3D camera

O3X100

O3XIOOKG/E1/GM/S/60

3D camera

O3X100

O3XIOOKG/E1/GM/S/60

phase-out article

Alternative articles: O3X120 Product comparison: O3X100 / O3X120 When selecting an alternative article and accessories please note that technical data may differ!

Product characteristics

Type of light	infrared light
Image resolution 3D [px]	224 x 172
Angle of aperture 3D [°]	60 x 45
Max. reading rate [Hz]	20

Application

Application	output of 3D image data

Electrical data

Operating voltage [V]	20.4...28.8 DC; (EN 61131-2)
Current consumption [mA]	< 500; (peak current pulsed; typical value: 160)
Power consumption [W]	3.7
Protection class	III
Type of light	infrared light
Wave length [nm]	850
Image sensor	PMD 3D ToF-Chip
Internal lighting	yes; (infrared: 850 nm invisible radiation LED)

Detection zone

Operating distance [mm]

50...3000

Note on operating distance

object size: 200 x 200 mm

reflectivity: 18 %

Image resolution 3D [px]

224 x 172

Angle of aperture 3D [°]

60 x 45

Max. reading rate [Hz]

Measuring/setting range

Measuring range [m]	< 30; (depending on settings, object size, and reflectivity)

Software / programming

Parameter setting options	via PC with ifm Vision Assistant or XML-RPC

Interfaces

Communication interface	Ethernet
Usage type	parameter setting; data transmission

Ethernet

Number of Ethernet interfaces

Transmission standard

10Base-T; 100Base-TX

Transmission rate

10; 100

Protocol

TCP/IP

Factory settings

IP address: 192.168.0.69

subnet mask: 255.255.255.0

gateway IP address: 192.168.0.201

Operating conditions

Ambient temperature [°C]

-10...40

Note on ambient temperature

Housing: < 45° C

see operating instructions

Storage temperature [°C]

-40...85

Protection

IP 50

Max. immunity to extraneous light [klx]

Tests / approvals

EMC

DIN EN 61000-6-3	radiation of interference / residential, commercial and light-industrial environments
DIN EN 61000-6-2	immunity / industrial environments

Shock resistance

DIN EN 60068-2-27	50 g / (11 ms) not repetitive
DIN EN 60068-2-27	40 g / (6 ms) repetitive

Vibration resistance

DIN EN 60068-2-6	2 g / (10...150 Hz)
DIN EN 60068-2-64	2.3 g RMS / (10...500 Hz)

Laser protection class

Notes on laser protection

Caution:	laser light
laser class:	1
IEC 60825-1:2014

Electrical protection

DIN EN 61010-2-201

electrical supply only via PELV circuits

MTTF [years]

Mechanical data

Weight [g]	267.5
Dimensions [mm]	80 x 43.5 x 21
Materials	housing: diecast zinc; front pane: PMMA

Remarks

Pack quantity	1 pcs.

Electrical connection

	Cable: 1 m, PVC
	Connector: 1 x RJ45

Other data

Field of view size

	without lens distortion correction
measuring range / distance [m]	Length [m]	Width [m]
0.50	0.60	0.40
1.00	1.10	0.80
1.50	1.70	1.30
2.00	2.30	1.70
2.50	2.80	2.10
3.00	3.40	2.50

Repeatability

measuring range / distance [m]	Exposure time [µs]	Repeatability	accuracy [mm]
		Measured distance values (1 Sigma) on grey objects
		reflectivity 18 % [mm]
0.1...0.25	200	± 5	± 5
0.25...0.5	400	± 5	± 5
0.5...1	1000	± 7	± 10
1...2	2000	± 15	± 20
2...3	2000	± 60	± 40

Repeatability
referred to	distance measurement of an individual pixel
Measured at	centre of image with median filter
Ambient temperature	20° C

Temperature drift

-10...+40° C [mm/K]

0.2

Relative accuracy

typical

± 4

measured at a reflectivity of 18% to 90%

ifm electronic gmbh • Friedrichstraße 1 • 45128 Essen — We reserve the right to make technical alterations without prior notice. — EN-GB — O3X100-00 — 01.12.2022 —