1. Homepage
  2. Products
  3. AC2502

Article no longer available - archive entry

Alternative article: AC5202 – Product comparison: AC2502 / AC5202
Note any deviating technical data for the selection of the alternative article and the accessories.


AS-Interface ClassicLine module

ClassicLine45 2x(2DI/1DO T)M12

{{'OPTIONAL_INFO' | productAvailability | error}}

Dear customer,
Unfortunately, this data sheet is not available in the requested language. If you have any further questions, you can contact us by e-mail.

Best regards
Your ifm team

  • ce
  • asib
Technische Details
Electrical data
Operating voltage [V] 26.5...31.6 DC
Max. current consumption from AS-i [mA] 150
Max. current load total [A] 0.1; (total current for both outputs and sensor supply from AS-i: 100 mA)
Integrated watchdog yes
Input circuit of digital inputs PNP
Sensor supply of the inputs AS-i
Voltage supply [V] 21...30; (via flat cable)
Max. total current rating of inputs [mA] 100
Input current High [mA] 6...10
Input current Low [mA] 0...2
Min. switching level high signal [V] 11
Digital inputs protected against short circuits yes
Electrical design AS-i
Circuit PNP
Voltage range DC [V] AS-i
Max. current load per output [mA] 100
Short-circuit proof yes
Electrically separated no
Operating conditions
Ambient temperature [°C] -25...70
Protection IP 67
Tests / approvals
EN 50295
MTTF [years] 377
AS-i classification
AS-i version 2.1
Extended addressing mode possible yes
AS-i profile S-7.A.E
AS-i I/O configuration [hex] 7
AS-i ID code [hex] A.E
AS-i certificate pending yes
Assignment of the data bits
data bit D0 D1 D2 D3
input 1 2 3 4
socket I-1/2 I-1/2 I-3/4 I-3/4
pin 4 2 4 2
Output 1 2 - -
socket I-1/2 I-3/4 - -
pin 2 2 - -
Mechanical data
Weight [g] 107.4
Type of mounting AS-i interface to FC and SC lower parts
Materials PBT
Displays / operating elements
operation LED, green
errors LED, red
function LED, yellow
Accessories (optional)
Module lower part
Do not connect any of the following points to an external potential:
I-1/2, I-3/4
The connections are electrically connected with the AS-i cable.
Pack quantity 1 pcs.
Electrical connection
Connection contact pins to module lower part, FK / PG:
Connection Connector: M12
ifm electronic gmbh • Friedrichstraße 1 • 45128 Essen — We reserve the right to make technical alterations without prior notice. — EN-GB — AC2502-00 — 04.09.2013 —