| Product characteristics |
| Electrical design |
PNP |
| Output function |
2 x OSSD (A1 and A2) |
| Enable zone [mm] |
> 14.5 |
| Housing |
threaded type |
| Dimensions [mm] |
M30 x 1.5 / L = 65 |
| Application |
| Special feature |
Gold-plated contacts |
| Type of operation |
permanent operation |
| Safety-related function |
safe state when damped correctly |
| Application |
Use in mobile and harsh applications |
| Electrical data |
| Operating voltage [V] |
8...32 DC |
| Rated insulation voltage [V] |
60 |
| Current consumption [mA] |
< 20 |
| Protection class |
III |
| Reverse polarity protection |
yes |
| Max. power-on delay time [ms] |
1000 |
| Outputs |
| Electrical design |
PNP |
| Output function |
2 x OSSD (A1 and A2) |
| Max. voltage drop switching output DC [V] |
2.5; (30 mA) |
| Minimum load current [mA] |
1 |
| Permanent current rating of switching output DC [mA] |
50 |
| Switching frequency DC [Hz] |
10 |
| Output data |
Interface type C class 1 |
| Output voltage at 24 V |
compatible with EN 61131-2 inputs type 1, 2 |
| Short-circuit protection |
yes |
| Overload protection |
yes |
| Max. capacitive load CL_max [nF] |
20 |
| Detection zone |
| Enable zone [mm] |
> 14.5 |
| Safe switch-off distance s(ao) [mm] |
< 8 |
| Accuracy / deviations |
| Correction factor |
steel: 1 / stainless steel: 0.7 / brass: 0.5 / aluminium: 0.4 / copper: 0.4 |
| Hysteresis [% of Sr] |
1...10 |
| Response times |
| Response time to safety request [ms] |
5 |
| Response time when approaching the enable zone [ms] |
5 |
| Risk time (response time for safety-related faults) [ms] |
100 |
| Operating conditions |
| Ambient temperature [°C] |
-40...85 |
| Max. relative air humidity [%] |
50; (70 °C; <70 °C: >50 %) |
| Max. height above sea level [m] |
5000 |
| Ionising radiation |
not permissible |
| Protection |
IP 65; IP 67; IP 68; IP 69K; (with ifm socket duly screwed on) |
| Chemical media |
| test according to ISO 16750-5 |
|
|
|
| the following media were tested for 22 hours at 60 °C |
coolants |
|
(HoughtonHocut4480 |
|
Oemeta |
|
HYCUT ET 46) |
| The following media were tested for 22 hours at 75 °C |
hydraulic fluids |
|
(Fuchs Renoling B15 VG 46 HLP |
|
Total BiohydranTMP 4HEES |
|
Fuchs Hydrotherm 46 M HFC) |
|
transmission oils |
|
(Fuchs TITAN ATF 3353 Dexron III) |
|
diesel |
|
biodiesel |
|
urea |
|
(AdBlue) |
|
brake fluid |
|
(K2 TURBO DOT 4) |
| the following media were tested for 22 hours at 23 °C |
corrosion protection |
|
(Sonax special preservation wax ) |
|
cold cleaner |
|
(Sonax cold cleaner S ) |
|
ammonia-based cleaner |
|
(Weco Dr. Webers Salmiak-Konzentrat (concentrated ammonium chloride) ) |
|
battery acid |
| the following media were tested for 2 hours at 23 °C |
wheel rim cleaner |
|
(Sonax Xtreme Plus) |
| the following media were tested for 10 minutes at 23 °C |
premium-grade petrol lead-free |
|
|
|
|
|
|
|
| Tests / approvals |
| EMC |
| industrial environments |
|
| EN 60947-5-3 |
|
| EN 61000-4-2 ESD |
6 kV CD / 8 kV AD |
| EN 61000-4-3 HF radiated |
20 V/m |
| EN 61000-4-4 Burst |
2 kV |
| EN 61000-4-5 Surge |
2 kV |
| EN 61000-4-6 HF conducted |
10 V |
| EN 61000-4-8 |
30 A/m 50/60 Hz / 1000 A/m 0 Hz |
| EN 55011 |
class B |
| mobile applications |
only for operation with central load-dump suppression (58 V) / not for active operation during motor start phase in 12 V systems |
| ISO 10605 ESD |
8 kV CD / 15 kV AD |
| ISO 11452-2, ISO 11452-5 radiated immunity |
100 V/m |
| ISO 7637-2, ISO 16750-2 conducted immunity |
12 V / 24 V |
| pulse |
1 2a 3a 3b 4 5b |
| severity level |
III III III III III III 58V |
| failure criterion |
B B B A A C/B A |
| EN 55025 |
|
|
| Vibration resistance |
| EN 60068-2-6 Fc |
20 g (10...3000 Hz) / 50 sweep cycles, 1 octave per minute, in 3 axes |
|
| Broadband noise |
| EN 60068-2-64 h |
5,9 g (10...2000 Hz) / effective acceleration for chassis mounting |
|
| Shock resistance |
| EN 60068-2-27 Ea |
100 g 11 ms half-sine; 3 shocks each in every direction of the 3 coordinate axes |
|
| Continuous shock resistance |
| EN 60068-2-27 Ea |
40 g 6 ms; 4000 shocks each in every direction of the 3 coordinate axes |
|
| Fast temperature change |
| EN 60068-2-14 Na |
TA = -40°C; TB = 85°C; t1 = 30 min; t2 = 10 s 100 cycles |
|
| Salt spray test |
| EN 60068-2-52 Kb |
severity level 5 (4 test cycles) |
|
| UL approval |
| Ta |
< 70 °C |
| Enclosure type |
Type 1 |
| voltage supply |
Limited Voltage/Current |
| File number UL |
E174191 |
|
| Safety classification |
| Complies with the requirements |
| ISO 13849-1: 2015 category 2, PL d |
| IEC 61508 SIL 2 |
| IEC 62061 SIL 2 |
|
| Mission time TM [h] |
≤ 87600 |
| Mission time TM (additional indication) |
| industrial environments Temperature range -25...70 °C ≤ 175200 |
|
| PFH [1/h] |
< 5E-08 |
| Mechanical data |
| Weight [g] |
196.8 |
| Housing |
threaded type |
| Mounting |
flush mountable |
| Dimensions [mm] |
M30 x 1.5 / L = 65 |
| Thread designation |
M30 x 1.5 |
| Materials |
threaded sleeve: brass white bronze coated; sensing face: LCP; LED window: PEI; lock nuts: brass white bronze coated |
| Tightening torque [Nm] |
< 50 |
| Displays / operating elements |
| Display |
| Display switching status |
4 LED, yellow |
|
| Accessories |
| Items supplied |
|
| Remarks |
| Remarks |
| material for secure mounting not supplied; fixing must be done by the user |
| meets the environmental and EMC requirements for operation in agricultural and forestry machinery, earthworks and construction machines as well as in industrial trucks |
| Unless stated otherwise, all data refer to the reference target plate to IEC 60947-5-2 over the whole temperature range. |
| (FE360 = ST37-2K) 30x30x1 mm |
|
| Pack quantity |
1 pcs. |
| Electrical connection - plug |
| Connection |
Connector: 1 x M12; coding: A; Contacts: gold-plated |
