Measurement of gaseous media

Notes:	Very well suitable	Well suitable	Suitable	Not suitable		Available	Not available
	Suitable to some extent - please contact the Service Center at +603 8066 9853 in this case.

	Calorimetric inline sensors	Calorimetric immersion sensors
	Product details	Product details
Measuring principle	Calorimetric	Calorimetric
Accuracy
Pressure loss
Detection of direction
Quantity meter (totaliser)
Media
Non-conductive media
Chemical liquids of low concentration, e.g. sodium hydroxide solution < 5%
Resistant to
Temperature fluctuations
Viscosity changes
Air content
Particles
Pressure peaks
Deposits
Vibrations
Installation
No inlet pipe length required

Calorimetric inline sensors	Special features
Measuring principle Calorimetric inline Product series SD series Measuring range 0.2...200l/min Cross section 1/2"...1 1/2" Medium temperature -10...100°C Pressure rating 40 bar	Requirement Inlet and outlet pipe lengths must be taken into account Thermally conductive medium Avoid rapid temperature changes Industries Automotive industry Robotics and automation Ship automation Food industry Highlights High measurement accuracy High measurement dynamics Low pressure loss Process values Measurement of the total quantity/ totaliser Flow Temperature Pressure Device status/ diagnostics

Calorimetric inline sensors

Special features

Measuring principle

Calorimetric inline

Product series

SD series

Measuring range

0.2...200l/min

Cross section

1/2"...1 1/2"

Medium temperature

-10...100°C

Pressure rating

40 bar

Requirement

Inlet and outlet pipe lengths must be taken into account
Thermally conductive medium
Avoid rapid temperature changes

Industries

Automotive industry
Robotics and automation
Ship automation
Food industry

Highlights

High measurement accuracy
High measurement dynamics
Low pressure loss

Process values

Measurement of the total quantity/ totaliser
Flow
Temperature
Pressure
Device status/ diagnostics

Calorimetric immersion sensors

Special features

Measuring principle

Calorimetric

Product series

SI, SA and SF series

Nominal diameter

Independent of DN

Measuring range

Liquid 0.04...3m/s
Gas 0.6...100m/s

Accuracy

Liquid ± (7% MV + 2% VMR)
Gas ± (10% MV + 2% VMR)

Medium temperature

-20...90°C

Pressure rating

Up to 300 bar

Requirement

Inlet and outlet pipe lengths must be taken into account
Thermally conductive medium
Avoid rapid temperature changes

Industries

Automotive industry
Robotics and automation
Water industry
Ship automation
Food industry

Highlights

Independent of nominal pipe diameters
Diverse material selection for components in contact with the medium
Easy set-up

Process values

Point flow velocity
Temperature
Device status/ diagnostics
Calculated flow

Measurement of gaseous media

Product platforms -> Flow sensors/ flow meters