1. Homepage
  2. Service
  3. Certificates / Protocols

Certificates / Protocols

Manufacturer's certificate EN10204-2.1 (order code ZC0001)
(according to
DIN50049-2.1)

  • Certifies that the listed articles / article groups conform to the indications in the corresponding data sheet and have been subjected to a 100 % final test.
  • Annex: data sheet
  • Languages: German or English

Manufacturer's certificate EN10204-2.2 (order code ZC0002)
(according to DIN 50049-2.2)

  • Certifies that the listed articles conform to the indications in the corresponding data sheet and have been subjected to a 100 % final test.
  • Annexes: description of the 100 % tests, data sheet and, where applicable, test specification
  • Languages: German or English

The following documents are available for selected fluid sensor products:

Inspection certificate material EN10204-3.1 (order code ZC0003)
(according to DIN 50049-3.1)

  • Results of batch-related tests to prove that the requirements regarding the material characteristics and quality are met.
  • Languages: German / English
  • Applies to the specified article(s) and must be requested when ordering the article.
  • Only issued for fluid sensor products (list of products).

ISO calibration protocol pressure/flow (order code ZC0004(pressure/flow)/ZC0020(flow SD))

  • Created by the manufacturer
  • Languages: German/English
  • Applies to the specified article(s) and must be requested when ordering the sensor. Subsequent orders are only possible if subject unit is returned.
  • Only issued for fluid sensor products (list of products).

DAkkS calibration protocol pressure sensors (order code ZC0005)

  • Created according to DAkkS regulations (Deutsche Akkreditierungsstelle, relevant authority)
  • Languages: German/English
  • Applies to the specified article(s) and must be requested when ordering the sensor. Subsequent orders are only possible if subject unit is returned.
  • Only issued for pressure sensors (list of products).

DAkkS calibration temperature sensors 3-point (order code ZC0013)

  • Created according to DAkkS regulations (Deutsche Akkreditierungsstelle, relevant authority)
  • Language: German/English
  • Calibration at three defined temperatures: 65-85-123 °C
  • Applies to the specified article(s) and must be requested when ordering the sensor. Subsequent orders are only possible if subject unit is returned.
  • Only issued for temperature sensors (list of products).

DAkkS calibration temperature sensors 5-point (order code ZC0014)

  • Created according to DAkkS regulations (Deutsche Akkreditierungsstelle, relevant authority)
  • Language: German/English
  • Calibration at five defined temperatures: 20-65-85-100-123 °C
  • Applies to the specified article(s) and must be requested when ordering the sensor. Subsequent orders are only possible if subject unit is returned.
  • Only issued for temperature sensors (list of products).

DAkkS calibration temperature sensors N-point (order code ZC0015)

  • Created according to DAkkS regulations (Deutsche Akkreditierungsstelle, relevant authority)
  • Language: German/English
  • Number (max. 4) and position of the calibration points according to customer request (-20...150 °C)
  • Applies to the specified article(s) and must be requested when ordering the sensor. Subsequent orders are only possible if subject unit is returned.
  • Only issued for temperature sensors (list of products).

ISO calibration temperature sensors 3-point (oder code ZC0016)

  • Created according to the requirements of DIN EN ISO 9001:2008
  • Language: German/English
  • Calibration at three defined temperatures: 65-85-123 °C
  • Applies to the specified article(s) and must be requested when ordering the sensor. Subsequent orders are only possible if subject unit is returned.
  • Only issued for temperature sensors (list of products).

ISO calibration temperature sensors 5-point (order code ZC0017)

  • Created according to the requirements of DIN EN ISO 9001:2008
  • Languages: German/English
  • Calibration at five defined temperatures: 20-65-85-100-123 °C
  • Applies to the specified article(s) and must be requested when ordering the sensor. Subsequent orders are only possible if subject unit is returned.
  • Only issued for temperature sensors (list of products).

ISO calibration temperature sensors N-point (order code ZC0018)

  • Created according to the requirements of DIN EN ISO 9001:2008
  • Languages: German/English
  • Number (max. 4) and position of the calibration points according to customer request (-20...150 °C)
  • Applies to the specified article(s) and must be requested when ordering the sensor. Subsequent orders are only possible if subject unit is returned.
  • Only issued for temperature sensors (list of products).

Factory calibration for infra-red temperature sensor (order code ZC0061) 

  • Created according to the requirements of DIN EN ISO9001:2008
  • Language: German/English
  • Applies to the specified arcticle(s) and must be requested when ordering the sensor. Subsequent order are only possible when giving the serial number. The certificate will then be dated with the day of calibration.
  • Only issued for temperature sensor (list of products).

A2LA calibration temperature sensors 3-point​ (order code ZC0064) 

  • Created according to A2LA / ILAC MRA
  • Language: German/English
  • Calibration at three defined temperatures: 65-85-123 °C
  • Applies to the specified article(s) and must be requested when ordering the sensor. Subsequent orders are only possible if subject unit is returned.
  • Only issued for temperature sensors (list of products).

A2LA calibration temperature sensors 5-point  (order code ZC0065) 

  • Created according to A2LA / ILAC MRA
  • Language: German/English
  • Calibration at five defined temperatures: 20-65-85-100-123 °C
  • Applies to the specified article(s) and must be requested when ordering the sensor. Subsequent orders are only possible if subject unit is returned.
  • Only issued for temperature sensors (list of products).

A2LA calibration temperature sensors N-point​ (order code ZC0066) 

  • Created according to A2LA / ILAC MRA
  • Language: German/English
  • Number (max. 4) and position of the calibration points according to customer request (-20...200 °C)
  • Applies to the specified article(s) and must be requested when ordering the sensor. Subsequent orders are only possible if subject unit is returned.
  • Only issued for temperature sensors (list of products).

Cleaning for oxygen applications​ (order code ZC0019)

  • Cleaning for oxygen applications (free of oil and grease)
  • The cleaned units are given a special marking and packaging. 
  • Applies to the specified article(s) and must be requested when ordering the sensor. Subsequent orders are not possible.
  • For each unit ZC0019 has to be ordered separately.
  • Only issued for fluid sensor products (list of products).

INMETRO calibration protocol pressure sensors  (order code ZBR003)

  • Created according to INMETRO regulations (relevant authority)
  • Languages: Portuguese
  • Applies to the specified article(s) and must be requested when ordering the sensor.
    Subsequent orders are only possible if subject unit is returned.  

INMETRO calibration protocol flow sensors (order code ZBR002)

  • Created according to INMETRO regulations (relevant authority)
  • Languages: Portuguese
  • Applies to the specified article(s) and must be requested when ordering the sensor. 
    Subsequent orders are only possible if subject unit is returned.  

INMETRO calibration protocol temperature sensors (order code ZBR001)

  • Created according to INMETRO regulations (relevant authority)
  • Languages: Portuguese
  • Applies to the specified article(s) and must be requested when ordering the sensor.
    Subsequent orders are only possible if subject unit is returned.  

You can obtain these documents by contacting your branch office.

Please note that the issuing of the documents will be charged separately