1. Homepage
  2. Products
  3. Process sensors
  4. Level sensors
  5. Modular transmitter concept
  6. LR2759


Continuous level sensor (guided wave radar)


{{'OPTIONAL_INFO' | productAvailability | error}}

Dear customer,
Unfortunately, this data sheet is not available in the requested language. If you have any further questions, you can contact us by e-mail.

Best regards
Your ifm team

  • For the reliable level control in tanks and containers
  • Hygienic design for the requirements of the food and beverage industry
  • Clearly visible 4-digit LED display
  • Modular system consisting of evaluation unit and probe
  • Adaptation to different container heights through shortening of the probe
  • ce
  • fda
  • ehedg
  • cul
  • iolink
  • ec19352004
  • 3a
Technische Details
Product characteristics
Number of inputs and outputs Number of digital outputs: 1; Number of analogue outputs: 1
Probe length L [mm] 150...2000
Process connection G 1 Aseptoflex Vario
Media Liquids
Dielectric constant of the medium > 5
Recommended media water; hydrous media
Medium temperature [°C] -40...150; (For 3-A applications, the medium temperature is limited to 121 °C and COP cleaning is required.)
Tank pressure [bar] -1...40
Electrical data
Operating voltage [V] 18...30 DC
Current consumption [mA] < 50
Protection class III
Reverse polarity protection yes
Power-on delay time [s] < 3
Inputs / outputs
Number of inputs and outputs Number of digital outputs: 1; Number of analogue outputs: 1
Total number of outputs 2
Output signal switching signal; analogue signal; IO-Link
Electrical design PNP/NPN
Number of digital outputs 1
Output function normally open / normally closed; (parameterisable)
Max. voltage drop switching output DC [V] 2.5
Permanent current rating of switching output DC [mA] 150; (200 (...60 °C))
Number of analogue outputs 1
Analogue current output [mA] 4...20, invertible; (scalable)
Factory setting
Electrical design: NPN
Short-circuit protection yes
Type of short-circuit protection pulsed
Overload protection yes
Measuring/setting range
Probe length L [mm] 150...2000
Active range A [mm] L-40
Inactive range I1 / I2 [mm] 30 / 10
Sampling rate [Hz] 4
Setting range
Set point SP [mm] 15...L-30
Reset point rP [mm] 10... L-35
In steps of [mm] 1
Hysteresis [mm] > 5
Accuracy / deviations
Measuring error [% of the measured value] ± 7 mm
Offset error [mm] 5
Resolution [mm] 1
Zero signal (current) [mA] 4.0
Full signal (current) [mA] 20
Temperature drift per 10 K ± 0.2 %
Communication interface IO-Link
Transmission type COM2 (38,4 kBaud)
IO-Link revision 1.1
SDCI standard IEC 61131-9
IO-Link device ID 0x000283
Profiles Smart Sensor: Process Data Variable; Device Identification, Device Diagnosis
SIO mode yes
Required master port type A
Process data analogue 1
Process data binary 2
Min. process cycle time [ms] 2.3
Operating conditions
Ambient temperature [°C] -40...80
Storage temperature [°C] -40...100
Protection IP 68; IP 69K
Tests / approvals
DIN EN 61000-6-2
DIN EN 61000-6-3 : in a metal tank
DIN EN 61000-6-4 : in a plastic tank
Shock resistance
DIN EN 60068-2-27 50 g (11 ms) / 20 g (6 ms) with reference rod 0.5 m
Vibration resistance
DIN EN 60068-2-6 20 g (10...2000 Hz) / 1 g (5...200 Hz) with reference rod 0.5 m
MTTF [years] 216
Mechanical data
Weight [g] 396.5
Materials stainless steel (1.4404 / 316L); PEI; PFA; PBT; FKM
Materials (wetted parts) stainless steel (1.4404 / 316L); PEEK
Process connection G 1 Aseptoflex Vario
Surface characteristics Ra/Rz of the wetted parts < 0.8
Displays / operating elements
Display unit 3 x LED, green
switching status 2 x LED, yellow
level alphanumeric display, 4-digit
parameter setting alphanumeric display, 4-digit
Pack quantity 1 pcs.
Electrical connection
Connection Connector: 1 x M12; Contacts: gold-plated
Diagrams and graphs
Measurement deviation D at the limits of the active rod range
ifm electronic gmbh • Friedrichstraße 1 • 45128 Essen — We reserve the right to make technical alterations without prior notice. — EN-GB — LR2759-02 — 06.09.2016 —