1. Homepage
  2. Products
  3. Process sensors
  4. Pressure sensors / Vacuum sensors
  5. Flush transmitters for the process technology
  6. PM1506

PM1506

Electronic pressure sensor

PM-2,5-REA12-A-ZVG/US

{{'OPTIONAL_INFO' | productAvailability | error}}

Dear customer,
Unfortunately, this data sheet is not available in the requested language. If you have any further questions, you can contact us by e-mail.

Best regards
Your ifm team

  • Robust stainless steel housing for use in the food and beverage industry
  • Hygienic, flush design
  • Resistant to high-pressure cleaning with aggressive cleaning agents
  • High temperature resistance and high protection rating
  • Integrated temperature measurement via IO-Link
  • acs
  • fcm
  • ce
  • fda
  • ehedg
  • reg31
  • iolink
  • cul
  • ec19352004
  • 3a

Download
Technische Details
Product characteristics
Output signal analogue signal; IO-Link
Measuring range
-125...2500 mbar -1.82...36.26 psi -12.5...250 kPa
Process connection threaded connection G 1/2 external thread sealing cone
Application
Special feature Gold-plated contacts
Measuring element ceramic-capacitive pressure measuring cell
Application hygienic systems
Media viscous media and liquids with suspended particles; liquids and gases
Medium temperature [°C] -25...125; (< 1 h: 150)
Pressure rating
30000 mbar 435 psi 3000 kPa
Min. bursting pressure
50000 mbar 725 psi 5000 kPa
Vacuum resistance [mbar] -1000
Type of pressure relative pressure
No dead space yes
Electrical data
Operating voltage [V] 18...30 DC
Min. insulation resistance [MΩ] 100; (500 V DC)
Protection class III
Reverse polarity protection yes
Integrated watchdog yes
2-wire
Current consumption [mA] 3.5...21.5
Power-on delay time [s] < 1
3-wire
Current consumption [mA] < 45
Power-on delay time [s] < 0.5
Outputs
Total number of outputs 2
Output signal analogue signal; IO-Link
Analogue current output [mA] 4...20; (scalable; 1:5)
Max. load [Ω] 700; (Ub = 24 V; (Ub - 9 V) / 21.5 mA)
Short-circuit proof yes
Overload protection yes
Measuring/setting range
Measuring range
-125...2500 mbar -1.82...36.26 psi -12.5...250 kPa
Analogue start point
-125...2000 mbar -1.82...29 psi -12.5...200 kPa
Analogue end point
375...2500 mbar 5.44...36.26 psi 37.5...250 kPa
In steps of
1 mbar 0.02 psi 0.1 kPa
Factory setting
ASP = 0.0 bar AEP = 2500 mbar
Temperature monitoring
Measuring range [°C] -25...150
Measuring range [°F] -13...302
Accuracy / deviations
Repeatability [% of the span] < ± 0,1; (with temperature fluctuations < 10 K; Turn down 1:1)
Characteristics deviation [% of the span] < ± 0,5 (DIN EN 61298-2); (incl. zero point and span error, non-linearity, hysteresis; Turn down 1:1)
Linearity deviation [% of the span] < ± 0,15; (Turn down 1:1)
Hysteresis deviation [% of the span] < ± 0,15; (Turn down 1:1)
Long-term stability [% of the span] < ± 0,1; (Turn down 1:1; per year)
Temperature coefficient zero point [% of the span / 10 K] < ± 0,1 (-25...85 °C); < ± 0,3 (85...150 °C)
Temperature coefficient span [% of the span / 10 K] < ± 0,1 (-25...85 °C); < ± 0,3 (85...150 °C)
Temperature monitoring
Accuracy [K] ± 2.5 K + (0.045 x (ambient temperature - medium temperature))
Response times
Damping for the analogue output dAA [s] 0...4
2-wire
Step response time analogue output [ms] 30
3-wire
Step response time analogue output [ms] 7
Temperature monitoring
Dynamic response T05 / T09 [s] < 10 / < 25; (DIN EN 60751 water; > 0,9 m/s)
Interfaces
Communication interface IO-Link
Transmission type COM2 (38,4 kBaud)
IO-Link revision 1.1
SDCI standard IEC 61131-9
IO-Link device ID 1024 d / 00 04 00 h
Profiles Smart Sensor ED2: Identification and Diagnosis (0x4000), Measurement Data Channel (0x800A)
SIO mode no
Required master port type A; (when pin 2 not connected: B)
Min. process cycle time [ms] 4.5
IO-Link resolution pressure [mbar] 0.5
IO-Link resolution temperature [K] 0.2
IO-Link functions (cyclical)
function bit length
pressure 16
temperature 16
device status 4
IO-Link functions (acyclical) application specific tag; internal temperature
Operating conditions
Ambient temperature [°C] -25...80
Storage temperature [°C] -40...100
Protection IP 67; IP 68; IP 69K
Tests / approvals
EMC
DIN EN 61326-1
Shock resistance
DIN EN 60068-2-27 50 g (11 ms)
Vibration resistance
DIN EN 60068-2-6 20 g (10...2000 Hz)
MTTF [years] 322
UL approval
UL Approval no. J024
File number UL E174189
Mechanical data
Weight [g] 252.2
Materials stainless steel (1.4404 / 316L); PTFE; FKM
Materials (wetted parts) ceramics (99.9 % Al2O3); PTFE; stainless steel (1.4435 / 316L); surface characteristics: Ra < 0,4 / Rz 4; PEEK
Min. pressure cycles 100 million
Tightening torque [Nm] 20
Process connection threaded connection G 1/2 external thread sealing cone
Remarks
Pack quantity 1 pcs.
Electrical connection
Connection Connector: 1 x M12; Contacts: gold-plated
ifm electronic gmbh • Friedrichstraße 1 • 45128 Essen — We reserve the right to make technical alterations without prior notice. — EN-GB — PM1506-00 — 18.10.2019 —

Videos