1. Продукти
  2. Датчики
  3. Датчики швидкості
  4. Компактні датчики швидкості для вибухонебезпечних зон
  5. DI604A

Compact evaluation unit for speed monitoring

DI604A

DGA4008-WRKG/IO/US/3D

Compact evaluation unit for speed monitoring

DI604A

DGA4008-WRKG/IO/US/3D

  • Для застосування у вибухонебезпечному середовищі
  • Надійний безконтактний моніторинг швидкості обертання щодо зниженої швидкості
  • 2 в 1: датчик швидкості та оцінка в одному компактному корпусі
  • Easy setting of the switch point via teach button or IO-Link
  • З IO-Link для передавання сигналів і діагностичних даних
  • ce
  • ukca
  • ex
Product characteristics
Electrical design PNP/NPN; (parameterisable)
Output function normally open / normally closed; (parameterisable)
Sensing range [mm] 8
Communication interface IO-Link
Housing threaded type
Dimensions [mm] M18 x 1 / L = 76.4
Application
Special feature Gold-plated contacts
Application evaluation of rotating and linear movements with regard to underspeed; blocking
Electrical data
Operating voltage [V] 10...30 DC
Current consumption [mA] < 15
Protection class II
Reverse polarity protection yes
Outputs
Electrical design PNP/NPN; (parameterisable)
Output function normally open / normally closed; (parameterisable)
Max. voltage drop switching output DC [V] 2.5
Factory setting
Electrical design: PNP
Output function: normally open
switch point: 100 Imp/min
Output OUT2: Pulse output
Short-circuit protection yes
Overload protection yes
switching output (OUT1)
Output signal switching signal
Permanent current rating of switching output DC [mA] 250
Pulse output / switching output (OUT2)
Output signal pulse signal; switching signal; (parameterisable)
Permanent current rating of switching output DC [mA] 100
Switching frequency DC [Hz] < 500
Pulse output external evaluation of the damping pulses
Detection zone
Sensing range [mm] 8
Measuring/setting range
Measuring range [Imp/min] 1...32000
Setting range [Imp/min] 3...24000
Measuring principle inductive
Accuracy / deviations
Correction factor stainless steel: 0.7 / brass: 0.4 / aluminium: 0.4 / copper: 0.3
Hysteresis [X01] 10
Hysteresis [X15] 10...30
Repeatability IO-Link [%] 1; (of the final value of the measuring range)
Temperature drift ± 10 %; (of the final value of the measuring range)
Response times
Start-up delay [s] 0...15; (In steps of: 1 s; Default: 10 s)
Max. damping frequency [Imp/min] 60000
IO-Link
Start-up delay [s] 0...30; (In steps of: 100 ms; Default: 10 s)
Interfaces
Communication interface IO-Link
Transmission type COM2 (38,4 kBaud)
IO-Link revision 1.1
SDCI standard IEC 61131-9
Profiles Smart Sensor: Measuring and Switching Sensor, high resolution, 1 channel, Identification and Diagnosis, Locator, ProductURI
SIO mode yes
Required master port type A
Min. process cycle time [ms] 3.7
IO-Link process data (cyclical)
function bit length
process value 32
device status 4
binary switching information 2
IO-Link functions (acyclical) switch-on cycle counter; operating hours counter; internal temperature; application specific tag
Supported DeviceIDs
Type of operation DeviceID
default 1444
Note
For further information please see the IODD PDF file under "Downloads"
Operating conditions
Ambient temperature [°C] -20...60
Protection IP 67
Tests / approvals
ATEX marking II 3D Ex tc IIIC T80°C Dc X
EMC
EN 61000-4-2 ESD 4 kV CD / 8 kV AD
EN 61000-4-3 HF radiated 10 V/m
EN 61000-4-4 Burst 2 kV
EN 61000-4-6 HF conducted 10 V
EN55011 class B
Vibration resistance
EN 60068-2-6 Fc 20 g (10...3000 Hz)
50 sweep cycles, 1 octave per minute, in 3 axes
Shock resistance
EN 60068-2-27 Ea 100 g 11 ms half-sine; 3 shocks each in every direction of the 3 coordinate axes
Continuous shock resistance
EN 60068-2-27 41 g 6 ms; 4000 shocks each in every direction of the 3 coordinate axes
Fast temperature change
EN 60068-2-14 Na TA = -25°C; TB = 80°C; t1 = 30 min; t2 = <10 s 50 cycles
Salt spray test
EN 60068-2-52 Kb severity level 5 (4 test cycles)
MTTF [ANN] 471
Mechanical data
Weight [g] 75
Housing threaded type
Mounting non-flush mountable
Dimensions [mm] M18 x 1 / L = 76.4
Thread designation M18 x 1
Materials housing: stainless steel (1.4404 / 316L); sensing face: PA; LED window: PEI; lock nuts: stainless steel (1.4404 / 316L)
Tightening torque [Nm] 35
Displays / operating elements
Display
operation 4 x LED, green
switching output 4x LED, yellow
error message 4x LED, red
Аксесуари
Items supplied
lock nuts: 2
Remarks
Pack quantity 1 pcs.
Electrical connection
Connection Connector: 1 x M12; coding: A; Contacts: gold-plated