1. Homepage
  2. Products
  3. Identification systems
  4. RFID 13.56 MHz
  5. RFID antennas
  6. DTE604

RFID evaluation unit LF/HF

DTRHF HLRWENUS03

DTE604

{{'OPTIONAL_INFO' | productAvailability | error}}

Dear customer,
Unfortunately, this data sheet is not available in the requested language. If you have any further questions, you can contact us by e-mail.

Best regards
Your ifm team

Download
Technische Details
Application
Radio approval for Europe; Australia; China
Electrical data
Operating voltage [V] 19.2...28.8 DC
Max. current consumption [mA] 500
Protection class III
Operating frequency [MHz] 13,56
RFID standard ISO 15693
Outputs
Max. current load per output [mA] 100; (max.)
Detection zone
Distance write/read head front [mm] 600
Distance write/read head side [mm] 850
Note on distance write/read head
100% transmission power
Distance to the ID tag [mm]
50mm-TAG : <= 150
ISO card : <= 180
Interfaces
Ethernet - TCP/IP
Communication interface Ethernet
Protocol TCP/IP
Factory settings
IP address: 192.168.0.79
subnet mask: 255.255.255.0
gateway IP address: 192.168.0.100
Usage type parameter setting; data transmission
Operating conditions
Ambient temperature [°C] -20...60
Storage temperature [°C] -25...80
Protection IP 67
Tests / approvals
EMC
EN 301 489-3
Shock resistance
IEC 60028-2-27 40 g (6 ms) / bump
50 g (11 ms) / single shock
Vibration resistance
EN 60068-2-6 2 g (10...150 Hz)
Radio approval EN 300 330 V2.1.1
Mechanical data
Weight [g] 641.5
Materials PBT PC; stainless steel; aluminium
Displays / operating elements
Display
voltage supply 1 x LED, green
LED bar display 4 x LED, yellow signal strength ID tag
status 2 x LED, green/red fieldbus interface
status 2 x LED, green/yellow Ethernet
Remarks
Pack quantity 1 pcs.
Electrical connection - Ethernet
ETH1 / ETH2 Connector: 2 x M12
Electrical connection - voltage supply
PWR Connector: 1 x M12
ifm electronic gmbh • Friedrichstraße 1 • 45128 Essen — We reserve the right to make technical alterations without prior notice. — EN-GB — DTE604-00 — 15.03.2019 —