You probably do not come from: Lithuania. If necessary, change to: United States
  1. Products
  2. Sensors
  3. Analytical sensors
  4. Conductivity sensors
  5. LDL210

inductive conductivity sensor

LDL210

IND CONDUCTIVITY HYG G1 SC

inductive conductivity sensor

LDL210

IND CONDUCTIVITY HYG G1 SC

  • Reduce inaccuracies associated with a time-based cleaning process
  • Improve process performance with flexible measurement points
  • Compact, high-quality sensor design prevents failures and unplanned downtime
  • Simplify your installation and commissioning processes
  • Loss-free signal transmission of measurement values
Digital meets analogue: integrating modern IO-Link sensors the analogue way. The EIO104 allows you to realise two analogue signals from intelligent IO-Link sensors with several process values.
  • fcm
  • ce
  • fda
  • ukca
  • ehedg
  • cul
  • ec19352004
  • 3a
Product characteristics
Number of inputs and outputs Number of analogue outputs: 1
Process connection threaded connection G 1 external thread sealing cone
Application
Special feature Gold-plated contacts
Media conductive liquids
Note on media
water
milk
CIP liquids
Cannot be used for See the operating instructions, chapter "Function and features".
Medium temperature [°C] -25...100; (< 1 h: 150)
Pressure rating [bar] 16
Vacuum resistance [mbar] -1000
Electrical data
Operating voltage [V] 18...30 DC
Current consumption [mA] < 100
Protection class III
Reverse polarity protection yes
Power-on delay time [s] 2
Measuring principle inductive
Inputs / outputs
Number of inputs and outputs Number of analogue outputs: 1
Outputs
Total number of outputs 1
Output signal analogue signal; IO-Link
Output function analogue output; scalable; selectable conductivity / temperature
Number of analogue outputs 1
Analogue current output [mA] 4...20
Max. load [Ω] 500
Measuring/setting range
conductivity measurement
Measuring range [µS/cm] 100...1000000
Resolution [µS/cm]
0...10.000 1
10.000...100.000 10
100.000...1.000.000 100
Temperature measurement
Measuring range [°C] -25...150
Accuracy / deviations
conductivity measurement
Accuracy (in the measuring range) 2 % MW ± 25 µS/cm
Drift [%/K] 0,1 %/K MW ± 25 µS/cm
Repeatability 1 % MW ± 25 µS/cm
Long-term stability 0,5 % MW ± 25 µS/cm
Temperature measurement
Accuracy [K] 20...50 °C: < ± 0,2 K; -25...150 °C: < ± 1,5 K
Repeatability [K] 0,2
Resolution [K] 0.1
Response times
conductivity measurement
Response time [s] < 2; (T09; Damping = 0)
Temperature measurement
Response time [s] < 40; (T09)
Interfaces
Communication interface IO-Link
Transmission type COM2 (38,4 kBaud)
IO-Link revision 1.1
SDCI standard IEC 61131-9
Profiles Measuring Sensor, Identification and Diagnosis
SIO mode no
Required master port type A
Process data analogue 1
Min. process cycle time [ms] 5.6
Supported DeviceIDs
Type of operation DeviceID
default 922
Operating conditions
Ambient temperature [°C] -40...60
Storage temperature [°C] -40...85
Protection IP 68; IP 69K; (7 days / 3 m water depth / 0.3 bar: IP 68)
Tests / approvals
EMC
DIN EN 61000-6-2
DIN EN 61000-6-3 in a closed metal tank
Shock resistance
DIN EN 60068-2-27 50 g (11 ms)
Vibration resistance
DIN EN 60068-2-6 20 g (10...2000 Hz)
UL approval
File number UL E364788
Mechanical data
Weight [g] 736.5
Materials stainless steel (1.4404 / 316L); PEEK; PEI; FKM
Materials (wetted parts) PEEK
Process connection threaded connection G 1 external thread sealing cone
Remarks
Remarks
Attention: The unit must only be installed in a process connection for G1 sealing cone.
The G1A sealing cone of the unit is only suited for adapters with metal end stop.
MW = measured value
Notes Digital meets analogue: integrating modern IO-Link sensors the analogue way. The EIO104 allows you to realise two analogue signals from intelligent IO-Link sensors with several process values.
Pack quantity 1 pcs.
Electrical connection
Connection Connector: 1 x M12 (EN 61067-2-101); coding: A; Contacts: gold-plated