| Product characteristics |
| Measuring range of vibration [g] |
-25...25 |
| Frequency range [Hz] |
0...10000 |
| Measuring principle |
capacitive |
| Application |
| Special feature |
Screened cable; Drag chain suitability |
| Design |
for connection to external diagnostic electronics VSE |
| Application |
vibration detection |
| Electrical data |
| Operating voltage [V] |
7.2...10.8 DC; (cULus: 9 V DC) |
| Current consumption [mA] |
< 15 |
| Min. insulation resistance [MΩ] |
100; (500V DC) |
| Protection class |
III |
| Reverse polarity protection |
yes |
| Sensor type |
microelectromechanical system (MEMS) |
| Outputs |
| Analogue current output [mA] |
0...10 |
| Max. load [Ω] |
300 |
| Measuring/setting range |
| Measuring range of vibration [g] |
-25...25 |
| Frequency range [Hz] |
0...10000 |
| Measuring principle |
capacitive |
| Sensitivity [µA/g] |
142 |
| Number of measurement axes |
1 |
| Accuracy / deviations |
| Linearity deviation |
0,2 % |
| Operating conditions |
| Ambient temperature [°C] |
-30...85 |
| Note on ambient temperature |
|
| Storage temperature [°C] |
-30...85 |
| Protection |
IP 67 |
| Tests / approvals |
| EMC |
| EN 61000-6-2 |
|
| EN 61000-6-3 |
|
| EN 50178 |
|
|
| Shock resistance |
| DIN EN 60068-2-27 |
50 g 11 ms |
|
| Vibration resistance |
| DIN EN 60068-2-20 |
20 g / 10 ... 2000 Hz |
|
| MTTF [years] |
2642 |
| Mechanical data |
| Weight [g] |
257.5 |
| Type of mounting |
M16 x 1,5 |
| Materials |
housing: stainless steel (1.4404 / 316L) |
| Tightening torque [Nm] |
8 |
| Mechanische Überlastfestigkeit [g] |
500 |
| Drag chain suitability |
yes |
| Drag chain suitability |
| bending radius for fixed installation |
: min. 4 x cable diameter |
| bending radius for flexible use |
: min. 15 x cable diameter |
|
| Remarks |
| Pack quantity |
1 pcs. |
| Electrical connection |
|
Cable: 6 m, PUR, Ø 5 mm, shielded; Maximum cable length: 250 m; drain wire connected to the housing; 4 x 0.25 mm² |
