| Product characteristics |
| Frequency range [Hz] |
2...10000 |
| Measuring principle |
capacitive |
| v-RMS |
| Measuring range of vibration [mm/s] |
0...45 |
| a-Peak / a-RMS |
| Measuring range of vibration |
|
| Application |
| Application |
big machines, performance > 300 kW, speed 120...600 rpm |
| Electrical data |
| Operating voltage [V] |
18...30 DC |
| Current consumption [mA] |
< 50 |
| Min. insulation resistance [MΩ] |
100; (500 V DC) |
| Protection class |
III |
| Reverse polarity protection |
yes |
| Sensor type |
microelectromechanical system (MEMS) |
| Inputs / outputs |
| Number of inputs and outputs |
Number of digital outputs: 2 |
| Outputs |
| Output signal |
switching signal; IO-Link |
| Electrical design |
PNP/NPN; (configurable) |
| Number of digital outputs |
2 |
| Output function |
normally open / normally closed |
| Max. voltage drop switching output DC [V] |
2 |
| Max. current load per output [mA] |
100 |
| Short-circuit protection |
yes |
| Type of short-circuit protection |
pulsed |
| Overload protection |
yes |
| Measuring/setting range |
| Note on setpoint SP |
|
| Frequency range [Hz] |
2...10000 |
| Measuring principle |
capacitive |
| Number of measurement axes |
1 |
| v-RMS |
| Measuring range of vibration [mm/s] |
0...45 |
| Set point SP [mm/s] |
0.2...45 |
| Reset point rP [mm/s] |
0...44.8 |
| In steps of [mm/s] |
0.2 |
| a-Peak / a-RMS |
| Measuring range of vibration |
|
| Set point SP |
| 0.2...50 g |
2...490.3 m/s² |
|
| Reset point rP |
| 0...49.8 g |
0...488.3 m/s² |
|
| In steps of |
|
| Crest |
| Measuring range of vibration |
1...50 |
| Set point SP |
2...50 |
| Reset point rP |
1...49 |
| In steps of |
1 |
| Temperature measurement |
| Measuring range [°C] |
-30...80 |
| Resolution [°C] |
0.1 |
| Set point SP [°C] |
-28...80 |
| Reset point rP [°C] |
-30...78 |
| In steps of [°C] |
2 |
| Accuracy / deviations |
| Accuracy |
≤ 4 kHz +/-10 %;
≥ 4...10 kHz: < 3 dB |
| Accuracy [K] |
± 2,5 K + (0,2 x (Umgebungstemperatur - Oberflächentemperatur)) |
| Linearity deviation |
2 % |
| Software / programming |
| Parameter setting options |
Software |
| Diagnostic functions |
self-test |
| Interfaces |
| Communication interface |
IO-Link |
| Transmission type |
COM2 (38,4 kBaud); COM3 (230,4 kBaud) |
| IO-Link revision |
1.1 |
| SDCI standard |
IEC 61131-9: 2013-07 |
| Profiles |
Blob (0x0030); Measuring sensor (0x800A); Common Profile (0x4000) |
| SIO mode |
yes |
| Required master port type |
A |
| Process data analogue |
10 |
| Process data binary |
2 |
| Min. process cycle time [ms] |
3.6 |
| IO-Link functions (acyclical) |
filter for v-RMS, a-RMS, a-Peak; Hysteresis; window; switch points; switching logic |
| Supported DeviceIDs |
| Type of operation |
DeviceID |
| Status A (COM2) |
1256 |
| Status B (COM2 / COM3) |
1371 |
|
| Note |
| For further information please see the IODD PDF file under "Downloads" |
|
| Operating conditions |
| Ambient temperature [°C] |
-30...80 |
| Storage temperature [°C] |
-30...80 |
| Protection |
IP 67; IP 68; IP 69K |
| Tests / approvals |
| EMC |
| 2014/30/EU |
|
| DIN EN 61000-6-2 |
|
| DIN EN 61000-6-3 |
|
|
| Shock resistance |
| DIN EN 60068-2-27 |
50 g 11 ms |
|
500 g 1 ms |
|
| Vibration resistance |
| DIN EN 60068-2-6 |
20 g / 10...3000 Hz |
|
| MTTF [years] |
299 |
| UL approval |
| Ta |
-30...70 °C |
| UL Approval no. |
L002 |
|
| Mechanical data |
| Weight [g] |
116.5 |
| Type of mounting |
set screw |
| Materials |
housing: stainless steel (1.4404 / 316L) |
| Tightening torque [Nm] |
8 |
| Accessories |
| Items supplied |
| set screw: 1 x 1/4" 28 UNF / M8 |
| set screw: 1 x 1/4"28 UNF x 5/8" DIN916 |
|
| Remarks |
| Pack quantity |
1 pcs. |
| Electrical connection |
|
Connector: 1 x M12; coding: A; Maximum cable length: 20 m |
