1. Homepage
  2. Products
  3. Industrial communication
  4. AS-Interface I/O modules
  5. Field modules for wet areas ProcessLine
  6. AC2923


AS-Interface ProcessLine module

ProcessLine 4AI C IP69K

{{'OPTIONAL_INFO' | productAvailability | error}}

Dear customer,
Unfortunately, this data sheet is not available in the requested language. If you have any further questions, you can contact us by e-mail.

Best regards
Your ifm team

  • Specially for the use in wet areas of the food and beverage industry
  • Hygienic design without corners and edges
  • Resistant to high-pressure cleaning with aggressive cleaning agents
  • Clearly visible powerful LEDs for displaying operation, switching status and error
  • ce
  • asi
  • cul

Technische Details
Electrical data
Operating voltage [V] 26.5...31.6 DC
Max. current consumption from AS-i [mA] 450
Reverse polarity protection yes
Inputs / outputs
Number of inputs and outputs Number of analogue inputs: 4
Number of analogue inputs 4; (Anschluss von 2-, 3-, 4-Draht-Sensoren)
Sensor supply of the inputs AS-i
Digital inputs protected against short circuits yes
Analogue input (current) [mA] 4...20
Max. voltage drop across load for nominal voltage [V] 10
Resolution of analogue input 12 bit
Operating conditions
Ambient temperature [°C] -5...70
Protection IP 68; IP 69K
Tests / approvals
EN 50295
MTTF [years] 98
AS-i classification
AS-i version 2.11 + 3.0
Extended addressing mode possible no
AS-i profile S-7.3.E
AS-i I/O configuration [hex] 7
AS-i ID code [hex] 3.E
AS-i certificate 101108
Mechanical data
Weight [g] 625
Dimensions [mm] 137.3 x 80 x 137.3
Materials threaded bush: stainless steel (1.4404 / 316L); PC; O-ring: EPDM
Displays / operating elements
operation LED, green Voltage AS-i
errors LED, red
function LED, yellow channels AI1...AI4
Accessories (optional)
Protective cap: M12, E70297
Flat cable insulation displacement connector, E70454
Torque wrench, E70390
When the sensors and actuators are supplied from AS-i the load must not exceed a maximum of 380 mA.
The load for an individual sensor connection must not exceed 200 mA.
When connecting a 2-wire or 3-wire sensor without own supply there has to be an external link between pin 3 and pin 4.
The inputs (pins 2 and 4) are electrically separated and have no connection to AS-i.
The sensor supply (pins 1 and 3) is electrically connected to AS-i.
Pack quantity 1 pcs.
Electrical connection - AS-i
Connector: 1 x M12
Electrical connection - Process connection
Connector: 4 x M12
ifm electronic gmbh • Friedrichstraße 1 • 45128 Essen — We reserve the right to make technical alterations without prior notice. — EN-GB — AC2923-00 — 01.04.2014 —