1. Homepage
  2. Products
  3. Process sensors
  4. Temperature sensors
  5. Self-monitoring transmitters
  6. TCC501


Temperature transmitter


{{'OPTIONAL_INFO' | productAvailability | error}}

Dear customer,
Unfortunately, this data sheet is not available in the requested language. If you have any further questions, you can contact us by e-mail.

Best regards
Your ifm team

  • Immediate notification of deviations in accuracy
  • Improved quality assurance in between calibration intervals
  • Robust design for permanently precise measurements even in demanding environments
  • Transparent sensor monitoring thanks to logging of the diagnostic values
  • Simulation function simplifies installation
  • ce
  • fda
  • iolink
  • cul
  • ec19352004
  • 3a

Technische Details
Product characteristics
Number of inputs and outputs Number of digital outputs: 1; Number of analogue outputs: 1
Measuring range
-25...160 °C -13...320 °F
Process connection threaded connection G 1/2 sealing cone
Installation length EL [mm] 30
Special feature Gold-plated contacts
Measuring element 1 x Pt 1000
Reference element 1 x NTC
Media liquids and gases
Pressure rating [bar] 160
Electrical data
Operating voltage [V] 18...32 DC; ("supply class 2" to cULus)
Current consumption [mA] 10; (24 V)
Protection class III
Reverse polarity protection yes
Power-on delay time [s] 6
Integrated watchdog yes
Inputs / outputs
Number of inputs and outputs Number of digital outputs: 1; Number of analogue outputs: 1
Total number of outputs 2
Output signal analogue signal; IO-Link; calibration check status
Electrical design PNP/NPN
Number of digital outputs 1
Output function normally open; (diagnostic signal)
Max. voltage drop switching output DC [V] 2
Permanent current rating of switching output DC [mA] 100
Diagnostic output calibration check status and error diagnostics
Number of analogue outputs 1
Analogue current output [mA] 4...20
Max. load [Ω] (Ub - 15 V) x 50
Short-circuit protection yes
Type of short-circuit protection pulsed
Overload protection yes
Measuring/setting range
Measuring range
-25...160 °C -13...320 °F
Note on measuring range
Factory setting -10...150 °C / 14...302 °F
Calibration check limit [K] 0.5...3
In steps of [K] 0.05
Resolution of analogue output [K] 0.05
Accuracy / deviations
Precision analogue output [K] ± 0,2
Precision IO-Link [K] ± 0,2
Temperature coefficient analogue output [% of the span / 10 K] < ± 0,02; (in case of deviation from the reference condition 25 ± 5 °C)
Temperature coefficient IO-Link [% of the span / 10 K] < ± 0,01; (in case of deviation from the reference condition 25 ± 5 °C)
Response times
Dynamic response T05 / T09 [s] 1,5 / 4
Software / programming
Parameter setting options Display unit; scaling of the analogue output; calibration check limit; switching logic diagnostic output; simulation mode
Communication interface IO-Link
Transmission type COM2 (38,4 kBaud)
IO-Link revision 1.1
SDCI standard IEC 61131-9 CDV
IO-Link device ID 1129 d / 00 04 69 h
Profiles Digital Measuring Sensor, Common Profile, Blob Transfer
SIO mode yes
Required master port type A
Process data analogue 1
Process data binary 1
Min. process cycle time [ms] 4.4
IO-Link resolution temperature [K] 0.01
Operating conditions
Ambient temperature [°C] -25...70
Note on ambient temperature
max. internal device temperature: 125 °C
Storage temperature [°C] -40...100
Protection IP 68; IP 69K
Tests / approvals
DIN EN 61000-6-2
DIN EN 61000-6-3
Shock resistance
DIN EN 68000-2-27 50 g (11 ms)
Vibration resistance
DIN EN 60068-2-6 35 g (10...2000 Hz)
MTTF [years] 329
UL approval
UL Approval no. K021
File number UL E217884
Mechanical data
Weight [g] 365.1
Dimensions [mm] Ø 50 / L = 124
Materials stainless steel (1.4404 / 316L); PEI; FKM; PFA
Materials (wetted parts) stainless steel (1.4404 / 316L); PEEK
Process connection threaded connection G 1/2 sealing cone
Surface characteristics Ra/Rz of the wetted parts Ra: < 0.8
Probe diameter [mm] 6
Installation length EL [mm] 30
MS = set measuring span
operating voltage "supply class 2" according to cULus
Pack quantity 1 pcs.
Electrical connection
Connection Connector: 1 x M12; Contacts: gold-plated
ifm electronic gmbh • Friedrichstraße 1 • 45128 Essen — We reserve the right to make technical alterations without prior notice. — EN-GB — TCC501-00 — 08.11.2019 —