1. Products
  2. Sensors
  3. Encoders
  4. Incremental encoders
  5. RO3500

Incremental encoder with hollow shaft

RO3500

INCREMENTAL ENCODER BASIC LINE

Incremental encoder with hollow shaft

RO3500

INCREMENTAL ENCODER BASIC LINE

  • ce
  • ukca
  • cul
  • iolink
Product characteristics
Resolution 1...10000; (parameterisable; Factory setting: 1024) resolution
Communication interface IO-Link
Shaft design hollow shaft open to one side
Shaft diameter [mm] 12
Application
Function principle incremental
Detection system magnetic
Electrical data
Operating voltage [V] 4.75...30 DC
Current consumption [mA] < 150
Protection class III
Reverse polarity protection yes
Power-on delay time [s] 0.5
Max. revolution electrical [U/min] 12000
Outputs
Electrical design HTL/TTL
Switching frequency [kHz] 1000
Factory setting
Output function: HTL (50 mA)
Short-circuit protection yes
Phase difference A and B [°] 90
Measuring/setting range
Resolution 1...10000; (parameterisable; Factory setting: 1024) resolution
Accuracy / deviations
Accuracy [°] 0.1
Software / programming
Parameter setting options Resolution; direction of rotation; HTL; TTL
Interfaces
Communication interface IO-Link
Transmission type COM2 (38,4 kBaud)
IO-Link revision 1.1
SIO mode yes
Min. process cycle time [ms] 2.3
Operating conditions
Ambient temperature [°C] -40...80
Note on ambient temperature
for flexibly laid cable: -25 °C
Storage temperature [°C] -40...80
Max. relative air humidity [%] 95; (condensation not permissible)
Protection IP 65; IP 66; (on the housing: IP 67; on the shaft: IP 65)
Tests / approvals
Shock resistance
100 g
Vibration resistance
20 g
MTTF [years] 292
Mechanical data
Weight [g] 478
Dimensions [mm] Ø 58.5 / L = 68.6
Materials flange: aluminium; housing: stainless steel (1.4521 / 444); cable plug: PA
Tightening torque [Nm] < 0.7; (Mounting screw)
Max. revolution, mechanical [U/min] 12000
Max. starting torque [Nm] 2
Reference temperature torque [°C] 20
Shaft design hollow shaft open to one side
Shaft diameter [mm] 12
Shaft material
stainless steel
Installation depth of shaft [mm] 27
Max. axial shaft misalignment [mm] 0,5
Fixing flange Ø 58.5 mm
Electrical connection
IO-Link Cable: 2 m, Ø 4.9 mm; radial, can also be used axially; 5 x 0.14 mm²
Diagrams and graphs
Pulse diagram
direction of rotation clockwise (looking at the shaft)