Inductive sensors


Inductive sensors are nowadays indispensable for industrial usage. As compared to mechanical switches they offer almost ideal conditions: non-contact operation free from any wear and tear, high switching frequencies and accuracy. In addition, they are insensitive to vibration, dust and moisture. Inductive sensors detect all metals without contact.
cylindrical M5 M8 M12 M18 M30 M50 rectangular Ring sensor Tube sensor Slot sensor
metal plastics
up to 2 mm up to 4 mm up to 8 mm up to 15 mm up to 60 mm up to 70 mm up to 120 mm
cable cable with connector connector terminals
hazardous areas (ATEX) electromagnetic field immune increased sensing range optical setting aid food industry metal sensing face mobile systems high temperature correction factor = 1 correction factor = 0 Analogue output 0...10 V Analogue output 4...20 mA

Switching amplifier for Namur sensors according to 94/9/EG (ATEX)

NAMUR switching amplifiers evaluate the sensor signal and control the output. They meet all requirements of the ATEX directives. Switching amplifiers with relay and active transistor and potential-free optocoupler outputs are available. The control circuits hold the approval Ex II (1) GD [EEx ia] IIC. The amplifiers are designed for the connection to NAMUR sensors according to DIN EN 60947-5-6 and mechanical switches. They provide the supply voltage for the intrinsically safe circuit.
housing for rail mounting
1x relay 2x relay 2x opto coupler 2x DC PNP

More information

System description - Inductive sensors