1. Homepage
  2. Products
  3. Sensors for motion control
  4. Speed sensors
  5. Compact speed monitors
  6. DI602A

DI602A

Compact evaluation unit for speed monitoring

DGA4012-WPKG/US/3D

{{'OPTIONAL_INFO' | productAvailability | error}}

Dear customer,
Unfortunately, this data sheet is not available in the requested language. If you have any further questions, you can contact us by e-mail.

Best regards
Your ifm team

  • For applications in hazardous areas
  • Reliable non-contact monitoring of the rotational speed with regard to underspeed
  • 2 in 1: speed sensor and evaluation in one compact housing
  • Easy setting of the switch point via teach button
  • For direct connection to a PLC
  • ce
Download
Technische Details
Product characteristics
Electrical design PNP
Output function normally open / closed; (configurable)
Sensing range [mm] 8
Dimensions [mm] M18 x 1 / L = 68
Application
System gold-plated contacts
Application evaluation of rotating and linear movements with regard to underspeed; blocking
Electrical data
Nominal voltage DC [V] 10...36
Current consumption [mA] < 15
Protection class II
Reverse polarity protection yes
Outputs
Electrical design PNP
Output function normally open / closed; (configurable)
Max. voltage drop switching output DC [V] 2.5
Permanent current rating of switching output DC [mA] 150; (when used outside the ATEX area: 250; Pulse output: 15)
Short-circuit protection yes
Type of short-circuit protection yes (non-latching)
Overload protection yes
Monitoring range
Sensing range [mm] 8
Sensing range adjustable no
Operating distance [mm] 0...6
Measuring/setting range
Setting range [Imp/min] 3...6000
Accuracy / deviations
Correction factor steel: 1 / stainless steel: 0.7 / brass: 0.5 / aluminum: 0.4 / copper: 0.3
Hysteresis [% of Sr] 10
Reaction times
Start-up delay [s] 0...15
Max. damping frequency [Imp/min] 18000
Software / programming
Adjustment of the switch point Teach function
Operating conditions
Ambient temperature [°C] -20...50
Note on ambient temperature
when used outside the ATEX area -20...60
Storage temperature [°C] -25...60
Protection IP 67
Tests / approvals
ATEX marking II 3D Ex tc IIIC T80°C Dc IP67 U
Note on ATEX marking
only in conjunction with the impact protective housing
EMC
EN 60947-5-2
MTTF [years] 1051
Mechanical data
Weight [g] 177
Mounting non-flush mountable
Dimensions [mm] M18 x 1 / L = 68
Thread designation M18 x 1
Material stainless steel (1.4571/316Ti ); PBT; TPE-U
Displays / operating elements
Display
Switching status 1 x LED, yellow
Power 1 x LED, green
input signal 1 x LED, green
Accessories
Accessories (supplied)
lock nuts: 2
impact protection housing
Mounting clamp
Electrical connection - plug
Connection Connector: 1 x M12; Contacts: gold-plated
ifm efector, inc. • 1100 Atwater Drive • Malvern • PA 19355 — EN-US — DI602A — 31.08.2012 —