Product characteristics | |||
---|---|---|---|
Resolution | 8192 steps; 4096 revolutions; 25 bit | ||
Communication interface | PROFIBUS DP | ||
Shaft design | hollow shaft open to one side | ||
Shaft diameter [mm] | 12 | ||
Application | |||
Function principle | absolute | ||
Revolution type | multiturn | ||
Electrical data | |||
Operating voltage [V] | 10...30 DC | ||
Current consumption [mA] | 100; ((24 V)) | ||
Reverse polarity protection | yes | ||
Outputs | |||
Code | binary | ||
Measuring/setting range | |||
Resolution | 8192 steps; 4096 revolutions; 25 bit | ||
Software / programming | |||
Parameter setting options | counting direction of the code values; Resolution; zero point; limit switches HI and LO; motion indicator; separation multiturn/singleturn | ||
Diagnostic functions | alarms; warnings; status; serial number of the encoder | ||
Addressing | address selector switch; 0...126 | ||
Interfaces | |||
Communication interface | PROFIBUS DP | ||
PROFIBUS DP | |||
Transmission standard | DPV2 | ||
Operating conditions | |||
Ambient temperature [°C] | -40...85 | ||
Max. relative air humidity [%] | 98 | ||
Protection | IP 67; (on the housing: IP 67; on the shaft: IP 67) | ||
Tests / approvals | |||
Shock resistance |
|
||
Vibration resistance |
|
||
MTTF [years] | 13.5 | ||
Mechanical data | |||
Weight [g] | 648 | ||
Dimensions [mm] | Ø 58.5 / L = 99 | ||
Materials | aluminium; clamping ring: brass | ||
Max. revolution, mechanical [U/min] | 12000 | ||
Shaft design | hollow shaft open to one side | ||
Shaft diameter [mm] | 12 | ||
Shaft material |
|
||
Max. shaft load axial (at the shaft end) [N] | 40 | ||
Max. shaft load radial (at the shaft end) [N] | 110 | ||
Fixing flange | Stator coupling | ||
Electrical connection | |||
terminal strip in the terminal chamber: | |||
ifm electronic gmbh • Friedrichstraße 1 • 45128 Essen — We reserve the right to make technical alterations without prior notice. — EN-GB — RM3008-00 — 07.05.2014 —
![]() |