1. Homepage
  2. Products
  3. Condition monitoring systems
  4. Systems for vibration monitoring and diagnostics
  5. Vibration sensors and transmitters
  6. VVB010

VVB010

Vibration sensor

VIBRATION IO-LINK SWITCH

{{'OPTIONAL_INFO' | productAvailability | error}}

Dear customer,
Unfortunately, this data sheet is not available in the requested language. If you have any further questions, you can contact us by e-mail.

Best regards
Your ifm team

  • Wide operating temperature range
  • High protection rating for the requirements of harsh industrial environments
  • Compact and robust stainless steel housing with high mechanical overload protection
  • ce
  • iolink

Download
Technische Details
Product characteristics
Measuring range of vibration
0...50 g 0...490.3 m/s² 0...45 mm/s
Frequency range [Hz] 2...10000
Measuring principle capacitive
Application
Application big machines, performance > 300 kW, speed > 600 rpm
Electrical data
Operating voltage [V] 18...30 DC
Current consumption [mA] < 250
Min. insulation resistance [MΩ] 100; (500V DC)
Protection class III
Reverse polarity protection yes
Sensor type microelectromechanical system (MEMS)
Inputs / outputs
Number of inputs and outputs Number of digital outputs: 2
Outputs
Output signal switching signal; IO-Link
Electrical design PNP/NPN; (configurable)
Number of digital outputs 2
Output function normally open / normally closed
Max. voltage drop switching output DC [V] 2
Max. current load per output [mA] 100
Short-circuit protection yes
Type of short-circuit protection pulsed
Overload protection yes
Measuring/setting range
Note on setpoint SP
parameterisable
Measuring range of vibration
0...50 g 0...490.3 m/s² 0...45 mm/s
Frequency range [Hz] 2...10000
Measuring principle capacitive
Number of measurement axes 1
Set point SP
0.2...50 g 2...490.3 m/s² 0.2...45 mm/s
Reset point rP
0...49.8 g 0...488.3 m/s² 0...44.8 mm/s
In steps of
0.2 g 2 m/s² 0.2 mm/s
Temperature measurement
Measuring range [°C] -30...80
Resolution [°C] 0.1
Accuracy / deviations
Accuracy < 4 kHz +/-10 %; < 10 kHz < 3 dB
Linearity deviation 2 %
Software / programming
Parameter setting options Software
Diagnostic functions self-test
Interfaces
Communication interface IO-Link
Transmission type COM2 (38,4 kBaud)
IO-Link revision 1.1
SDCI standard IEC 61131-9: 2013-07
IO-Link device ID 1255d / 0004E7h
Profiles Blob (0x0030); Measuring sensor (0x800A); Common Profile (0x4000)
SIO mode yes
Required master port type A
Process data analogue 10
Process data binary 2
Min. process cycle time [ms] 11.6
IO-Link functions (acyclical) filter for v-RMS, a-RMS, a-Peak; Hysteresis; window; switch points; switching logic
Operating conditions
Ambient temperature [°C] -30...80
Storage temperature [°C] -30...80
Protection IP 67; IP 68; IP 69K
Tests / approvals
EMC
DIN EN 61000-6-2
DIN EN 61000-6-3
DIN EN 50178
Shock resistance
DIN EN 60068-2-27 50 g 11 ms
Vibration resistance
DIN EN 60068-2-6 20 g / 10...3000 Hz
MTTF [years] 299
Mechanical data
Weight [g] 116
Type of mounting set screw
Materials housing: stainless steel (1.4404 / 316L)
Tightening torque [Nm] 8
Accessories
Components
set screw: 1 x 1/4" 28 UNF / M8
set screw: 1 x 1/4"28 UNF x 5/8" DIN916
Remarks
Pack quantity 1 pcs.
Electrical connection
Connector: 1 x M12; Maximum cable length: 20 m
ifm electronic gmbh • Friedrichstraße 1 • 45128 Essen — We reserve the right to make technical alterations without prior notice. — EN-GB — VVB010-00 — 22.11.2019 —