| Product characteristics |
| Type of light |
red light |
| Laser protection class |
1 |
| Housing |
rectangular with M18 thread |
| Application |
| Application [m] |
0.03...1.5 |
| Electrical data |
| Operating voltage [V] |
10...30 DC; ("supply class 2" to cULus) |
| Current consumption [mA] |
< 75 |
| Current consumption reference voltage [V] |
24 |
| Protection class |
III |
| Reverse polarity protection |
yes |
| Type of light |
red light |
| Wave length [nm] |
650 |
| Typ. lifetime [h] |
50000 |
| Outputs |
| Electrical design |
PNP |
| Output function |
2 x normally open, 2 x normally closed; (parameterisable) |
| Permanent current rating of switching output DC [mA] |
100; (per output) |
| Type of short-circuit protection |
pulsed |
| Overload protection |
yes |
| Detection zone |
| Max. light spot width [mm] |
5 |
| Max. light spot height [mm] |
5 |
| Light spot dimensions refer to |
at maximum range |
| Background suppression [m] |
0.03...20 |
| Measuring/setting range |
| Measuring range [m] |
0.025...1.5 |
| Sampling rate [Hz] |
33 |
| Interfaces |
| Communication interface |
IO-Link |
| Transmission type |
COM2 (38,4 kBaud) |
| IO-Link revision |
1.1 |
| SDCI standard |
IEC 61131-9 |
| Profiles |
Smart Sensor: Sensor Identification; Binary Data Channel; Process Value; Sensor Diagnosis |
| SIO mode |
yes |
| Required master port type |
A |
| Process data analogue |
2 |
| Process data binary |
2 |
| Min. process cycle time [ms] |
6 |
| Supported DeviceIDs |
| Type of operation |
DeviceID |
| Default |
925 |
|
| Operating conditions |
| Ambient temperature [°C] |
-25...60 |
| Note on ambient temperature |
| In ambient temperatures < -10 °C a warm-up time is necessary. |
| Laser is off. |
|
| Storage temperature [°C] |
-30...80 |
| Protection |
IP 65; IP 67 |
| Tests / approvals |
| EMC |
|
| Laser protection class |
1 |
| Notes on laser protection |
| Caution: |
laser light |
| laser class: |
1 |
|
EN / IEC60825-1:2007 |
|
EN / IEC60825-1:2014 |
|
Complies with 21 CFR 1040 except for deviations pursuant to Laser Notice No. 50, dated June 2007. |
|
| MTTF [years] |
172 |
| Mechanical data |
| Weight [g] |
205.5 |
| Housing |
rectangular with M18 thread |
| Dimensions [mm] |
61.7 x 22.5 x 45.2 |
| Thread designation |
M18 x 1 |
| Materials |
housing: stainless steel (1.4404 / 316L); PPSU; ABS; PMMA; PBT / PC; EPDM; front lens: glass |
| Lens alignment |
side lens |
| Displays / operating elements |
| Display |
| switching status |
2 x LED, yellow |
|
1 x alphanumeric display, 3-digit |
|
| Accessories |
| Items supplied |
|
| Remarks |
| Pack quantity |
1 pcs. |
| Electrical connection |
| Connection |
Connector: 1 x M12; coding: A |
| Diagrams and graphs |
|
|
a:
|
sensor |
|
b:
|
object |
|
c:
|
background |
|
x:
|
distance sensor/object [mm] |
|
y:
|
min. distance object/background [mm] |
|
| hysteresis curve for distance measurement |
|
x:
|
distance sensor/object [mm] |
|
y:
|
min. distance object/background [mm] |
|
1 =
|
background (black 6 % remission) |
|
2 =
|
background (white 90 % remission) |
|
| Other data |
| Parameter |
Setting range |
Factory setting |
| Uni |
cm, inch |
cm |
| OU1 |
Hno, Hnc, Fno, Fnc, OFF |
Hno |
| SP1 [cm] |
3...150 |
150 |
| nP1 [cm] |
3...150 |
20 |
| FSP1 [cm] |
3...150 |
25 |
| OU2 |
Hno, Hnc, Fno, Fnc, OFF |
Hno |
| SP2 [cm] |
3...150 |
3 |
| nP2 [cm] |
3...150 |
30 |
| FP2 [cm] |
3...150 |
35 |
| dS1 [s] |
0...0.1...5 |
0 |
| dr1 [s] |
0...0.1...5 |
0 |
| dS2 [s] |
0...0.1...5 |
0 |
| dr2 [s] |
0...0.1...5 |
0 |
| dFo [s] |
0...0.1...5 |
0.1 |
| dIS |
ON / OFF |
ON |
|
| Repeatability: 6 σ |
|
repeatability of the measured values |
|
| distance |
white (90 % remission) |
black (6 %...90 % remission) |
| 25 mm |
8.0 mm |
15.0 mm |
| 750 mm |
8.0 mm |
15.0 mm |
| 1500 mm |
20.0 mm |
60.0 mm |
|
| The values apply at |
|
| Extraneous light on the object |
< 10 klx |
| constant ambient conditions |
23 °C / 960 hPa |
| minimum power-on time in minutes |
15 |
|
