-related tests to prove that the requirements regarding the material characteristics and quality are met.
• Languages: German / English
• Applies to the specified article(s) and must be ordered with the sensor.  It cannot be generated after the sensor has been delivered.
• Fee charged.  One certificate per sensor required.
• Only issued for sanitary process sensors and fittings (list of products).

Calibration verification certificate for pressure sensors (Part no. ZC0071)

• Generated by 3rd party calibration lab in the US.
• Calibration using equipment traceable to NIST standards.
• Applies to the specified article(s) and must be ordered with the sensor.  It cannot be generated after the sensor has been delivered.
• Fee charged.  One certificate per sensor required.
• Available for all pressure sensors with display or analog signal (list of products).

ISO calibration verfication for SM2/6/7/8/9  flow sensors (Part no. ZC0052)

• Generated by ifm's calibration lab.
• Languages: German/English.
• Applies to the specified article(s) and must be ordered with the sensor.  It cannot be generated after the sensor has been delivered.
• Fee charged.  One certificate per sensor required.
• Only available for SM magmeters (list of products).

ISO calibration verification for SU flow sensors (Part no. ZC0053)

• Generated by ifm's calibration lab.
• Languages: German/English.
• Applies to the specified article(s) and must be ordered with the sensor.  It cannot be generated after the sensor has been delivered.
• Fee charged.  One certificate per sensor required.
• Only available for SU ultrasonic flow meters (list of products).

ISO calibration verification for SD2/5/6/7/8/9  flow sensors (Part no. ZC0020)

• Generated by ifm's calibration lab.
• Languages: German/English.
• Applies to the specified article(s) and must be ordered with the sensor.  It cannot be generated after the sensor has been delivered.
• Fee charged.  One certificate per sensor required.
• Only available for SD compressed air flow meters (list of products).

A2LA calibration verification for temperature sensors 3-point​ (Part no. ZC0064) 

• Created according to A2LA / ILAC MRA per ISO 17025 by ifm's accredited lab in the US.
• Language: German/English
• Calibration at three defined temperatures: 65-85-123 °C
• Applies to the specified article(s) and must be ordered with the sensor.  It cannot be generated after the sensor has been delivered.
• Fee charged.  One certificate per sensor required.
• Only available for temperature sensors (list of products).

A2LA calibration verification for temperature sensors 5-point  (Part no. ZC0065) 

• Created according to A2LA / ILAC MRA per ISO 17025 by ifm's accredited lab in the US.
• Language: German/English
• Calibration at five defined temperatures: 20-65-85-100-123 °C
• Applies to the specified article(s) and must be ordered with the sensor.  It cannot be generated after the sensor has been delivered.
• Fee charged.  One certificate per sensor required.
• Only available for temperature sensors (list of products).

A2LA calibration verification for temperature sensors n-point​ (Part no. ZC0066) 

• Created according to A2LA / ILAC MRA per ISO 17025 by ifm's accredited lab in the US.
• Language: German/English
• Number (max. 4) and position of the calibration points according to customer request (-20...200 °C)
• Applies to the specified article(s) and must be ordered with the sensor.  It cannot be generated after the sensor has been delivered.
• Fee charged.  One certificate per sensor required.
• Only available for temperature sensors (list of products).

ISO calibration verification for temperature sensors 3-point (Part no. ZC0016)

• Created according to the requirements of DIN EN ISO 9001:2008 by ifm's calibration lab
• Language: German/English
• Calibration at three defined temperatures: 65-85-123 °C
• Applies to the specified article(s) and must be ordered with the sensor.  It cannot be generated after the sensor has been delivered.
• Fee charged.  One certificate per sensor required.
• Only available for temperature sensors (list of products).

ISO calibration verification for temperature sensors 5-point (Part no. ZC0017)

• Created according to the requirements of DIN EN ISO 9001:2008 by ifm's calibration lab
• Languages: German/English
• Calibration at five defined temperatures: 20-65-85-100-123 °C
• Applies to the specified article(s) and must be ordered with the sensor.  It cannot be generated after the sensor has been delivered.
• Fee charged.  One certificate per sensor required.
• Only available for temperature sensors (list of products).

ISO calibration verification for temperature sensors n-point (Part no. ZC0018)

• Created according to the requirements of DIN EN ISO 9001:2008 by ifm's calibration lab
• Languages: German/English
• Number (max. 4) and position of the calibration points according to customer request (-20...150 °C)
• Applies to the specified article(s) and must be ordered with the sensor.  It cannot be generated after the sensor has been delivered.
• Fee charged.  One certificate per sensor required.
• Only available for temperature sensors (list of products).

Factory calibration for infrared temperature sensor (Part no. ZC0061) 

• Created according to the requirements of DIN EN ISO9001:2008 by the manufacturer.
• Language: German/English
• Applies to the specified article(s) and must be ordered with the sensor.  It cannot be generated after the sensor has been delivered.
• Fee charged.  One certificate per sensor required.
• Only available for TW2xxx sensors (list of products).