1. Homepage
  2. Products
  3. Sensors for motion control
  4. Encoders
  5. Incremental encoders without display
  6. RV3110

Incremental encoder with solid shaft

RV3110

INCREMENTAL ENCODER

Incremental encoder with solid shaft

RV3110

INCREMENTAL ENCODER

  • Defined pulse sequence for the reliable detection of rotational speeds
  • For precise position determination and linear measurement
  • User-friendly communication and parameterisation via IO-Link
  • High shock and vibration resistance thanks to magnetic sensing principle
  • Resolution freely programmable from 1 ... 10,000
{{ifmVariantName}}



  • ce
  • iolink
Technical details
Product characteristics
Resolution 1...10000; (parameterisable; Factory setting: 1024) resolution
Communication interface IO-Link
Shaft design solid shaft
Shaft diameter [mm] 10
Application
Function principle incremental
Detection system magnetic
Electrical data
Operating voltage [V] 4.75...30 DC
Current consumption [mA] < 150
Protection class III
Reverse polarity protection yes
Power-on delay time [s] 0.5
Max. revolution electrical [U/min] 12000
Outputs
Electrical design HTL/TTL
Max. current load per output [mA] 50
Switching frequency [kHz] 1000
Factory setting
Output function: HTL (50 mA)
Short-circuit protection yes
Phase difference A and B [°] 90
Measuring/setting range
Resolution 1...10000; (parameterisable; Factory setting: 1024) resolution
Accuracy / deviations
Accuracy [°] 0.1
Software / programming
Parameter setting options Resolution; direction of rotation; HTL; TTL
Interfaces
Communication interface IO-Link
Transmission type COM2 (38,4 kBaud)
IO-Link revision 1.1
SIO mode yes
Min. process cycle time [ms] 2.3
Operating conditions
Ambient temperature [°C] -40...85
Storage temperature [°C] -40...85
Max. relative air humidity [%] 95; (condensation not permissible)
Protection IP 67; (on the housing: IP 67; on the shaft: IP 67)
Tests / approvals
Shock resistance
100 g
Vibration resistance
20 g
Mechanical data
Weight [g] 591.5
Dimensions [mm] Ø 58 / L = 79.5
Materials flange: stainless steel (1.4571/316Ti ); housing: stainless steel (1.4521 / 444); NBR
Max. revolution, mechanical [U/min] 12000
Max. starting torque [Nm] 1
Reference temperature torque [°C] 20
Shaft design solid shaft
Shaft diameter [mm] 10
Shaft material
stainless steel (1.4571/316Ti )
Max. shaft load axial (at the shaft end) [N] 40
Max. shaft load radial (at the shaft end) [N] 60
Fixing flange clamping flange
Electrical connection
IO-Link Connector: 1 x M12, radial, can also be used axially; Moulded body: stainless steel (1.4401 / 316); Maximum cable length: 100 m; (IO-Link: max. 20 m)
Diagrams and graphs
Pulse diagram
direction of rotation clockwise (looking at the shaft)
ifm electronic gmbh • Friedrichstraße 1 • 45128 Essen — We reserve the right to make technical alterations without prior notice. — EN-GB — RV3110-00 —