Pressure sensor with display

PE7006

PE-2,5-RDR14-QFRKG/US/ /E

Pressure sensor with display

PE7006

PE-2,5-RDR14-QFRKG/US/ /E

Special seal for use in cleaning processes
Two switching outputs, one of which can be configured as diagnostic output
With long-term stability thanks to high overload protection
Clearly visible 4-digit LED display
High shock and vibration resistance

Convenient operation via buttons or parameter setting via IO-Link

phase-out article

Alternative articles: PE2096 or PE2596 Product comparison: PE7006 / PE2096 / PE2596 When selecting an alternative article and accessories please note that technical data may differ!

Product characteristics

Number of inputs and outputs

Number of digital outputs: 2

Measuring range

0...2.5 bar

0...2500 mbar

0...36.3 psi

0...250 kPa

Process connection

threaded connection G 1/4 internal thread

Application

Special feature

Gold-plated contacts

Application

for industrial applications

Media

liquids and gases

Cannot be used for

oils

Medium temperature [°C]

-25...80

Min. bursting pressure

50 bar

725 psi

5000 kPa

Pressure rating

20 bar

290 psi

2000 kPa

Type of pressure

relative pressure

Electrical data

Operating voltage [V]	18...36 DC; (to SELV/PELV)
Current consumption [mA]	< 50
Min. insulation resistance [MΩ]	100; (500 V DC)
Protection class	III
Reverse polarity protection	yes
Overvoltage protection	yes; (< 40 V)
Power-on delay time [s]	0.3
Integrated watchdog	yes

Inputs / outputs

Number of inputs and outputs	Number of digital outputs: 2

Outputs

Total number of outputs	2
Output signal	switching signal; IO-Link; (configurable)
Electrical design	PNP/NPN
Number of digital outputs	2
Output function	normally open / normally closed; (parameterisable)
Max. voltage drop switching output DC [V]	2
Permanent current rating of switching output DC [mA]	250
Switching frequency DC [Hz]	< 170
Short-circuit protection	yes
Type of short-circuit protection	pulsed

Measuring/setting range

Measuring range

0...2.5 bar

0...2500 mbar

0...36.3 psi

0...250 kPa

Set point SP

0.02...2.5 bar

0.4...36.2 psi

2...250 kPa

Reset point rP

0.01...2.49 bar

0.2...36 psi

1...249 kPa

In steps of

0.01 bar

0.2 psi

1 kPa

Factory setting

	SP1 = 0.63 bar	rP1 = 0.58 bar
	SP2 = 1.88 bar	rP2 = 1.83 bar

Accuracy / deviations

Switch point accuracy [% of the span]	< ± 0,5
Repeatability [% of the span]	< ± 0,1; (with temperature fluctuations < 10 K)
Characteristics deviation [% of the span]	< ± 0,25 (BFSL) / < ± 0,5 (LS); (BFSL = Best Fit Straight Line; LS = limit value setting)
Hysteresis deviation [% of the span]	< ± 0,25
Long-term stability [% of the span]	< ± 0,05; (per 6 months)
Temperature coefficient zero point [% of the span / 10 K]	0,2; (-20...80 °C)
Temperature coefficient span [% of the span / 10 K]	0,2; (-20...80 °C)

Response times

Delay time programmable dS, dr [s]	0; 0,2...50

Software / programming

Parameter setting options	hysteresis / window; normally open / normally closed; diagnostic function; switching logic; switch-on/switch-off delay; Damping; Display unit

Interfaces

Communication interface

IO-Link

Transmission type

COM2 (38,4 kBaud)

IO-Link revision

1.1

Profiles

no profile

SIO mode

yes

Required master port type

Process data analogue

Process data binary

Min. process cycle time [ms]

2.3

Supported DeviceIDs

Type of operation	DeviceID
default	312

Operating conditions

Ambient temperature [°C]	-20...80
Storage temperature [°C]	-40...100
Protection	IP 67

Tests / approvals

EMC

EN 61000-6-2
EN 61000-6-3

Shock resistance

DIN EN 60068-2-27

50 g (11 ms)

Vibration resistance

DIN EN 60068-2-6

20 g (10...2000 Hz)

MTTF [years]

237

Pressure Equipment Directive

Sound engineering practice; can be used for group 2 fluids; group 1 fluids on request

Mechanical data

Weight [g]	261.5
Materials	stainless steel (1.4301 / 304); stainless steel (316L/1.4404); PC; PBT; PEI; FKM; EPDM/X; PTFE
Materials (wetted parts)	stainless steel (316L/1.4404); ceramics (99.9 % Al2O3); sealing of the measuring cell: EPDM
Min. pressure cycles	100 million
Process connection	threaded connection G 1/4 internal thread

Displays / operating elements

Display

Display unit	3 x LED, green
switching status	2 x LED, yellow
function display	alphanumeric display, 4-digit
measured values	alphanumeric display, 4-digit

Remarks

Pack quantity	1 pcs.

Electrical connection

	Connector: 1 x M12; coding: A; Contacts: gold-plated

ifm electronic gmbh • Friedrichstraße 1 • 45128 Essen — We reserve the right to make technical alterations without prior notice. — EN-GB — PE7006-02 — 13.04.2023 —