Service Center 800-441-8246
  1. Homepage
  2. Products
  3. Sensors for motion control
  4. Encoders
  5. Absolute multiturn encoders
  6. RMB310

Absolute multiturn encoder with solid shaft

RMB310

MULTITURN ENCODER WET LINE

Absolute multiturn encoder with solid shaft

RMB310

MULTITURN ENCODER WET LINE

  • Absolute position traceability even when unpowered
  • Diagnostic information on temperature, bearing operating time, etc. for real-time maintenance planning
  • Freely programmable total resolution up to 31 bits
  • Programmable digital switching input/output
  • High shock and vibration resistance
{{ifmVariantName}}



  • ce
  • eac
  • iolink
Technical details
Product characteristics
Resolution 65536 steps; 32768 revolutions; 31 bit
Communication interface IO-Link
Shaft design solid shaft
Shaft diameter [mm] 10
Application
Function principle absolute
Revolution type multiturn
Detection system magnetic
Electrical data
Operating voltage [V] 18...30 DC; (to PELV)
Rated insulation voltage [V] 30
Current consumption [mA] < 75
Protection class III
Reverse polarity protection yes
Max. power-on delay time [ms] 1000
Max. revolution electrical [U/min] 6000
Outputs
Short-circuit protection yes
Measuring/setting range
Resolution 65536 steps; 32768 revolutions; 31 bit
Accuracy / deviations
Accuracy [°] 0.1
Software / programming
Parameter setting options preset; Zero point; Direction of rotation; rotational speed
Interfaces
Communication interface IO-Link
Transmission type COM3 (230,4 kBaud)
IO-Link revision 1.1
SDCI standard IEC 61131-9 CDV
Profiles Identification and Diagnosis; Switching Signal Channel; Measurement Data Channel (high resolution)
SIO mode no
Required master port class A
Min. process cycle time [ms] 2.3
IO-Link process data (cyclical)
Function bit length
process value 96
device status 4
binary switching information 5
IO-Link functions (acyclical) application specific tag; operating hours counter; internal temperature; switching cycles counter
Supported DeviceIDs
Type of operation DeviceID
default 1064
Note
For further information please see the IODD PDF file at "Downloads"
Operating conditions
Ambient temperature [°C] -40...85
Storage temperature [°C] -40...85
Max. relative air humidity [%] 98; (Condensation not permissible)
Protection IP 68; IP 69K
Tests / approvals
EMC
DIN EN 61000-4-2 ESD 4 kV CD
DIN EN 61000-4-3 HF radiated 10 V/m
DIN EN 61000-4-4 Burst 2 kV
DIN EN 61000-4-6 HF conducted 10 V
Vibration resistance
DIN EN 60068-2-6 30 g / 10...1000 Hz half-sine
Shock resistance
DIN EN 60068-2-27 200 g / 11 ms
Continuous shock resistance
DIN EN 60068-2-29 30 g / 6 ms half-sine
MTTF [years] 283
Mechanical data
Weight [g] 472.1
Dimensions [mm] Ø 42 / L = 107.9
Material flange: stainless steel (1.4404 / 316L); housing: stainless steel (1.4404 / 316L)
Max. starting torque [Nm] 5
Reference temperature torque [°C] 20
Shaft design solid shaft
Shaft diameter [mm] 10
Shaft material
stainless steel (1.4112 / 440B)
Max. shaft load axial (at the shaft end) [N] 300
Max. shaft load radial (at the shaft end) [N] 300
Fixing flange Synchro-flange
Electrical connection - plug
Connector: 1 x M12; Moulded body: stainless steel (1.4401 / 316)
ifm efector, inc. • 1100 Atwater Drive • Malvern • PA 19355 — We reserve the right to make technical alterations without prior notice. — EN-US — RMB310-00 — 02.10.2019 —