1. Homepage
  2. Products
  3. TN2930

Article no longer available - archive entry

TN2930

Temperature sensor with display

TN-013KBBD10-MFPKG/US/ /V

{{'OPTIONAL_INFO' | productAvailability | error}}

Dear customer,
Unfortunately, this data sheet is not available in the requested language. If you have any further questions, you can contact us by e-mail.

Best regards
Your ifm team

  • ce
  • cul
Download
Technische Details
Product characteristics
Number of inputs and outputs Number of digital outputs: 1; Number of analog outputs: 1
Measuring range
-40...125 °C -40...257 °F
Process connection threaded connection M18 x 1,5 Internal thread
Application
Measuring element 1 x Pt 1000; (to DIN EN 60751, class B)
Application detection of surface temperatures
Media liquids and gases
Pressure rating [bar] 30
Minimum installation depth [mm] 15
Electrical data
Operating voltage [V] 20...30 DC
Current consumption [mA] < 66
Min. insulation resistance [MΩ] 100; (500 V DC)
Protection class III
Reverse polarity protection yes
Power-on delay time [s] 1.5
Integrated watchdog yes
Inputs / outputs
Number of inputs and outputs Number of digital outputs: 1; Number of analog outputs: 1
Outputs
Total number of outputs 2
Output signal switching signal; analog signal; (configurable)
Electrical design PNP
Number of digital outputs 1
Output function normally open / closed; (configurable)
Max. voltage drop switching output DC [V] 2
Permanent current rating of switching output DC [mA] 250
Number of analog outputs 1
Analog current output [mA] 4...20
Max. load [Ω] 500
Analog voltage output [V] 0...10
Min. load resistance [Ω] 2000
Short-circuit protection yes
Type of short-circuit protection yes (non-latching)
Overload protection yes
Measuring/setting range
Probe length L [mm] 45
Measuring range
-40...125 °C -40...257 °F
Set point SP
-39.5...125 °C -39...257 °F
Reset point rP
-40...124.5 °C -40...256 °F
Analog start point
-40...115 °C -40...239 °F
Analog end point
-30...125 °C -22...257 °F
In steps of
0.5 °C 1 °F
Resolution
Resolution of switching output [K] 0.5
Resolution of analog output [K] 0.125
Resolution of display [K] 0.5
Accuracy / deviations
Switch point accuracy [K] ± (Pt 1000 + 0,2 K)
Precision analog output [K] ± (Pt 1000 + 0,2 K + 0,4%)
Display accuracy [K] ± (Pt 1000 + 0,2 K + 1/2 Digit)
Temperature drift per 10 K [K] 0.1
Reaction times
Dynamic response T05 / T09 [s] 1 / 3; (according to DIN EN 60751)
Max. measuring/display cycle [ms] 200
Software / programming
Adjustment of the switch point Programming button
Parameter setting options hysteresis / window; normally open / closed; min/max memory reset; Display unit; zero-point calibration; analog output selectable and scalable
Operating conditions
Ambient temperature [°C] -25...70
Storage temperature [°C] -40...100
Protection IP 67
Tests / approvals
EMC
DIN EN 61000-4-2 ESD 4 kV CD / 8 kV AD
EN 61000-4-3 HF radiated 10 V/m
DIN EN 61000-4-4 Burst 2 kV
EN 61000-4-6 HF conducted 10 V
Shock resistance
DIN IEC 68-2-27 50 g (11 ms)
Vibration resistance
DIN EN 60068-2-6 20 g (10...2000 Hz)
Mechanical data
Housing Compact type for adapter
Material stainless steel (1.4301 / 304); PBT; PC; EPDM/X; FKM
Materials (wetted parts) stainless steel (1.4404 / 316L)
Process connection threaded connection M18 x 1,5 Internal thread
Displays / operating elements
Display
Switching status LED, red
Function display 7-segment LED display
Measured values 7-segment LED display
Remarks
Remarks
The values for accuracy apply to flowing water.
Pack quantity 1 pcs.
Electrical connection
Connection Connector: 1 x M12; Contacts: gold-plated
ifm efector, inc. • 1100 Atwater Drive • Malvern • PA 19355 — We reserve the right to make technical alterations without prior notice. — EN-US — TN2930-00 — 20.01.2004 —