1. Homepage
  2. Products
  3. TN7530

Article no longer available - archive entry

Replaced by: TN7531 – Product comparison: TN7530 / TN7531


Temperature sensor with display


{{'OPTIONAL_INFO' | productAvailability | error}}

Dear customer,
Unfortunately, this data sheet is not available in the requested language. If you have any further questions, you can contact us by e-mail.

Best regards
Your ifm team

  • ce
  • cul
Technische Details
Product characteristics
Number of inputs and outputs Number of digital outputs: 2
Measuring range
-40...125 °C -40...257 °F
Process connection threaded connection M18 x 1,5 internal thread
Special feature Gold-plated contacts
Measuring element 1 x Pt 1000; (to DIN EN 60751, class B)
Media liquids and gases
Pressure rating [bar] 300
Minimum installation depth [mm] 15
Electrical data
Operating voltage [V] 18...30 DC
Current consumption [mA] < 50
Min. insulation resistance [MΩ] 100; (500 V DC)
Protection class III
Reverse polarity protection yes
Power-on delay time [s] 1.5
Integrated watchdog yes
Inputs / outputs
Number of inputs and outputs Number of digital outputs: 2
Total number of outputs 2
Output signal switching signal
Electrical design PNP
Number of digital outputs 2
Output function normally open / normally closed; (parameterisable)
Max. voltage drop switching output DC [V] 2
Permanent current rating of switching output DC [mA] 250
Short-circuit protection yes
Type of short-circuit protection pulsed
Overload protection yes
Measuring/setting range
Probe length L [mm] 45
Measuring range
-40...125 °C -40...257 °F
Set point SP
-39.5...125 °C -39...257 °F
Reset point rP
-40...124.5 °C -40...256 °F
In steps of
0.5 °C 1 °F
Resolution of switching output [K] 0.5
Resolution of display [K] 0.5
Accuracy / deviations
Switch point accuracy [K] ± (Pt 1000 + 0,2 K)
Display accuracy [K] ± (Pt 1000 + 0,2 K + ½ Digit)
Temperature drift per 10 K [K] 0.1
Response times
Dynamic response T05 / T09 [s] 1 / 3; (to DIN EN 60751)
Software / programming
Adjustment of the switch point programming button
Parameter setting options hysteresis / window; normally open / normally closed; min/max memory reset; Display unit; zero-point calibration
Operating conditions
Ambient temperature [°C] -25...70
Storage temperature [°C] -40...100
Protection IP 67
Tests / approvals
DIN EN 61000-4-2 ESD 4 kV CD / 8 kV AD
EN 61000-4-3 HF radiated 10 V/m
DIN EN 61000-4-4 Burst 2 kV
EN 61000-4-6 HF conducted 10 V
Shock resistance
DIN IEC 68-2-27 50 g (11 ms)
Vibration resistance
DIN EN 60068-2-6 20 g (10...2000 Hz)
Mechanical data
Housing for adapter
Materials stainless steel (1.4301 / 304); EPDM/X; CO-PC; PBT; FKM; PA
Materials (wetted parts) stainless steel (1.4404 / 316L)
Process connection threaded connection M18 x 1,5 internal thread
Displays / operating elements
switching status 2 x LED, red
function display 7-segment LED display
measured values 7-segment LED display
The values for accuracy apply to flowing water.
Pack quantity 1 pcs.
Electrical connection
Connection Connector: 1 x M12; Contacts: gold-plated
ifm electronic gmbh • Friedrichstraße 1 • 45128 Essen — We reserve the right to make technical alterations without prior notice. — EN-GB — TN7530-00 — 13.01.2004 —