1. Homepage
  2. Products
  3. AC2507

Article no longer available - archive entry

Alternative article: AC5211 – Product comparison: AC2507 / AC5211
Note any deviating technical data for the selection of the alternative article and the accessories.
discontinued article

AC2507

AS-Interface ClassicLine module

ClassicL45 2DI 2DO T M12

{{'OPTIONAL_INFO' | productAvailability | error}}

Dear customer,
Unfortunately, this data sheet is not available in the requested language. If you have any further questions, you can contact us by e-mail.

Best regards
Your ifm team

  • ce
  • asib
Download
Technische Details
Electrical data
Operating voltage [V] 26.5...31.6 DC
Max. current consumption from AS-i [mA] 150
Max. current load total [A] 2
Integrated watchdog yes
Inputs / outputs
Number of inputs and outputs Number of digital inputs: 2; Number of digital outputs: 2
Inputs
Number of digital inputs 2
Input circuit of digital inputs PNP
Sensor supply of the inputs AS-i
Voltage supply [V] 18...30; (via flat cable)
Max. total current rating of inputs [mA] 100
Input current High [mA] 6...10
Input current Low [mA] 0...2
Min. switching level high signal [V] 11
Digital inputs protected against short circuits yes
Outputs
Electrical design AS-i
Number of digital outputs 2
Circuit PNP
Voltage range DC [V] 15...30; (to PELV; via flat cable)
Max. current load per output [mA] 1000; (utilisation category DC-13 (control of electromagnets): 20 W (IEC 60947-5-1))
Short-circuit proof yes
Electrically separated yes
Operating conditions
Ambient temperature [°C] -25...70
Protection IP 67
Tests / approvals
EMC
EN 50295
MTTF [years] 210
AS-i classification
AS-i version 2.1
AS-i addressing IR addressing possible
Extended addressing mode possible no
AS-i profile S-3.0.E
AS-i I/O configuration [hex] 3
AS-i ID code [hex] 0.E
AS-i certificate pending yes
Assignment of the data bits
data bit D0 D1 D2 D3
input 1 2 - -
socket I-1 I-2 - -
pin 2+4 2+4 - -
Output - - 1 2
socket - - O-3 O-4
pin - - 4 4
Mechanical data
Weight [g] 113.4
Type of mounting AS-i interface to FC-E lower parts
Materials PBT
Displays / operating elements
Display
operation LED, green
errors LED, red
function LED, yellow
Accessories
Accessories (optional)
Module lower part
Remarks
Remarks
Inputs and outputs must be electrically isolated.
Do not connect any of the following points to an external potential:
I-, I+, I1, I2
The connections are electrically connected with the AS-i cable.
Notes discontinued article
Pack quantity 1 pcs.
Electrical connection
contact pins to module lower part, FK-E:
Connector: M12
ifm electronic gmbh • Friedrichstraße 1 • 45128 Essen — We reserve the right to make technical alterations without prior notice. — EN-GB — AC2507-00 — 04.09.2013 —