1. Homepage
  2. Products
  3. Process sensors
  4. Level sensors
  5. Use in cleaning agents, coolants and lubricants
  6. LK1024

Please see the technical note under "Downloads"


Electronic level sensor


{{'OPTIONAL_INFO' | productAvailability | error}}

Dear customer,
Unfortunately, this data sheet is not available in the requested language. If you have any further questions, you can contact us by e-mail.

Best regards
Your ifm team

  • ce
  • eac
  • cul
  • iolink
Technische Details
Product characteristics
Number of inputs and outputs Number of digital outputs: 2
Factory setting hydrous coolants; water; media similar to water
Probe length L [mm] 728
Media hydrous coolants; oils; oil-based media; water; media similar to water
Dielectric constant of the medium > 2
Cannot be used for extremely conductive media; adhering media; granulates; bulk material; acids; alkali; food and electroplating industry
Maximum speed of the change of level [mm/s] 300
Tank pressure [bar] 0.5; (when mounting with mounting accessories: E43001 - E43007, E43019)
Medium temperature [°C] 0...35; (with climatic tube E43102: 35...55 °C)
Medium temperature [°C] 0...70
Medium temperature short time [°C] 0...90; (< 1 h)
Medium temperature [°C] 0...35; (with climatic tube E43102: 35...55 °C)
Electrical data
Operating voltage [V] 18...30 DC
Current consumption [mA] < 50
Protection class III
Reverse polarity protection yes
Power-on delay time [s] < 3
Inputs / outputs
Number of inputs and outputs Number of digital outputs: 2
Total number of outputs 2
Output signal switching signal; IO-Link
Electrical design PNP/NPN
Number of digital outputs 2
Output function normally open / normally closed; (parameterisable)
Max. voltage drop switching output DC [V] 2.5
Permanent current rating of switching output DC [mA] 200
Short-circuit protection yes
Type of short-circuit protection thermal, pulsed
Overload protection yes
Measuring/setting range
Factory setting hydrous coolants; water; media similar to water
Probe length L [mm] 728
Active range A [mm] 585
Inactive range I1 / I2 [mm] 104 / 39
Setting range
Set point SP [mm] 60...590
Reset point rP [mm] 50...580
In steps of [mm] 10
Reference point OP [mm] 200 - 240 - 280 - 310 - 350 - 390 - 420 - 460 - 500 - 530 - 570 - 610- OFF
Hysteresis, OP [mm] 4
Accuracy / deviations
Measuring error [% of the final value] ± 5
Repeatability ± 2
Resolution [mm] 5
Software / programming
Parameter setting options hysteresis / window; normally open / normally closed; switching logic; SP/rP position; adjustment OP; medium selection; offset setting; switch-on/switch-off delay
Communication interface IO-Link
Transmission type COM2 (38,4 kBaud)
IO-Link revision 1.1
SDCI standard IEC 61131-9
IO-Link device ID 0x00028E
Profiles Smart Sensor: Process Data Variable; Device Identification, Device Diagnosis
SIO mode yes
Required master port type A
Process data analogue 2
Process data binary 2
Min. process cycle time [ms] 3.2
Operating conditions
Ambient temperature [°C] 0...60
Storage temperature [°C] -25...80
Protection IP 67
Tests / approvals
DIN EN 61000-6-4
DIN EN 61000-6-2
Shock resistance
DIN EN 60068-2-29 15 g (11 ms)
Vibration resistance
DIN EN 60068-2-6 5 g (10...2000 Hz)
MTTF [years] 265
Mechanical data
Weight [g] 545
Dimensions [mm] Ø 16
Materials stainless steel (1.4301 / 304); stainless steel (1.4404 / 316L); FKM; NBR; PBT; PC; PA; PP; TPV
Materials (wetted parts) PP
Displays / operating elements
display unit / status 2 x LED, green (cm, inch)
switching status 2 x LED, yellow
measured values alphanumeric display, 4-digit
parameter setting alphanumeric display, 4-digit
Notes Please see the technical note under "Downloads"
Pack quantity 1 pcs.
Electrical connection
Connection Connector: 1 x M12; Contacts: gold-plated
ifm electronic gmbh • Friedrichstraße 1 • 45128 Essen — We reserve the right to make technical alterations without prior notice. — EN-GB — LK1024-03 — 13.05.2016 —