| Electrical data |
| Operating voltage [V] |
26.5...31.6 DC |
| Current consumption [mA] |
< 250 |
| Max. current load total [A] |
0.3 |
| Integrated watchdog |
yes |
| Inputs / outputs |
| Number of inputs and outputs |
Number of digital inputs: 4; Number of digital outputs: 4 |
| Inputs |
| Number of digital inputs |
4 |
| Input circuit of digital inputs |
PNP |
| Sensor supply of the inputs |
AS-i |
| Voltage supply [V] |
20...30 |
| Max. total current rating of inputs [mA] |
140 |
| Input current High [mA] |
6...10 |
| Input current Low [mA] |
0...2 |
| Min. switching level high signal [V] |
10 |
| Digital inputs protected against short circuits |
yes |
| Outputs |
| Electrical design |
AS-i |
| Number of digital outputs |
4 |
| Voltage range DC [V] |
18...30; (to PELV) |
| Voltage range AC [V] |
110...400 |
| Max. current load per output [mA] |
150; (external outputs: Short-circuit proof; reversing contactor: not protected against short circuits) |
| Electrically separated |
yes |
| Operating conditions |
| Ambient temperature [°C] |
0...60 |
| Protection |
IP 54 |
| Tests / approvals |
| EMC |
|
| AS-i classification |
| AS-i version |
2.0 |
| Extended addressing mode possible |
no |
| AS-i profile |
S-7.0 |
| AS-i I/O configuration [hex] |
7 |
| AS-i ID code [hex] |
0 |
| Mechanical data |
| Weight [g] |
555 |
| Type of mounting |
backplane mounting |
| Dimensions [mm] |
180 x 182 x 90 |
| Materials |
PC glass fibre reinforced; flame-retardant; UV resistant |
| Displays / operating elements |
| Display |
| switching status |
LED, yellow |
| operation |
LED, green |
| errors |
LED, red |
|
| Remarks |
| Remarks |
| The PowerSwitch motor starter uses two outputs to trigger the reversing contactors (motor right/left/off). |
| Two further outputs can be connected at will. |
| The messages "motor protection activated" and "hand-held operating panel connected" are indicated via the input data bits. |
| Sensors can be connected to two additional inputs. |
|
| Pack quantity |
1 pcs. |
