1. Homepage
  2. Products
  3. Industrial imaging
  4. 3D cameras
  5. 3D cameras
  6. O3X100

3D camera

O3XIOOKG/E1/GM/S/60

O3X100

{{'OPTIONAL_INFO' | productAvailability | error}}

Dear customer,
Unfortunately, this data sheet is not available in the requested language. If you have any further questions, you can contact us by e-mail.

Best regards
Your ifm team

  • ce
Download
Technische Details
Application
Application output of 3D image data
Electrical data
Operating voltage [V] 20.4...28.8 DC; (EN 61131-2)
Current consumption [mA] < 500; (peak current pulsed; typical value: 160)
Power consumption [W] 3.7
Protection class III
Type of light infrared light
Wave length [nm] 850
Internal lighting yes
Detection zone
Operating distance [mm] 50...3000
Note on operating distance
object size: 200 x 200 mm
reflectivity: 18 %
Image resolution [pixels] 224 x 172
Angle of aperture 60 x 45; (horizontal x vertical)
max. reading rate [Hz] 20
Measuring/setting range
Measuring range [m] < 30; (depending on settings, object size, and reflectivity)
Software / programming
Parameter setting options via PC with ifm Vision Assistant or XML-RPC
Interfaces
Communication interface Ethernet
Usage type parameter setting; data transmission
Ethernet
Number of Ethernet interfaces 1
Transmission standard 10Base-T; 100Base-TX
Transmission rate 10; 100
Protocol TCP/IP
Factory settings
IP address: 192.168.0.69
subnet mask: 255.255.255.0
gateway IP address: 192.168.0.201
Operating conditions
Ambient temperature [°C] -10...40
Note on ambient temperature
Housing: < 45° C
see operating instructions
Storage temperature [°C] -40...85
Protection IP 50
Max. immunity to extraneous light [klx] 8
Tests / approvals
EMC
DIN EN 61000-6-3 radiation of interference / residential, commercial and light-industrial environments
DIN EN 61000-6-2 noise immunity / industrial environments
Shock resistance
DIN EN 60068-2-27 50 g / (11 ms) not repetitive
DIN EN 60068-2-27 40 g / (6 ms) repetitive
Vibration resistance
DIN EN 60068-2-6 2 g / (10...150 Hz)
DIN EN 60068-2-64 2.3 g RMS / (10...500 Hz)
Laser protection class 1
Notes on laser protection
Caution: laser light
laser class: 1
IEC 60825-1:2014
Electrical protection
DIN EN 61010-2-201 electrical supply only via PELV circuits
Mechanical data
Weight [g] 266.5
Dimensions [mm] 80 x 43.5 x 21
Materials housing: diecast zinc; front lens: PMMA
Sensorart PMD 3D ToF-Chip
Remarks
Pack quantity 1 pcs.
Electrical connection
Connection Cable: 1 m, PVC
Connection Connector: 1 x RJ45
Other data
Field of view size
without lens distortion correction
measuring range / distance [m] Length [m] Width [m]
0.50 0.60 0.40
1.00 1.10 0.80
1.50 1.70 1.30
2.00 2.30 1.70
2.50 2.80 2.10
3.00 3.40 2.50
Repeatability
measuring range / distance [m] Exposure time Repeatability Accuracy [mm]
Measured distance values (1 Sigma) on grey objects
reflectivity 18 % [mm]
0.1...0.25 200 ± 5 ± 5
0.25...0.5 400 ± 5 ± 5
0.5...1 1000 ± 7 ± 10
1...2 2000 ± 15 ± 20
2...3 2000 ± 60 ± 40
Repeatability
referred to distance measurement of an individual pixel
Measured at centre of image with median filter
Ambient temperature 20° C
Temperature drift
-10...+40° C [mm/K]
0.2
Relative accuracy
typical
± 4
Measured at reflectivity 18...90 %
ifm electronic gmbh • Friedrichstraße 1 • 45128 Essen — We reserve the right to make technical alterations without prior notice. — EN-GB — O3X100-00 — 21.06.2017 —